D-甘露醇与D-山梨醇在氯化钠水溶液中的稀释焓

应用等温流动微量热法测定了298.15 K时互为旋光异构体的D-甘露醇与D-山梨醇在不同浓度的氯化钠水溶液中的稀释焓, 利用 McMillan-Mayer 理论计算了D-甘露醇与D-山梨醇在不同浓度的氯化钠水溶液中的焓对相互作用系数. 结果表明, D-甘露醇和D-山梨醇在氯化钠水溶液中的焓对相互作用系数h2均为正值, h2的值随着氯化钠浓度的增加皆逐渐增大, 但D-山梨醇的焓对相互作用系数h2增大的速率[dh2 /dm(NaCl)]比 D-甘露醇的要大. 根据两多元醇分子构象结构的差异， 溶质-溶质相互作用和溶质-溶剂相互作用对结果进行了解释.     

有关键能的几个问题

本文讨论了与键能有关的几个问题：即键能和键焓，键离解能和平均键能，原子轨道的成键能力和键的强弱等。     

ANPZ的合成及ANPZ·DMSO(1:1)晶体结构

富氮杂环化合物被认为是理想的高威力含能材料,因为这些化合物大多具有高的分子密度、低易损性和正的生成焓[1].2,6-二氨基-3,5-二硝基吡嗪(ANPZ)是一种富氮杂环含能材料,也是合成新型高能钝感含能材料2,6-二氨基-3,5-二硝基吡嗪-1-氧化物(LLM-105)的前体.     

CaClH2PO4·H2O的合成及其性质的研究

本文介绍了CaClH_2PO_4·H_2O的合成和纯化的方法。用精密量热计系统测定了CaClH_2PO_4·H_2O的标准生成焓在298.15K时为-2282.34kJ mol~(-1)。评述和讨论了热分解反应的化学动力学性质,测定了分解反应的级数和表现活化能。     

N6H6结构和性质的理论研究

采用密度泛函理论的b3lyp方法在6-311＋＋G**基组上对15种分子式为N₆H₆的氮氢化合物进行了理论计算, 并且应用了自然键轨道理论(Nature Bond Orbital, NBO)和分子中的原子理论(Atoms In Molecules, AIM)分析了这些化合物的成键特征和相对稳定性. NBO分析表明N原子孤对电子到相邻的氮氮键的超共轭作用是影响氮氮键长变化的主要因素, AIM计算的氮氮键的键临界点电荷密度与键长呈反比关系. 而且, NBO的立体和超共轭分析表明立体交换排斥能和超共轭作用对这些分子的相对稳定性起了重要作用. G3MP2计算结果表明氮氢化合物的生成热均为正, 并且环状分子的能量和生成热都高于链状分子.     

Theoretical Study on the Antioxidant Activity of Curcumin

The computational results for curcumin at the B3LYP/6-31G(d,p) level show that the enol form of curcumin is more stable than the diketo form because of an intramolecular hydrogen bond, which extends the conjugation effect in the enol chain, formed in the enol structure. Cis-diketone form can not be obtained, presumably due to the strong repulsion between the carbonyl dipoles aligned in parallel. According to the phenolic O-H bond dissociation enthalpy, curcumin in its most stable form can be suggested to be a relatively good antioxidant. In order to avoid overcoming H-bond interaction and to improve the antioxidant activity of curcumin, a catechol moiety was incorporated into curcumin for designing a novel antioxidant. It is found that the designed molecule is much more efficient to scavenge radical than curcumin, comparable to vitamin E. Moreover, the ionization potential of the designed molecule is similar to that of curcumin, indicating that the designed molecule can not display the prooxidant effect.     

烷烃电离能和生成焓的相关性

根据化合物形成过程中价电子能量变化与生成焓之间的关系, 推导出烷烃的生成焓和电离能之间的关系. 以21个烷烃化合物为模型将实验测定的电离能与标准生成焓进行直接关联, 证实了模型方程的适用性, 所得回归方程的相关系数达到0.9999, 估算值与实验值之间的标准偏差仅为0.03 eV. 同时还利用实验测定的标准生成焓对一系列烷烃的电离能作了预测.     

聚碳硅烷的高温高压生成机理研究

分别以聚二甲基硅烷(PDMS)、液态聚硅烷(LPS)及PDMS裂解剩余物(LPCS)为原料,在不同的温度下高压合成聚碳硅烷(PCS),采用红外、紫外、核磁共振、分子量及其分布等分析PCS的组成、结构随温度的变化.同时,采用改变减压蒸馏温度的办法,对PCS进行分级,收集在不同蒸馏温度下的馏分,通过对一系列馏分进行了IR分析,以此推测PCS的转化过程.研究表明,PCS的生成过程是随着温度的升高,PDMS、LPS中键能较低的Si—Si键断裂,逐渐转变成为键能较高的Si—C键,转化为低分子的碳硅烷;随着温度的升高,碳硅烷分子间发生脱氢、脱甲烷缩合反应使产物的分子量逐渐长大,生成PCS.     

Thermochemistry on the Complex of Erbium Perchlorate with L-α-Glutamic Acid [Er2（L-Glu）2（H2O）6]（ClO4）4·6H2O（s）

A coordination compound of erbium perchlorate with L-α-glutamic acid, [Er2（Glu）2（H2O）6]（ClO4）4·6H2O（s）, was synthesized. By chemical analysis, elemental analysis, FTIR, TG/DTG, and comparison with relevant literatures, its chemical composition and structure were established. The mechanism of thermal decomposition of the complex was deduced on the basis of the TG/DTG analysis. Low-temperature heat capacities were measured by a precision automated adiabatic calorimeter from 78 to 318 K. An endothermic peak in the heat capacity curve was observed over the temperature region of 290-318 K, which was ascribed to a solid-to-solid phase transition. The temperature Ttrans, the enthalpy △transHm and the entropy △transSm of the phase transition for the compound were determined to be： （308.73±0.45） K, （10.49±0.05） kJ·mol^-1 and （33.9±0.2） J·K^-1·mol^-1. Polynomial equation of heat capacities as a function of the temperature in the region of 78-290 K was fitted by the least square method. Standard molar enthalpies of dissolution of the mixture [2ErCl3·6H2O（s）＋2L-Glu（s）＋6NaClO4·H2O（s）] and the mixture {[Er2（Glu）2（H2O）6]（ClO4）4·6H2O（s）＋6NaCl（s）} in 100 mL of 2 mol·dm^-3 HClO4 as calorimetric solvent, and {2HClO4（1）} in the solution A＇ at T=298.15 K were measured to be, △dHm,1=（31.552±0.026） kJ·mol^-1, △dHm,2 = （41.302±0.034） kJ·mol^-1, and △dHm,3 = （ 14.986 ± 0.064） kJ·mol^-1, respectively. In accordance with Hess law, the standard molar enthalpy of formation of the complex was determined as △fHm-=-（7551.0±2.4） kJ·mol^-1 by using an isoperibol solution-reaction calorimeter and designing a thermochemical cycle.     

焓差试验室基于全自动运行的节能改造

介绍了焓差法空调器性能测试装置的基本构造,在此基础上作者提出了对原试验装置进行全自动以及节能改造的方案,并对测控软件进行了二次开发。改造结果表明,该方案提高了试验室的测试效率,降低了试验人员的工作强度,同时也降低了试验室运行能耗。