酶促聚合和原子转移自由基聚合“一锅法”合成嵌段聚合物及其性能表征

用酶促聚合和原子转移自由基聚合相结合的"一锅法"合成了聚甲基丙烯酸正丁酯嵌段聚10-羟基癸酸[PBMA-b-P(10-HD)],通过核磁共振(1H NMR)、傅里叶红外光谱(FTIR)和凝胶渗透色谱(GPC)对其结构以及分子量与其分子量分布进行了表征,并通过动态光散射仪(DLS)和原子力显微镜(AFM)对聚合物在水溶液中的性质进行了研究.所得嵌段聚合物纳米粒子呈球形结构,平均直径为135 nm左右.     

Synthesis and characterization of random or gradient butadiene-p-methylstyrene copolymers via anionic polymerization

Copolymers of 1,3-butadiene and p-methylstyrene （p-MS） were synthesized via anionic polymerization. A benzophenone-potassium complex was added to tune the reactivity ratio of the two monomers, leading to random and gradient composition alonglthe copolymer chain. The overall composition and microstructure could be controlled and well characterized by GPC and H-NMR. The p-MS was distributed from gradient to random with increasing the content of the benzophenone-potassium complex, and the 1,2-microstrucmre in the polybutadiene sequence increased at the same time. The hydrogenation of the copolymer of 1,3-butadiene and p-MS resulted in the corresponding saturated copolymer with well- defined structure and narrow molecular weight distribution.     

两亲性嵌段共聚物的自组装及载药胶束的研究

采用可逆-加成-断裂链转移自由基聚合(RAFT)技术合成了两亲性嵌段共聚物聚苯乙烯-b-聚甲基丙烯酸聚乙二醇单甲醚-b-聚苯乙烯(PSt-b-POEOMA-b-PSt),通过FT-IR、1 HNMR、GPC确定共聚物的结构。将三个具有不同嵌段比的共聚物在水溶液中自组装,通过透射电子显微镜(TEM)观察得到的胶束的形貌,发现随着亲水性嵌段的比例减小,胶束的直径略微减小。通过透析方法,以共聚物作为载体,负载维生素E,TEM观察载药胶束的形貌,仍然为核-壳状的球形胶束。差示扫描量热仪(DSC)测试共聚物载药胶束前后的热性能,发现药物分子在载入内核的过程中,聚苯乙烯的玻璃化转变温度(Tg)有所降低。通过紫外(UV)分析计算得出共聚物的药物负载量(DLC)为70%～80%。     

低成本低聚合度结晶共聚物基太阳能电池

研究了一种由低聚合度的聚[2,6-(4,4-双-(2-乙基己基)-4H-环戊[2,1-b;3,4-b’]双噻吩)-交替-4,7-(2,1,3-苯并噻二唑)](LDP-PCPDTBT)、聚甲基丙烯酸甲酯(PMMA)和[6,6]-苯基-C61-丁酸甲酯(PC61BM)组成的三组分共混薄膜。通过加入溶剂添加剂1,8-二溴辛烷(DBO)进行处理,在未加入溶剂添加剂时,LDP-PCPDTBT相和PC61BM相在PMMA的基质中分别处于无定形和结晶态;应用DBO促进了LDP-PCPDTBT成分的结晶和PC61BM成分的聚集,开路电压明显提高,PMMA基质中的LDP-PCPDTBT和PC61BM的相分离尺度优化,太阳能电池的能量转换效率提高近50%。研究表明,低聚合度交替共聚物能够作为有效的给体材料,与PMMA联合使用利于降低有机太阳能电池材料的成本。     

可逆加成-断裂链转移方法合成两亲液晶嵌段功能大分子及其自组装的研究

采用可逆加成-断裂链转移(RAFT)可控聚合反应方法,合成制备了一系列窄分子量分布、结构规整的两亲液晶嵌段功能大分子聚甲基丙烯酸亚己基胆固醇酯-b-聚甲基丙烯酸羟乙酯(PMA6Chol-block-PHEMA).运用核磁共振(NMR)、凝胶渗透色谱仪(GPC)、示差扫描热分析仪(DSC)和热失重分析仪(TGA)对制备所得两亲嵌段功能大分子的化学结构、热物理性能以及液晶相结构与转变温度进行了研究.在此基础上,采用纳米沉淀法研究了所得系列液晶嵌段功能大分子在混合溶剂中的自组装,制备得到微米尺度球形组装体.研究结果表明刚性胆固醇液晶共聚单元的存在对于溶液自组装产生重要影响.     

Novel Donor-Acceptor Copolymers Based on Dithienosilole and Ketone Modified Thieno[3,4-b]thiophene for Photovoltaic Application

Two novel donor-acceptor （D-A） copolymers containing dithienosilole （DTS） donor unit and ketone modified thieno[3,4-b]thiophene （TT） acceptor unit, namely, poly{4,4＇-bis（2-ethylhexyl）dithieno[3,2-b：2＇,Y-d]silole-5,5＇-diyl- alt-l-（thieno[3,4-b]thiophen-2-yl）-2-ethylhexan-l-one} （PDTSTT） and poly{4,4＇-bis（2-ethylhexyl）dithieno[3,2- b：2＇,3＇-d]silole-5,5＇-diyl-alt- 1-（4,6-bis（4-ethylhexylthien-2-yl）thieno[3,4-b]thiophen-2-yl）-2-ethylhexan- 1-one} （PD- TSDTTT）, were synthesized for the application in polymer solar cells （PSCs）, and the effects of thiophene bridge on the structural geometry and photovoiltaie performance have been investigated. The polymer PDTSTT and PDTSDTTT have the electrochemical bandgaps of 1.54 and 2.02 eV, together with low-lying HOMO energy levels of-5.47 and -5.37 eV, respectively. Molecular geometry simulation result shows that compared with PDTSTT, the insertion of thiophene bridge in PDTSDTTT can well relieve the steric hindrance between the TT and DTS unit, as confirmed by the reduced dihedral angle between DTS and DTTT unit. Under the illumination of AM 1.5G, 100 mW/cm2, the PSC based on PDTSDTTT/PC61BM （1 ： 1, w ： w） demonstrates a power conversion efficiency of 1.0%, which is significantly improved in comparison with the device based on PDTSTT/PC61BM （1 ： 2, w ： w） under the same experimental condition. This is because the enhanced planarity and increased effective conjugation of the main chain in PDTSDTTT promote the more favorable morphology for charge transportation, although PDTSTT possesses the broader absorption band than PDTSDTTT.     

