Effects of substrate and transfer on CVD-grown graphene over sapphire-induced Cu films

We differentiated the effects of Cu films deposited on single crystalline a-,r-,and c-plane sapphire substrates upon graphene films synthesized with atmospheric pressure chemical vapor deposition(CVD).The data illustrate that the realization of high-crystalline Cu film is dependent not only on the crystallinity of underlying substrate,but also on the symmetric match of crystallographic geometry between metal film and substrate.We also systematically investigated the effects of PMMA removal on the Raman ID/IG and IG/I2D values of transferred graphene.The results reveal that different PMMA removal methods do not alter the ID/IG values;instead,the residue of PMMA increases the IG/I2D values and the thermal decomposition of PMMA leads to higher IG/I2D values than the removal of PMMA with acetone.The effects of PMMA removal on variations of the Raman spectra are also discussed.     

Bimetallic amine-bridged bis(phenolate) lanthanide aryloxides and alkoxides: synthesis,characterization, and application in the ring-opening polymerization of rac-lactide and rac-β-butyrolactone

A series of neutral bimetallic lanthanide aryloxides p-C6H4[OLnL(THF)n]2 [Ln = Y(1), Yb(2), Sm(3)(n = 1) and La(4)(n = 2), L = Me2NCH2CH2N{CH2-(2-O–C6H2–tBu2-3,5)}2] and alkoxides p-C6H4CH2[OLnL(THF)]2 [Ln = Y(5), Yb(6)] supported by an amine-bridged bis(phenolate) ligand have been synthesized through one-pot reactions of Ln(C5H5)3(THF), LH2 with p-benzenediol and 1,4-benzenedimethanol, respectively. All complexes have been fully characterized by elemental analyses, single-crystal X-ray diffraction analysis, and IR and multi-nuclear NMR spectroscopy(in the cases of 1, 4 and 5). Study of their catalytic behavior revealed that, in general, all complexes are efficient initiators for the polymerization of rac-lactide(LA) and rac-β-butyrolactone(BBL), except for 3 and 4 in the case of BBL. The influence imposed by lanthanides of different ionic radii and initiating groups of different structures on the activity, controllability, and stereoselectivity of polymerization were systematically studied and compared. Highly heterotactic PLA(Pr up to 0.99) and syndiotactic PHB(Pr ≈ 0.81) with high molecular weight and narrow polydispersity formed and were automatically capped with hydroxyl functionality at both ends.     

高比能锂硫电池正极材料

锂硫电池被认为是最有发展潜力的新型多电子反应的二次电池体系之一.单质硫与锂反应的理论比容量为1675 mA h g?1,质量比能量达2600 W h kg?1,远远高于现行的传统锂离子二次电池材料.同时硫又具有来源丰富、环境友好等优点.然而,仍然有许多问题制约了锂硫电池的发展与广泛应用.本文综述了近年来锂硫电池正极材料的研究进展.     

Carbon‐Coated LiTi2(PO4)3: An Ideal Insertion Host for Lithium‐Ion and Sodium‐Ion Batteries

We report the extraordinary performance of carbon‐coated sodium super ion conductor (NASICON)‐type LiTi₂(PO₄)₃ as an ideal host matrix for reversible insertion of both Li and Na ions. The NASICON‐type compound was prepared by means of a Pechini‐type polymerizable complex method and was subsequently carbon coated. Several characterization techniques such as XRD, thermogravimetric analysis (TGA), field‐emission (FE) SEM, TEM, and Raman analysis were used to study the physicochemical properties. Both guest species underwent a two‐phase insertion mechanism during the charge/discharge process that was clearly evidenced from galvanostatic and cyclic voltammetric studies. Unlike that of Li (≈1.5 moles of Li), Na insertion exhibits better reversibility (≈1.59 moles of Na) while experiencing a slightly higher capacity fade (≈8 % higher than Li) and polarization (780 mV) than Li. However, excellent rate capability profiles were noted for Na insertion relative to its counterpart Li. Overall, the Na insertion properties were found to be superior relative to Li insertion, which makes carbon‐coated NASICON‐type LiTi₂(PO₄)₃ hosts attractive for the development of next‐generation batteries.     

Synthesis and Characterization of Aminoporphyrin‐End‐Functionalized Poly(N‐isopropylacrylamide) with Photodynamic and Thermoresponsive Effects

The novel aminoporphyrin‐end‐functionalized poly(N‐isopropylacrylamide) (PNIPAM) polymer H₂N‐TPP‐PNIPAM (TPP=5,10,15,20‐tetraphenyl‐21H,23H‐porphyrin) behaves as a multifunctional platform that displays a photodynamic effect, thermosensitivity, and fluorescence properties. The polymer was designed by using an asymmetrical aminoporphyrin (i.e., H₂N‐TPP‐Cl) as the initiator for the atom‐transfer radical polymerization of N‐isopropylacrylamide (NIPAM). The polydispersity index (PDI) obtained by gel‐permeation chromatography indicated that the molecular‐weight distribution was narrow (1.09<PDI<1.27). The lower critical solution temperatures of H₂N‐TPP‐PNIPAM showed a decreasing trend as the molecular weight was increased as a result of the incorporation of the porphyrin group at the end of the chain. The fluorescence spectra revealed the luminescent properties of the materials. The results of confocal laser scanning microscopy showed that the polymer could enter the cytoplasm through endocytosis. In addition, the multifunctional platform exhibited low toxicity against normal cells (L929) and cancer cells (Hela) and enhanced photodynamic activity towards HeLa cells, without significant necrocytosis towards L929 cells; as a result this material may be useful in the future for practical photodynamic therapy.     

