Direct functionalization of the cyclometalated 2-(2′-pyridyl)phenyl ligand bound to iridium(III)

Treatment of [Ir(ppy)₂(μ-Cl)]₂ and [Ir(ppy)₂(dtbpy)][OTf] (ppy = 2-(2′-pyridyl)phenyl; dtbpy = 4,4′-di-tert-butyl-2,2′-bipyridine; OTf = triflate) with pyridinium tribromide in the presence of Fe powder led to isolation of [Ir(4-Br-ppy)(μ-Br)]₂ (1) and [Ir(4-Br-ppy)₂(dtbpy)][OTf] (2), respectively. Pd-catalyzed cross-coupling of 2 with RB(OH)₂ afforded [Ir(4-R-ppy)₂(dtbpy)][OTf] (R = 4′-FC₆H₄ (3)), 4′-PhC₆H₄ (4), 2′-thienyl (5), 4′-C₆H₄CH₂OH (6). Treatment of 4 with B₂(pin)₂ (pin = pinacolate) afforded [Ir{4-(pin)B-ppy}₂(dtbpy)][OTf] (7). The alkynyl complexes [Ir(4-PhCC-ppy)₂(dtbpy)][OTf] (8) and [Ir{4-Me₂(OH)CC-ppy}(4-Br-ppy)(dtbpy)][OTf] (9) were prepared by cross-coupling of 2 with PhCCSnMe₃ and Me₂C(OH)CCH, respectively. Ethynylation of [Ir(fppy)₂(dtbpy)][OTf] (fppy = 5-formyl-2-(2′-pyridyl)phenyl) with Ohira’s reagent MeCOC(N₂)P(O)(OEt)₂ afforded [Ir{5-HCC-ppy}₂(dtbpy)][OTf] (10). The solid-state structures of 2, 5, 7, and 10 have been determined.     

Effects of the structure and morphology of zinc glutarate on the fixation of carbon dioxide into polymer

Zinc glutarates were synthesized from zinc oxides with varying purities via different stirring routes. The particle size and structure of these zinc glutarates were determined by wide‐angle X‐ray diffraction, transmission electron microscopy, and the laser particle size analyzer technique. The results demonstrated that the crystallinity and crystalline perfectness of zinc glutarate are the crucial factors that affect the catalytic activity for the copolymerization of carbon dioxide (CO₂) and propylene oxide (PO). Additionally, the catalyst with a small particle size dramatically increased the yield of the copolymerization between CO₂ and PO. High‐molecular‐weight and regular molecular structure poly(propylene carbonate)s (PPC)s were obtained from CO₂ and PO with the synthesized zinc glutarates. Very high catalytic activity of 160.4 g polymer/g catalyst was afforded. The NMR technique revealed that the PPC copolymer exhibits an exact alternating copolymer structure. The relationships between the crystallinity and the particle size of catalyst with the catalytic activity are correlated and discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3579–3591, 2002     

High-performance liquid affinity chromatography for the purification of immunoglobulin A from human serum using jacalin

A high-performance liquid affinity chromatographic method for the purification of serum immunoglobulin A (IgA) using a jacalin column is described. The automated procedure takes about 2 with minimal manipulation. The yields of the isolated IgA and of its IgG and IgM contamination were studied by enzyme-linked immunosorbent assay (ELISA) of 30 sera. Purity was assured by immunoelectrophoresis. The ratio of IgA1 to total IgA was unchanged after purification, as verified by ELISA. The results showed that greater than 90% IgA could be recovered with less than 0.5% total IgG and greater than 2.0% total IgM remaining in the fractions containing purified IgA.     

Analysis of dinitro- and amino-nitro-toluenesulfonic acids in groundwater by solid-phase extraction and liquid chromatography–mass spectrometry

A reversed-phase LC–MS method with quadrupole-time of flight (QTOF) detection has been developed for the determination of four dinitro-toluenesulfonic acids and two amino-nitro-toluenesulfonic acids in groundwater. The analytes were separated by HPLC with 0.1% (v/v) formic acid as mobile phase modifier compatible with mass spectrometric detection. QTOF-MS analysis with negative ion electrospray ionization afforded good selectivity and sensitivity for analysis of the dinitro- and amino-nitro-toluenesulfonic acids. Structure elucidation and confirmation were accomplished by tandem mass spectrometry. Characteristic ions resulting from the loss of NO, NO₂, and SO₂ from the [M–H]^– ions were detected. An intense fragment ion at m/z 80 representing the [SO₃]^– ion was detected for all dinitro- and amino-nitro-toluenesulfonic acids. Solid-phase extraction using a co-polymer cartridge was developed for preconcentration of the analytes from water. Good recovery (>85%) was achieved when 0.1% formic acid was added into the water samples before extraction. Method detection limits ranged from 10 to 76 ng L^–1 for the targeted compounds when 10 mL water was analyzed. Groundwater samples collected from wells close to a former ammunition plant in Stadtallendorf, Germany, were analyzed for the dinitro- and amino-nitro-toluenesulfonic acids.     

