Cu2O/TiO2-Bi2WO6三元复合催化剂的制备及光催化性能研究

采用水热法制备花状Bi2 WO6,并利用超声分散法制备了Cu2 O/TiO2-Bi2 WO6复合光催化剂,通过FESEM、XRD、XPS、FI-IR、UV-vis DRS和PL对光催化剂进行了分析和表征.表征结果证明:花状Bi2 WO6表面负载着碎片状的TiO2和立方体Cu2 O形成Cu2 O/TiO2-Bi2 WO6复合光催化剂;以短链脂肪酸(SCFAs)为牺牲剂,考察复合光催化剂的光催化产生氢气和烷烃的性能.实验结果表明:Cu2 O/TiO2-Bi2 WO6复合光催化剂以乙酸为牺牲剂,主要产氢气和甲烷,降解率高达91.82;;以丙酸为牺牲剂,产物主要是乙烷和丁烷,降解率高达90.70;;以丁酸为牺牲剂,除了氢气,甲烷,乙烷,丙烷,丁烷外,气体产物还含有一定量的戊烷,其降解率高达91.50;.结合反应液中间产物的成分进行检测,由此推断出光催化反应的可能机理.     

松木-聚氯乙烯复合材料催化热解特性的研究

通过热重法研究了松木与聚氯乙烯复合材料的催化热解特性,结果表明聚氯乙烯脱氯阶段与松木的纤维素、半纤维素热分解阶段温度区间重合,二者共热解时存在协同效应,并且HCl的释放对纤维素的脱水反应能够产生催化作用,HCl释放也对木质素的热分解及碳化反应有着明显的催化作用,导致二者共热解制备的碳化物产率提高,约为29.61%。并且利用元素分析仪、扫描电镜和能谱仪对成碳材料进行表征分析,结果表明成碳材料表面粗糙呈现多孔结构,其碳元素含量较高达到74.67%。     

Surface passivation in n-type silicon and its application in silicon drift detector

Based on the surface passivation of n-type silicon in a silicon drift detector(SDD), we propose a new passivation structure of SiO2/Al2O3/SiO2 passivation stacks. Since the SiO2 formed by the nitric-acid-oxidation-of-silicon(NAOS)method has good compactness and simple process, the first layer film is formed by the NAOS method. The Al2O3 film is also introduced into the passivation stacks owing to exceptional advantages such as good interface characteristic and simple process. In addition, for requirements of thickness and deposition temperature, the third layer of the SiO2 film is deposited by plasma enhanced chemical vapor deposition(PECVD). The deposition of the SiO2 film by PECVD is a low-temperature process and has a high deposition rate, which causes little damage to the device and makes the SiO2 film very suitable for serving as the third passivation layer. The passivation approach of stacks can saturate dangling bonds at the interface between stacks and the silicon substrate, and provide positive charge to optimize the field passivation of the n-type substrate.The passivation method ultimately achieves a good combination of chemical and field passivations. Experimental results show that with the passivation structure of SiO2/Al2O3/SiO2, the final minority carrier lifetime reaches 5223 μs at injection of 5×10¹⁵ cm^-3. When it is applied to the passivation of SDD, the leakage current is reduced to the order of nA.     

催化动力学光度法测定水中痕量铁

本文研究了ｐｈ５．０的ＨＡｃ－ＮａＡｃ介质中，痕量铁催化过氧化氢氧化紫脲酸的褪色反应，建立了催化动力学光度法测定痕量铁的新方法，方法的线性范围０－０．４０，０．４０－２．０μｇ／２５ｍＬ，检出限为８×１０＾－１１ｇ／ｍＬ，用于水样中痕量铁的测定，结果满意。     

溶胶-凝胶制备技术与新型催化材料Ⅲ.溶胶粒子表面修饰方法制备催化膜

提出用溶胶粒子表面修饰方法，结合溶胶凝胶技术制备无机催化膜．该方法的基本原理是利用合适的金属配合物在胶粒表面的吸附作用，经溶胶凝胶过程，将活性组分结合到无机膜中．实验测定结果表明：（ＮｉＥＤＴＡ）２－，ＶＯ－３，ＭｏＯ２－４，（Ｐｄ（ＮＨ３）４）２＋，ＰｄＣｌ２－４，ＰｔＣｌ２－６和ＲｈＣｌ３－６可用来修饰ＡｌＯＯＨ溶胶．以Ｐｄ／γＡｌ２Ｏ３催化膜的制备为例，经三次溶胶凝胶过程，可制得无裂缺的厚度为９μｍ的Ｐｄ／γＡｌ２Ｏ３催化膜，膜材料的平均孔直径为６ｎｍ，Ｐｄ被均匀地分布在膜的顶层，其平均粒径为２３ｎｍ．     

催化荧光熄灭法测定天然水中微量铁

1 引言 根据Fe(Ⅱ、Ⅲ)可同时催化过氧化氢氧化二苯胺磺酸钠的反应,发现二苯胺磺酸钠被紫外光照射可发射荧光,而反应产物苯醌则不发荧光,借此可通过测量二苯胺磺酸钠的荧光熄灭,间接地测定天然水中总微量铁。     

6066Al/SiCp复合材料内耗性能研究

用粉末冶金方法制备了6066Al合金和不同SiCp含量的6066Al/SiCp复合材料,用多功能内耗仪在200～600 K温度区间内测试了所研究材料在升温过程中的内耗变化趋势,探讨了6066 Al /SiCp复合材料在不同温度区间的内耗机制.结果表明6066Al/SiCp的内耗值比6066Al合金内耗值高,特别是在高温阶段比6066Al合金内耗值高得多;6066Al/SiCp和6066Al合金在300～470 K时的内耗主要是位错与第二相颗粒交互作用引起的位错内耗,在高温下内耗主要由Al/Al、Al/SiC的界面微滑移引起.