Fabrication of Predominantly Mn4+‐Doped TiO2 Nanoparticles under Equilibrium Conditions and Their Application as Visible‐Light Photocatalyts

The chemical state of a transition‐metal dopant in TiO₂ can intrinsically determine the performance of the doped material in applications such as photocatalysis and photovoltaics. In this study, manganese‐doped TiO₂ is fabricated by a near‐equilibrium process, in which the TiO₂ precursor powder precipitates from a hydrothermally obtained transparent mother solution. The doping level and subsequent thermal treatment influence the morphology and crystallization of the TiO₂ samples. FTIR spectroscopy and X‐ray photoelectron spectroscopy analyses indicate that the manganese dopant is substitutionally incorporated by replacing Ti⁴⁺ cations. The absorption band edge can be gradually shifted to 1.8 eV by increasing the nominal manganese content to 10 at %. Manganese atoms doped into the titanium lattice are associated with the dominant 4+ valence oxidation state, which introduces two curved, intermediate bands within the band gap and results in a significant enhancement in photoabsorption and the quantity of photogenerated hydroxyl radicals. Additionally, the high photocatalytic performance of manganese‐doped TiO₂ is also attributed to the low oxygen content, owing to the equilibrium fabrication conditions. This work provides an important strategy to control the chemical and defect states of dopants by using an equilibrium fabrication process.     

Efficient Diketopyrrolopyrrole‐Based Small‐Molecule Bulk‐Heterojunction Solar Cells with Different Electron‐Donating End‐Groups

A series of small molecules that contained identical π‐spacers (ethyne), a central diketopyrrolopyrrole (DPP) unit, and different aromatic electron‐donating end‐groups were synthesized and used in organic solar cells (OSCs) to study the effect of electron‐donating groups on the device performance. The three compounds, DPP‐A‐Ph , DPP‐A‐Na , and DPP‐A‐An , possessed intense absorption bands that covered a wide range, from 350 to 750 nm, and relatively low HOMO energy levels, from ?5.50 to ?5.55 eV. DPP‐A‐An , which contained anthracene end‐groups, demonstrated a stronger absorbance and a higher hole mobility than DPP‐A‐Ph , which contained phenyl groups, and DPP‐A‐Na , which contained naphthalene units. The power‐conversion efficiencies (PCEs) of OSCs based on organic:PC₇₁BM blends (1:1, w/w) with a processed DIO additive were 3.93 % for DPP‐A‐An , 3.02 % for DPP‐Na , and 2.26 % for DPP‐A‐Ph . These findings suggest that a DPP core that is functionalized with electron‐donating capping groups constitutes a promising new class of solution‐processable small molecules for OSC applications.     

Scalable synthesis of macroscopic porous carbon sheet anode for potassium-ion capacitor

Carbon materials hold the great promise for application in energy storage devices owing to their low cost, high thermal/chemical stability, and high electrical conductivity. However, it remains challenging to synthesize high-performance carbon electrodes in a simple, scalable and sustainable way. Here, we report a facile method for scalable synthesis of porous carbon anode by using cheap and easily accessible zeolitic imidazolate framework-8 as a template and polyvinylpyrrolidone as an additiona...     

Influence of the alkyl side chain length on the room-temperature phosphorescence of organic copolymers

Pure organic room-temperature phosphorescence(RTP) materials have attracted wide attention owing to their excellent luminescent properties and great potential in various applications. In this work, iminostilbene and its analogues are applied to realize RTP emission by copolymerizing with acrylamide. It can be concluded that the growth of alkane chain in monomers can enhance the lifetime and photoluminescence quantum yield of RTP emission, and polymers with the larger conjugated structure of the ...     

Efficient removal of tetracycline by H2O2 activated with iron-doped biochar: Performance,mechanism, and degradation pathways

In this study,novel iron-doped biochar（Fe-BC） was produced using a simple method,and it was used as an H₂ O₂ activator for tetracycline（TC） degradation.Generally,iron loading can improve the separation performance and reactivity of biochar（BC）.In the Fe-BC/H₂ O₂ system,92% of the TC was removed within 30 min with the apparent rate constant(k_obs) of 0.155 min^-1,which was 23.85 times that in the case of the BC/H₂ O_2<...