Electrical Characteristics of Copper Phthalocyanine Thin-Film Transistors with Polyamide-6/Polytetrafluoroethylene Gate Insulator

Polyamide-6（PA 6）/polytetrafluoroethylene is studied as a potential gate dielectric for flexible organic thin film transistors. The same method used for the formation of organic semiconductor and gate dielectric films greatly simplifies the fabrication process of devices. The fabricated transistors show good electrical characteristics. Ambipolar behaviour is observed even when the device is operated in air.     

Efficiency Enhancement of Dye-Sensitized Solar Cells： Using Salt CuI as an Additive in an Ionic Liquid

Energy conversion efficiency of the dye-sensitized solar cell is improved from 3.5% to 4.5% by adding a small amount of CuI into an ionic liquid electrolyte. It is found that other copper-I salts, for example, CuBr, have the same effect for the dye-sensitized solar cell. Experimental results show that no Cu^2＋ ions exist in this electrolyte. It is suggested that this improvement is caused by the adsorption of Cu^＋ onto the TiO2 porous film.     

新型菁类染料聚集体构筑和它的非线性光学特性研究

采用旋涂法制备了一种五甲川菁染料的超薄膜,利用原子力显微,椭偏仪、UV-Vis吸收光谱、红外光谱、小角X射线衍射等对薄膜的形貌和线性光谱性质进行了研究表征,结果表明染料在薄膜中形成了有序而稳定的J-聚集体,前向简并四波混频(DFWM)技术研究表明由于分子的聚集作用引起三阶非线性极化率的增大(χ(3)=2.55×10-12esu),利用激子耦合模型初步分析和讨论了产生非线性效应增强的内在机制。     

含“单”及“双”吡唑啉基化合物的光致发光和电致发光的 …

对７种含“单”或“双”吡唑啉化合物在溶液在固体器「ＩＴＯ／ＴＰＤ／ＴＰＢ１－２％ＥＰ／ＴＰＢＩ／Ｍｇ－Ａｇ」中作为掺杂发光材料的电致发光特性地研究，结果表明，由吡唑啉化合物所构成的器件具有优良的电致发光特。     

Dye-sensitized solid-state solar cells fabricated by screen-printed TiO_2 thin film with addition of polystyrene balls

The screen-printed nanoporous TiO2 thin film was employed to fabricate dye-sensitized solid-state solar cells using CuI as hole-transport materials. The solar cell based on nanoporous TiO2 thin film with large pores formed by the addition of polystyrene balls with diameter of 200 nm to the TiO2 paste exhibits photovoltaic performance enhancement, which is attributed to the good contact of CuI with surface of dye-sensitized thin film due to easy penetration of CuI in the film with large pores.     

用等值宽度法测量fs脉冲宽度

本文提出利用等值宽度测量fs光脉冲持续时间的方法.给出了脉冲形状为sech~2 (t/T)、exp(-2t~2/T~2)和exp(-2|t|/T)的干涉相关曲线上包络与相应二阶强度相关曲线半宽度等值的位置,它们分别是3.984、4.875和4.928.定义了两种相关测量的临界延迟速度.理论分析与实验结果符合得很好.所得结果表明,该测量方法可将常规超短脉冲相关测量的时间分辨率提高几倍至几十倍.     

紫外分光光度法测定直接耐晒翠蓝GB染色强度的方法研究

在介质水中，直接耐晒翠蓝GB在609nm处有特征吸收峰，据此建立了一种紫外分光光度法测定直接耐晒翠蓝GB染色强度的方法。     

利用光电流光谱进行脉冲染料激光器波长绝对标定

可调谐激光器取代通用的波长选择元件(如单色仪或干涉仪),作为连续可调谐的单色光源与光学混频技术相结合,能够提供从真空紫外到远红外的宽阔光谱范围内的强光源,为研究原子、分子、固体和等离子体的结构提供了许多新的可能性。因此,可调谐激光器目前广泛地应用在物理、化学、