发光液晶材料的合成及发光特性研究

具有聚集诱导发光增强效应的发光液晶材料,能有效地解决一般发光材料聚集时荧光猝灭和液晶自组装之间的矛盾,在液晶显示等领域有极大的应用价值。本文报道了一种自发光液晶材料(2Z,2'Z)-2,2'-(1,4-亚苯基)二(3-(4-己氧基)苯基)丙烯腈(PHPA)。研究了PHPA的聚集态发光性质、溶剂化效应、热力学性质及发光各向异性。结果表明,PHPA同时具有聚集态诱导发光增强效应和液晶性,其有序取向的薄膜发出的光具有各向异性。该发光液晶材料应用于液晶显示将能简化器件结构、增加亮度、对比度和能效。     

A novel biological strategy for morphology control of PbWO4 crystals in tomato extract

PbWO(4) crystals were readily synthesized by reacting lead oxide (PbO(2)) with sodium tungstate (Na(2)WO(4)·2H(2)O) at room temperature in the presence of tomato extract. Biomolecules such as vitamins, proteins in the extract played both the roles of reductant and template. The size and morphology of the PbWO(4) crystals could be controlled by adjusting the concentration of the reactants. When the concentration ratio of PbO(2) and Na(2)WO(4) was increased, the morphologies of the products varied from spherical to fusiform. Room-temperature fluorescence spectra indicated the products had a slight blue shift compared to the solid structure, which may be due to the structure defects in the crystals. The possible mechanism of PbWO(4) crystal growth in tomato extract was discussed.     

氮自由基环化反应的新进展

三十年前,自由基反应在有机合成中的应用已经非常普遍,但其主要集中在碳自由基的应用上,而杂原子自由基却一直得不到发展.氮自由基环化反应是在近十年内才逐步应用到有机合成中的,它对合成一系列的氮杂环化合物有重要的意义,如内酰胺类、吡咯烷类、生物碱类物质等.从四个方面对氮自由基经环化反应合成多种氮杂环化合物的研究进展做一介绍.     

超声搅拌化学浴沉积法制备大颗粒和致密的CdS薄膜

采用超声搅拌化学浴法(UCBD)在SnO2:F透明导电玻璃衬底上制备了CdS薄膜.研究了退火和CdCl2处理对UCBD-CdS薄膜的表面形貌、晶体结构和直接带隙的影响,比较了沉积时间对UCBD-CdS薄膜中CdS聚集体颗粒大小和堆积致密性的影响.结果表明,CdCl2处理可使CdS聚集体中的小颗粒重新熔合在一起,但CdS聚集体的大小并没有改变.在UCBD-CdS薄膜的沉积过程中,CdS薄膜的横向和纵向生长速率之比会随着沉积时间的不同而改变,且沉积时间是获得大颗粒的CdS聚集体和致密的UCBD-CdS薄膜的重要影响因素.当沉积时间为40min时,获得的UCBD-CdS薄膜较致密,CdS聚集体的大小为180nm,膜厚为80.8nm,适合作为薄膜太阳电池的窗口层.     

1H NMR研究溶质浓度对三碳多元醇水溶液氢键作用以及玻璃化的影响

为考察溶质浓度对三碳多元醇水溶液氢键作用以及不同物质玻璃态形成能力的影响,采用¹H NMR外标法研究不同浓度的1-丙醇（NPA）,2-丙醇（IPA）,1,2-丙二醇（PG）,1,3-丙二醇（PD）和丙三醇（glycerol）的水溶液在室温常压下质子化学位移.结果表明:具有CH₃CH（OH）一基团的PG烷基质子的化学位移变化趋势与其他几种醇相比有较大差异.醇羟基质子与水分子的氧形成较强O-H…O氢键.相同摩尔分数下,羟基数的增加导致水质子和羟基质子的化学位移降低,而且羟基位置不同也会导致水质子和羟基质子化学位移差异.这几种三碳多元醇碱性强弱的顺序和降低冰的均相成核温度能力的顺序一致,即glycerol>PG>PD>IPA>NPA,¹H NMR技术表明glycerol和PG更适合用作低温保护剂.     

盐/甲醇体系荧光光谱的分析和指认

研究了CaCl2、LiCl和Ca(NO3)2在甲醇溶液中的荧光光谱,并对溶液中可能的团簇构型采用密度泛函理论和含时(TD)密度泛函理论中的B3LYP方法进行结构优化和激发能计算.实验结果表明CaCl2和LiCl与甲醇形成了具有荧光性质的簇合物,且随着CaCl2和LiCl浓度的增加溶液的荧光强度整体呈增强趋势,而Ca(NO3)2与甲醇相互作用使甲醇发生荧光猝灭.理论计算得到盐/甲醇溶液中可能存在多种簇合物,但能使甲醇溶液荧光增强的团簇构型主要为[CaCl(CH3OH)n]+和LiCl(CH3OH)n,而NO3-与甲醇通过氢键作用形成簇合物的振荡强度几乎为零,解释了NO3-使甲醇发生荧光猝灭的现象.     

弱碱性离子交换树脂D301分离低浓度甲酸的研究

采用D301弱碱性离子交换树脂对水溶液中低浓度甲酸进行分离。静态条件下考察了时间、温度、振荡速率和树脂用量对分离效果的影响,获得了交换等温线;动态条件下考察了不同高径比、流速、温度、浓度下动态穿透曲线;研究了树脂再生效果与稳定性。初始浓度573mg/L的甲酸废水,在树脂用量2.5g/L、温度35℃、振荡速率160r/min条件下,最大交换量为154.16mg/g;其交换等温线符合Langmuir方程,热力学平衡方程计算得G<0,H=10.25kJ/mol,S>0,表明该吸附过程是自发的、吸热、熵增加的过程。交换过程中颗粒扩散是离子交换的主要速率控制步骤,表观活化能与反应级数分别为5.983kJ/mol和0.378。     

基于函数值的线性有理插值样条的区域控制

将插值曲线约束于给定的区域之内是插值与逼近的一个重要内容.本文讨论了一种带形状参数的线性有理插值样条的区域控制问题.给出将插值曲线约束于给定的折线及抛物线之上、之下或之间的条件.数值实例表明本文给出的条件在曲线设计中是有效的.     

基于相依函数型数据非参数回归函数的稳健核估计

本文研究了基于相依函数型数据非参数回归函数的核估计.利用稳健的方法,在一定条件下获得了与i.i.d.场合下类似的估计量的几乎完全收敛速度,推广了现有文献中的相关结论.     

An attribute weight based feedback model for multiple attributive group decision analysis problems with group consensus requirements in evidential reasoning context

In an evidential reasoning context, a group consensus (GC) based approach can model multiple attributive group decision analysis problems with GC requirements. The predefined GC is reached through several rounds of group analysis and discussion (GAD) in the approach. However, the GAD with no guidance may not be the most appropriate way to reach the predefined GC because several rounds of GAD will spend a lot of time of all experts and yet cannot help them to effectively emphasize on the assessments which primarily damage the GC. In this paper, an attribute weight based feedback model is constructed to effectively identify the assessments primarily damaging the GC and accelerate the GC convergence. Considering important attributes with the weights more than or at least equal to the mean of the weights of all attributes, the feedback model constructs identification rules to identify the assessments damaging the GC for the experts to renew. In addition, a suggestion rule is introduced to generate appropriate recommendations for the experts to renew their identified assessments. The identification rules are constructed at three levels including the attribute, alternative and global levels. The feedback model is used to solve an engineering project management software selection problem to demonstrate its detailed implementation process, its validity and applicability, and its advantages compared with the GC based approach.