岩盐型ZnO纳米微粒的光电子发射结构

报道了岩盐型氧化锌纳米微粒的X射线光电子发射结构,发现其中3d电子的强烈成键作用,还存在着3d-4sp杂化和离域电子弛豫态的贡献,表现出与纤锌矿型明显的差异. 关键词：     

YZr2OZr3:Er3+纳米晶anti-Stokes发光性质的研究

采用均相沉积法制备了不同Er³⁺离子浓度掺杂的Y₂O₃纳米晶, 应用XRD，SEM和PL光谱对该体系材料进行了表征.在Y₂O₃:Er³⁺纳米材料体系中, 观察和研究了Stokes及anti-Stokes PL谱强度与Er³⁺离子摩尔浓度变化的关系, 当Er³⁺离子浓度为2.0mol%时, anti-Stokes PL强度最强.粉末X 关键词： 氧化钇纳米晶 anti-Stokes PL 双光子吸收     

ICP－AES法测定富锗酵母中微量元素

本文采用美国ＬｅｅｍａｎＬａｂｓ公司中阶梯光栅光谱仪测定了人工培养的富锗酵母中高含量锗及镁、铜、锌、铁、钾、钠等微量元素，研究了富锗样品的前处理方法，样品加标回收率在９０％－１０３％之间，测量相对标准偏差：锗１０％，镁、铜、锌、铁、钾、钠等元素小于７％。     

一种新型有机电致微腔结构的双模发射

采用结构Glass／DBR／ITO／NPB／NPB：Alq／Alq／Al制作了有机微腔电致发光器件。将空穴传输材料与发光材料以一定比例混合作为发光层，为了便于对比，在不改变有机层的膜厚的情况下同时制作了传统的异质结微腔器件，发现两种器件的发光光谱有很大不同，器件的复合效率与传统的异质结器件相比也得到了很大提高，这是因为将两种有机材料混合能消除界面势垒，提高器件的复合效率，从而提高了器件的发光性能，实现了微腔双模发射，且两个模式的半峰全宽分别为8nm和12nm。通过进一步优化器件结构可以实现微腔白光发射。     

小型化长脉冲二极管设计与实验

在长脉冲高功率微波源研究中关键的部件是二极管，由于阴极爆炸发射产生的阴极等离子体的热扩散，为防止二极管短路，长脉冲二极管通常比一般二极管阴阳极间距大，尺寸也相应较大。原有的长脉冲加速器使用的二极管如图1所示，这也是美国BANSHEE加速器采用的二极管结构。使用的二极管是为满足L波段高功率微波器件的需要，产生电子束电压500kV，电流3kA，脉宽1．5μs，束截面内外径为φ5．7，φ7．3cm。现在为了满足开展S波段相对论速调管研究需要，设计了新的小型化二极管，产生电子束环内外直径约φ4.3，φ3．7cm。     

GPS/SINS组合导航系统在运载火箭中的应用

针对运载火箭特点,着重研究在发射惯性坐标系下,位置、速度组合模式的GPS/SINS组合导航算法,推导了该坐标系下的惯导一阶误差传播方程,建立了该坐标系下GPS/SINS组合导航系统的状态方程和观测方程,并进行了相关数学仿真验证。仿真结果表明,在该坐标系中,GPS/SINS组合导航算法能较准确地给出运载火箭的位置、速度和姿态信息,提高运载火箭制导精度。     

基于CT算法的束团横向相空间测量

精确测量束团的发射度和横向相空间, 在高亮度电子束的产生和应用中具有重要意义. 传统测量方法在测量发射度时需要对束团在相空间内分布进行初始假设, 且只能给出相椭圆的twiss参数;基于CT(computerized tomography)算法的束团横向相空间测量方法无需先验假设, 能给出粒子在相空间内的真实分布, 测量结果更为精确. 介绍了基于CT算法的束团横向相空间测量的原理和初步实验结果, 并与四极透镜扫描法测量的结果进行了比较.     

Spatially Inhomogeneous Gain Modification in Photonic Crystals

The electric and magnetic energy distributions in photonic crystals （PC） are calculated by using the plane wave expansion （PWE） method. Even though the total electric and magnetic energy in each unit cell of photonic crystals are equal to each other, the ratio of electric and magnetic energy densities varies depending on the local position. Based on Fermi＇s golden rule, the optical gain is analysed in the full quantum framework that takes the nonuniform energy density ratio into account. This nonuniform energy density ratio in photonic crystals, defined in an equal form as gain modification factor, leads to spatially inhomogeneous modification of optical gain. Results reported in the paper provide a new perspective for analysing gain characteristics, as well as the lasing properties, in photonic crystals.     

Design of Two-Dimensional Photonic Crystal Edge Emitting Laser for Photonic Integrated Circuits

An edge emitting laser based on two-dimensional photonic crystal slabs is proposed. The device consists of a square lattice microcavity, which is composed of two structures with the same period but different radius of air-holes, and a waveguide. In the cavity, laser resonance in the inner structure benefits from not only the anomalous dispersion characteristic of the first band-edge at the M point in the first Brillouin-zone but also zero photon states in the outer structure. A line defect waveguide is introduced in the outer structure for extracting photons from the inner cavity. Three-dimensional finite-difference time-domain simulations apparently show the in-plane laser output from the waveguide. The microcavity has an effective mode volume of about 3.2（λ/nslab）^3 for oscillation mode and the quality factor of the device including line defect waveguide is estimated to be as high as 1300.     

加权增量卡尔曼滤波法在ICP－AES中的应用

卡尔曼滤波法用于ＩＣＰ－ＡＥＳ分析时，在白色噪音情况下能给出准确的分析结果，当试样的某些组分未知时，测量噪音将不是白色的，分析结果将不准确。本文提出了一种加权增量卡尔曼滤波法来解决这个问题。