SYNTHESIS OF HYPERBRANCHED CONJUGATIVE POLY（ARYLENEETHYNYLENE）S BY ALKYNE POLYCYCLOTRIMERIZATION

A series of new hyperbranched poly(aryleneethynylene)s are synthesized by the copolycyclotrimerizations oftetraynes(Ⅰand Ⅱ)with aliphatic monoynes(A-C)catalyzed by tantalum-,niobium-,and cobalt-based catalysts.All thereactions proceed smoothly and soluble polymers of high molecular weights(M_w up to 3.8×10~4)are obtained in high yields(up to 97%).     

Adsorption Heat Pump Using an Innovative Coupling Refrigeration Cycle

An adsorption heat pump system using a new binary coupling adsorptive cycle is developed and tested. Experimental results show that the COP of the binary coupling cycle is higher than that of a pure zeolite-water system. The system operating pressure is found to be moderate (close to the ambient pressure) when a proper concentration of ammonia is used in the system. The moderate operating pressure of the new coupling cycle results in low leakage to the system, achieving long life and the light design of the system vessels. The use of the new binary adsorption cycle greatly improves the feasibility and reliability of the adsorption heat pumps, providing essential benefits for the industrialisation of adsorption heat pumps.     

PDMS-based microfluidic device with multi-height structures fabricated by single-step photolithography using printed circuit board as masters

We have developed a method for fabricating microfluidic devices with multi-height structures using single step photolithography. The whole fabrication process is executed by conventional printed circuit board (PCB) technology without the need of having access to clean room facilities. Specifically designed "windows" and "rims" architectures were printed on films that were used as photomasks. Different levels of protruding features on the PCB master were produced by exposing a photomask followed by chemical wet etching. Poly(dimethylsiloxane) (PDMS) was then moulded against the positive relief master to generate microfluidic structures. In this report, we described the fabrication of a microfluidic device featured with a multi-height "sandbag" structure for particle entrapment and peripheral microchannels. Controlled immobilization of biological cells and immunocytochemcial staining assays were performed to demonstrate the applicability of the microfluidic device for cellular analysis. The integrity of the microdevice remained stable under applied pressure, indicating the robustness of the elastic PDMS structures for analytical operation. The simple microfabrication process requires only low-cost materials and minimal specialized equipment and can reproducibly produce mask lines of about 20 microm in width, which is sufficient for most microfluidic applications.     

1-Protected 5-amido 1,2,3-triazoles via ruthenium-catalyzed [3+2] cycloaddition of azides and ynamides

Ynamides react with various azides in the ruthenium-catalyzed Huisgen [3+2] cycloaddition reaction. This ruthenium-catalyzed azide-ynamide cycloaddition reaction yields 1-protected 5-amido 1,2,3-triazoles.     

Comparative studies of the photoinduced reactions in the Mg+-SCNC2H5 and Mg+-NCSC2H5 complexes

The photoinduced reactions of the complexes Mg+-SCNC2H5 and Mg+-NCSC2H5 are studied comparatively in the spectral range of 230-440 nm. One-photon excitation of the complexes through the Mg+ chromophore (3 2P <-- 3 2S) gives rise to the evaporative fragment as well as the molecular activation and charge transfer products. The action spectra of the complexes consist of three broad peaks for Mg+-SCNC2H5 and two for Mg+-NCSC2H5, which accord with the structures obtained from quantum mechanics calculations. These calculations reveal two association isomers for Mg+-SCNC2H5: one is with Mg+ being linked to the S atom and the other to the N atom. The former is more stable than the latter by only 0.23 eV. Both of the isomers have been shown to exist in the complex source employed in our experiments. On the other hand, only one stable structure is found for the complex Mg+-NCSC2H5 characterized by the Mg+-N linkage. In general, the photofragments are dominated by Mg+ at lambda > 400 nm, which decreases with decreasing wavelength accompanied by the increase in other photoproducts. In addition, the branching ratios of Mg+ to other photoproducts are nearly constant in the short wavelength region but decrease with decreasing wavelength. The observed photoreactions have been reasonably explained.     

Evolution of lowest singlet and triplet excited states with transition metals in group 10-12 metallaynes containing biphenyl spacer

A new series of thermally stable group 10 platinum(II) and group 12 mercury(II) poly-yne polymers containing biphenyl spacer trans-[-Pt(PBu₃)₂CC(p-C₆H₄)₂CC-]_n and [HgCC(p-C₆H₄)₂CC-]_n were prepared in good yields by Hagihara’s dehydrohalogenation reaction of the corresponding metal chloride precursors with 4,4′-diethynylbiphenyl HCC(p-C₆H₄)₂CCH at room temperature. We report the optical spectroscopy of these polymetallaynes and compare the results with their bimetallic model complexes trans-[Pt(Ph)(PEt₃)₂CC(p-C₆H₄)₂CCPt(Ph)(PEt₃)₂] and [MeHgCC(p-C₆H₄)₂CCHgMe] as well as the group 11 gold(I) counterpart [(PPh₃)AuCC(p-C₆H₄)₂CCAu(PPh₃)]. The structural properties of all model complexes have been studied by X-ray crystallography. The influence of the heavy metal atom in these metal alkynyl systems on the intersystem crossing rate and the spatial extent of lowest singlet and triplet excitons is systematically characterized. Our investigations indicate that the organic triplet emissions can be harvested by the heavy-atom effect of group 10-12 transition metals (viz., Pt, Au, and Hg) which enables efficient intersystem crossing from the S₁ singlet excited state to the T₁ triplet excited state.