三维分等级花状Cd0.8Zn0.2S的结构调控及其光催化CO2还原

近年来,光催化CO2还原被视为一种既能解决能源短缺又能减少温室气体,改善人类生存环境的绿色新型技术.然而,由于CO2气体的相对稳定性,构建高催化活性和高选择性的催化体系仍然面临着巨大挑战.锌硫镉固溶体作为一种廉价的固溶类材料,具有吸光范围适宜、化学性质稳定以及能带结构可调控等特点,在光催化还原CO2的方面表现出巨大的潜力.本文发展了一种简单的原位自组装法合成三维分等级花状结构的Cd0.8Zn0.2S,主要包括Cd^2+和Zn^2+离子在含硫氛围下自组装成核状前体,然后以柠檬酸钠作为形貌诱导剂进一步组装生长,同时控制Cd2+/Zn2+摩尔比和反应时间以实现三维分等级花状Cd0.8Zn0.2S的合成.结果表明,三维分等级花状结构的Cd0.8Zn0.2S在光催化还原CO2的过程中表现出优异的催化活性和稳定性.其中,在光照3 h后,CO产量达到41.4μmol g^?1,大约是相同光照条件下Cd0.8Zn0.2S纳米颗粒的三倍(14.7μmol g^?1).此外,三维分等级花状结构的Cd0.8Zn0.2S在光催化过程中展现出对光催化产物CO的较高选择性(89.9%),其中在没有任何牺牲剂或共催化剂作用下的TON为39.6.太赫兹时域光谱(THz-TDS)表明,这种三维分等级花状结构的Cd0.8Zn0.2S相较于Cd0.8Zn0.2S纳米颗粒更有利于对光的吸收,从而提高对光的有效利用率.原位漫反射傅立叶变化红外光谱表征分析揭示了三维分等级花状结构的Cd0.8Zn0.2S在光催化过程中表面吸附物质以及光催化还原中间体的存在及转化.通过实验数据和理论机理预测表明,该种三维分等级花状结构的Cd0.8Zn0.2S具有较高的电流密度和较好的载流子传输能力.基于这种三维的花状结构,使得Cd0.8Zn0.2S具有较大的比表面积和吸附位点,进一步提升体系的CO2吸附性能和光生电子的转移效率,从而有效提高光催化CO2还原的活性.     

Fabrication of type-II InAs/GaSb superlattice long-wavelength infrared focal plane arrays

In this paper, we present an InAs/GaSb type-II superlattice (SL) with the M-structure for the fabrication of a long-wavelength (10 μm range) infrared (LWIR) focal plane arrays (FPA), which are grown by molecular beam epitaxy (MBE). The M-structure is named for the shape of the band alignment while the AlSb layer is inserted into the GaSb layer of InAs/GaSb SL. A 320 × 256 LWIR FPA has been fabricated with low surface leakage and high R₀A product of FPA pixels by using anodic sulfide and SiO₂ physical passivation. Experiment results show that the devices passivated with anodic sulfide obviously have higher R₀A than the un-sulphurized one. The 50% cutoff wavelength of the LWIR FPA is 9.1 μm, and the R₀A is 224 Ω cm² with the average detectivity of 2.3 × 10¹⁰ cm Hz^1/2 W⁻¹.     

Asymmetric hydrogenation reactions with Rh and Ru complexes bearing phosphine–phosphites with an oxymethylene backbone

Phosphine–phosphites 3a and 3b, derived from diphenylhydroxymethyl phosphine have been prepared. From these ligands [Rh(COD)(3a)]BF₄ 5a and RuCl₂(3b)[(S,S)-DPEN] 6b (DPEN = 1,2-diphenylethylenediamine) were synthesized and their structure determined by X-ray diffraction. Ligands 3 are characterized by a small bite angle of 83°. In addition, 5a led to an active catalyst for the hydrogenation of olefins, giving enantioselectivities of up to 96% ee. Likewise, compound 6b showed good activity and enantioselectivity in the hydrogenation of N-1-phenyl ethylidene aniline and a completed reaction at S/C = 500 in 24 h with 83% ee.     

