Oxygen effects on the interfacial electronic structure of titanyl phthalocyanine film: p-Type doping,band bending and Fermi level alignment

The effect of oxygen doping on titanyl phthalocyanine (TiOPc) film was investigated by ultraviolet photoelectron spectroscopy (UPS). The electronic structure of the interface formed between TiOPc films deposited on highly oriented pyrolytic graphite (HOPG) was clearly different between the films prepared in ultrahigh vacuum (UHV) and under O₂ atmosphere (1.3 × 10⁻² Pa). The film deposited in UHV showed downward band bending characteristic of n-type semiconductor, possibly due to residual impurities working as unintentional n-type dopants. On the other hand, the film deposited under O₂ atmosphere showed upward band bending characteristic of p-type semiconductor. Such trends, including the conversion from n- to p-type, are in excellent correspondence with reported field effect transistor characteristics of TiOPc, and clearly demonstrates that bulk TiOPc film was p-doped with oxygen. In order to examine the Fermi level alignment between TiOPc film and the substrate, the energy of the highest occupied molecular orbital (HOMO) of TiOPc relative to the Fermi level of the conductive substrate was determined for various substrates. The alignment between the Fermi level of conductive substrate and Fermi level of TiOPc film at fixed energy in the bandgap was not observed for the TiOPc film prepared in UHV, possibly because of insufficient charge density in the TiOPc film. This situation was drastically changed when the TiOPc film exposed to O₂, and clear alignment of the Fermi level fixed at 0.6 eV above the HOMO with the Fermi level of the conducting substrate was observed, probably by p-type doping effect of oxygen. These are the first direct and quantitative information about bulk oxygen doping from the viewpoint of the electronic structure. These results suggest that similar band bending with Fermi level alignment may be also achieved for other organic semiconductors under practical device conditions, and also call for caution at the comparison of experimental results obtained under UHV and ambient atmosphere.     

Synthesis of zwitterionic block copolymers via RAFT polymerization

A series of poly [2-(dimethylamino)ethyl methacrylate (DMA)-sodium acrylate (SA)] diblock copolymers were synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization. The polymerization exhibits controlled characters: well-controlled molecular weight, narrow molecular weight distribution, molecular weight increasing with polymerization time. The zwitterionic diblock copolymers show rich solution behaviors. Dynamic light scattering (DLS) indicated the formation of micelles and reverse micelles of copolymers is affected by net charge density of copolymers. Microcalorimetry studies showed that the lower critical solution temperature (LCST) increases with incorporation of hydrophilic segments in buffer.     

Preparation of a novel molecularly imprinted polymer using a water-soluble crosslinking agent

A molecularly imprinted polymer was prepared using a water-soluble crosslinking agent. An ionic complex was utilized as the assembly for the template molecule and the functional monomer, and water as porogenic solvent during preparation of the imprinted polymer. The results of chromatographic evaluations for the prepared polymer suggested that the polymer had much lower hydrophobicity compared with usual octadecyl group bonded silica or the usual molecular imprinted polymer prepared from ethyleneglycol dimethacrylate, and the selective recognition ability for template molecule in the completely aqueous condition.     

Preparation and characterization of self-assembled nanoparticles based on glycol chitosan bearing adriamycin

An anthracycline drug, adriamycin, was chemically conjugated onto the backbone of glycol chitosan via an acid-labile cis-aconityl linkage. The physicochemical characteristics of the glycol chitosan–adriamycin (GC–ADR) conjugates were investigated by dynamic light scattering, atomic force microscopy, and fluorescence spectroscopy. The GC–ADR conjugates were capable of forming nano-sized self-aggregates in an aqueous medium, when the adriamycin content in the conjugate was in the range of 2.0–5.0 wt.%. The self-aggregates were spherical in shape, and had mean diameters of 238–304 nm, depending on the adriamycin content. The critical aggregation concentrations of the conjugates, estimated by the fluorescence quenching method, were as low as 1.0–2.5×10⁻² mg/ml. The size of self-aggregates was not affected by the polymer concentration in the range from 50 to 2,000 μg/ml, and was maintained up to 8 days in phosphate-buffered saline (pH 7.4), indicating high colloidal stability. The release of adriamycin from self-aggregates was significantly dependent on the pH of the medium due to the cis-aconityl linkage; e.g., the amount of adriamycin released for 4 days was 7.3±0.3% at pH 7, whereas it was 29.3±1.9% at pH 4. The cell viability results demonstrated that free adriamycin shows more potent cytotoxicity than the conjugates, primarily attributed to the sustained release of adriamycin from self-aggregates. In conclusion, the self-aggregates, formed by GC–ADR conjugates, might be useful for the site-specific delivery of adriamycin in a sustained manner.     

Kinetic and computational studies on aminolysis of bicyclic carbonates bearing alicyclic structure giving alicyclic hydroxyurethanes

Aminolysis of bicyclic carbonates, which consist of five-membered cyclic carbonate and five- or six-membered alicyclic groups, was examined. Kinetic studies revealed that the aminolysis of the bicyclic carbonate with cyclohexane ring proceeded more smoothly than that of the bicyclic carbonate with cyclopentane ring. Computational calculation suggested that the different reaction rates originate from the distinct ring-strain of the cyclic carbonate groups affected by the conformation of the alicyclic groups.     