聚乙二醇/四氢呋喃三臂嵌段共聚醚的合成研究

以三臂聚乙二醇、四氢呋喃为主要原料,在三氟化硼乙醚的催化作用下进行阳离子开环聚合反应,合成了聚乙二醇-四氢呋喃三臂嵌段共聚醚.通过正交试验考察了反应时间、配料比、催化剂用量和助开环剂用量等因素对所合成的嵌段共聚醚羟值的影响,得到了合成较大相对分子质量三臂嵌段共聚醚的较佳合成条件,并采用红外光谱法、凝胶渗透色谱法、核磁共振测试对所合成的共聚醚进行了表征.     

主链含酞和芴结构的无定形聚芳醚酮的合成

通过共聚改性在酚酞聚芳醚酮(PEK-C)的主链上引入含芴侧基,制备了一系列主链含酞和芴结构的线性高分子量无定形聚芳醚酮无规共聚物.通过傅里叶红外光谱(FTIR)、核磁共振谱(1H,13C NMR)等手段确定了共聚物结构.凝胶渗透色谱(GPC)数据表明,共聚物的Mn>6.0×104,Mw>1.0×105,PDI(Mw/Mn)范围在1.6~1.7之间.X射线衍射(XRD)数据表明共聚物系无定形结构,差示扫描量热法(DSC)和热重分析(TGA)测试表明聚合物具有良好的耐热性;初始热分解温度高于467℃;700℃时残炭率大于58.9%;共聚物呈现单一的玻璃化转变温度(Tg>243℃).当酚酞与双酚芴摩尔比在3∶7~5∶5范围时,共聚物的弹性模量和断裂伸长率显著提高,可分别达到3.1 GPa和58%,是酚酞聚芳醚酮的1.4倍和8.3倍.这类含酞和芴侧基的无定形聚芳醚酮保持了在氯仿、二氯甲烷、四氢呋喃(THF)和甲基吡咯烷酮(NMP)等极性非质子溶剂中良好的溶解性能,并显著提高了聚合物的力学性能和热性能.     

环形嵌段共聚物的胶束化行为模拟简

利用Monte Carlo模拟,对比了相同组成下环形二嵌段共聚物AB和线形三嵌段共聚物ABA在选择性溶剂中的胶束化行为. 结果发现,相同链组成的环形和线形嵌段共聚物的临界胶束浓度(cmc)的差别与A嵌段的比例(fA)及B嵌段间的吸引强度(ε)密切相关. 在fA较小、ε较大的情况下,相应环形嵌段共聚物的cmc值更小;而在fA较大、ε较小的情况下,线形嵌段共聚物的cmc值更小. 为了进一步理解胶束化行为同fA及ε的关系,计算了胶束化过程中熵和势能部分对自由能的贡献. 结果表明,在所研究的fA和ε范围内,环形嵌段共聚物形成胶束时的熵损失更小,因而从熵贡献角度来看,环形嵌段共聚物更易发生胶束化. 而从势能贡献角度来看,当fA较小、ε较大时,环形嵌段共聚物形成胶束时势能有较大程度的降低,对自由能的贡献更大,因而此时环形嵌段共聚物更易发生胶束化. 而当fA较大、ε较小时,线形嵌段共聚物形成胶束时势能有较大程度的降低,对自由能的贡献更大,因而此时线形嵌段共聚物更易发生胶束化. 由此可见,对体系的胶束化自由能进行系统分析,有助于更好地理解环形和线形嵌段共聚物的胶束化行为.     

Construction of photoresponsive supramolecular micelles based on ethyl cellulose graft copolymer

In this work, a UV-Visible light controlled supramolecular system based on ethyl cellulose(EC) was constructed, combining the host-guest interaction of β-cyclodextrin(β-CD) group and trans-isomer of azobenzene(tAzo) group. To link β-CD to the hydrophobic section, renewable EC was used as macroinitiator to initiate the polymerization of ε-caprolactone(ε-CL) to form biocompatible and biodegradable comb copolymer EC-g-PCL, and β-CD was attached to the end of PCL side chain via click reaction. Meanwhile, hydrophilic PEG-tAzo was obtained by N,N'-dicyclohexylcarbodiimide(DCC) coupling. Then, the structures of the products were characterized by nuclear magnetic resonance(NMR) and gel permeation chromatography(GPC). Subsequently, with the formation of inclusion complexes by β-CD and tAzo groups, the obtained EC-g-PCL-β-CD/PEG-tAzo supramolecular system self-assembled in water with hydrophobic EC-g-PCL-β-CD as core and hydrophilic PEG-tAzo as shell. Furthermore, dynamic light scattering(DLS) and transmission electron microscopy(TEM) were utilized to investigate the particle size and size distribution, while NMR and UV-Vis spectra were applied to explore the UV-Visible light stimuli-responsiveness of the micelles.