Synthesis of poly(p-dioxanone)-based block copolymers in supercritical carbon dioxide

Poly(p-dioxanone)–poly(ethylene glycol)–poly(p-dioxanone) triblock copolymers (PPDO–PEG–PPDO) were first synthesized by suspension ring-opening polymerization (ROP) of p-dioxanone (PDO) in supercritical carbon dioxide (scCO₂) using different molecular weights (2–10 K) of poly(ethylene glycol) (PEG) as macroinitiators. White and fine flow powders were successfully obtained when the molecular weight of PEG was below 6 K and its feed content below 20 wt.%. The ¹H nuclear magnetic resonance (NMR) result indicated the formation of PPDO–PEG–PPDO block structure even in a confined polymerized environment of particles. All the powderous samples contained irregular shaped particles that were observed by scanning electron microscope (SEM). Except for the copolymer with 10 wt.% PEG10K feed content, the mean particle sizes of other powderous samples showed identical values close to 15 μm. This fact was in agreement with the crystallinity of PPDO in the copolymers measured by differential scanning calorimetry (DSC). The water absorption of these copolymers was also measured, and as compared with PPDO homopolymer, the introduction of PEG increased the water absorption of the copolymers. The green and environmentally friendly method disclosed in this work is attractive to directly synthesize biodegradable polymeric particles with potential biomedical applications.     

The oxygen sensitive properties of (LaBa)Co2O5+δ thin films fabricated by polymer-assisted deposition technique

(LaBa)Co₂O_5+δ (LBCO) thin films were successfully fabricated on Si (001) substrates by polymer-assisted deposition method. Microstructures were examined by X-ray diffraction technique, which confirmed the films were a single phase, pseudo cubic structure. The electrical transport properties of the films were investigated by the temperature dependence of films resistance, which suggested that LBCO films have typical semiconductor properties. After circle tests, the oxygen–hydrogen response rate did not show obvious variation in the specific temperature environment of 580 °C. This demonstrates that the LBCO thin films have a superior stability in both oxygen and hydrogen (6 % H₂, 94 % N₂) environment. Simultaneously, the drastic changes of films resistance (from ~10⁶ to ~10² Ω) with the switch of redox (O₂–H₂) environment within such a short time (~2.2 s) indicated that LBCO films have an excellent oxygen sensitive property and extraordinary fast surface exchange rate.     

Propagation Characteristics of a High-Power Microwave in Waveguide Filled with Plasma

Analytical theory of high-power microwave propagation in waveguide filled with plasma is presented in this paper. The ponderomotive force effect of high power microwave is taken into consideration and preliminary numerical calculations are carried out, the propagation characteristics of the high-power microwave and the influence of microwave power on the distribution of plasma density are calculated and discussed.     

Design of Ka-Band Doubler

This paper describes a Ka-band frequency doubler with balanced structure consisting of Schottky barrier diodes.Input frequency is 1320GHz.Output frequency is 2640GHz and conversion loss 11.2±1.8Db.It can extend microwave signal source to Ka-band.     

Study on spatial dispersion theory of excess conduction loss in normal metals surface below terahertz frequencies

We have developed a rigorous model for analyzing excess conduction loss in normal metals surface by using the spatial dispersion theory. We have used the model to account excess conduction loss and dissect the discrepancies between excess conduction loss measurements and classical theoretical predictions in normal metals surface below terahertz frequencies. Our analysis shows that the conductivity is not only frequency but also wave vector dependent. We demonstrate good quantitative agreement with the published experimental data for the room temperature excess conduction loss of normal metals surface below terahertz frequencies.     

A New Cellular Automata Model Considering Finite Deceleration and Braking Distance

We present a new cellular automata model for one-lane traffic flow. In this model, we consider the driver prejudgment according to the state of the leading car. We also consider that the vehicle deceleration capability is finite and the braking distance of the high-speed running cars cannot be ignored, which is not considered in most models. Furthermore, comfortable driving is considered, too. Using computer simulations we obtain some basic qualitative results and the fundamental diagram of the proposed model. In comparison with the known models, we find that the fundamental diagram of the proposed model is more realistic than that of the known models.     

Fourier transform profilometry based on composite structured light pattern

In Fourier transform profilometry (FTP), the zero frequency of the imaged patterns will influence the measurement range and precision. The π phase shifting technique is usually used to eliminate the zero order component, but this method requires the capture of two fringe patterns with a π phase difference between them, which will impede the real time application of the method. In this paper, a novel method is proposed, in which a composite structured light pattern is projected onto the object. The composite structured light pattern is formed by modulating two separate fringe patterns with a π phase difference along the orthogonal direction of the two distinct carrier frequencies. This method can eliminate the zero frequency by using only one fringe pattern. Experiments show that there is no decrease in the precision of this novel method compared with the traditional π phase shifting technique.