Thermal characterization and thermal degradation of poly(norbornene-2,3-dicarboxylic acid dialkyl esters) synthesized by vinyl addition polymerization

The thermal properties and degradation behaviors of poly(norbornene-2,3-dicarboxylic acid dialkyl esters) (PNB-dialkyl esters) (alkyl = Me (PNB-Me), Et (PNB-Et), Pr (PNB-Pr), and Bu (PNB-Bu)) were investigated by thermogravimetric analysis (TGA) in dynamic conditions and by infrared (IR) spectroscopy. The PNB-dialkyl esters show good thermal stability up to 350 °C, and the thermal stability decreases in the order Me > Et > Pr > Bu with the increase in size of side chain. The effect of side-chain size on the thermal degradation behaviors of PNB-dialkyl esters is evidenced by one-step thermal degradation profile for PNB-Me while two-step thermal degradation profile for PNB-Et, PNB-Pr, and PNB-Bu. Transformation is deduced to undergo β-hydrogen elimination and formation of anhydride group in the first stage of thermal degradation reaction according to TGA and IR results for PNB-Et, PNB-Pr, and PNB-Bu. The apparent activation energy and thermal degradation model of PNB-dialkyl esters are estimated by means of Ozawa-Flynn-wall method and Phadnis-Deshpande method, respectively.     

NIR light-induced tumor phototherapy using ICG delivery system based on platelet-membrane-camouflaged hollow bismuth selenide nanoparticles

Near-infrared (NIR) light-triggered photothermal therapy (PTT) is a promising treatment strategy for treating cancer. The combination of nanotechnology and NIR has been widely applied. However, the therapeutic efficacy of the drug-delivery system depends on their ability to avoid phagocytosis of endothelial system, cross the biological barriers, prolong circulation life, localize and rapidly release the therapeutic at target sites. In this work, we designed a platelet membrane (PM)-camouflaged hollow mesoporous bismuth selenide nanoparticles (BS NPs) loading with indocyanine green (ICG) (PM@BS-ICG NPs) to achieve the above advantages. PM-coating has active tumor-targeting ability which could prevent drug leakage and provide drug long circulation, causing drug delivery systems to accumulate in tumor sites effectively. Moreover, as a type of the photothermal sensitizers, BS NPs are used as the inner cores to improve ICG stability and are served as scaffolds to enhance the hardness of this drug delivery system. For one hand, the thermal vibration of BS NPs under NIR laser irradiation causes tumor inhibition through hyperthermia. For another hand, this hyperthermia process could damage PM and let ICG rapid release from PM@BS-ICG NPs. The in vitro and in vivo results showed that this biomimetic nano-drug delivery system exhibits obvious antitumor activity which has good application prospect.     

Electrorheological characterization of polyaniline-coated poly(methyl methacrylate) suspensions

Surface-conductive particles consisting of a poly(methyl methacrylate) (PMMA) core and a polyaniline (PA)-coated shell were synthesized and adopted as suspended particles for electrorheological (ER) fluids. The PA-PMMA composite particles synthesized were monodisperse and spherical in shape. The PA-PMMA suspensions in silicone oil showed typical ER characteristics under an applied electric field. The PA-PMMA composite particles possess a higher dielectric constant and conductivity than the pure PA particle, within an acceptable conductivity range for ER fluids, but the PA-based ER fluid showed larger shear-stress enhancement than the PA-PMMA-based systems. This phenomena can be explained by the interfacial polarizability of PA-based ER fluids, which is the difference between the ER fluid's dielectric constant and loss factor - this polarizability was higher than that of PA-PMMA-based ER fluids, as shown by the dielectric spectrum of each fluid. The insulating PMMA core suppressed the interfacial polarization in ER fluids, resulting in reduced interaction among particles under an imposed electric field.     

SYNTHESIS OF MESOPOROUS POLY(STYRENE-co-MALEIC ANHYDRIDE)/SILICA HYBRID MATERIALS VIA A NONSURFACTANT-TEMPLATED SOL-GEL PROCESS*

Mesoporous poly (styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis wasachieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymerin the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template orpore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder X-ray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m~2/g) andpore volumes (e.g. 0.6 cm~3/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, porevolumes and pore diameters of the hybrid materials increase.     

Oxidation processes in blue water pipe

The thermal, hydrolytic and photochemical oxidation of blue water pipe material has been studied using Fourier Transform infra-red microscopy, differential scanning calorimetry (DSC) and hydroperoxide analysis. The results indicate that oxidation of the pipe occurs predominantly on the outer surface and to a lesser extent on the bore, often with little or no change in the middle layers, FTIR analysis of microtomed sections of the pipe supports the DSC analysis (oxidation induction time at 200°C—OIT) and indicates leaching and consumption of the polymer antioxidants at the outer surface of the pipe. Oxidation profiles at 80°C in water, as measured using carbonyl index, indicate an unusual hydrolytic oxidation and extraction of the carbonylic oxidation products only at the outer pipe surface to a depth of about 0·5 mm resulting in high hydroperoxidation levels. These oxidation analyses are consistent with density profile changes through the pipe wall. Whilst water is concluded to have an important influence in controlling pipe stability, which, in turn, is governed by the temperature and extractability of the polymer antioxidants, ultraviolet light is also seen to have a similar detrimental effect. The influence of these various degradative parameters on the long-term stability of pipe is discussed with a view to elucidating the mechanisms involved.