LiCoO2/LiNiO2/LiMn2O4材料安全性能的研究

随着锂离子电池的大型化,对电池安全性能的研究显得更为重要。锂离子电池的安全性有不同的测试方法,如进行过充试验和短路试验。在这些安全性试验中,以及在滥用中出现的安全性的问题,大多是由于电池内部温度升高,进而触发了大量放热的副反应[1],引起电池发生爆炸。本文通过对AA     

Amide Ionic Liquids（AILs）/L-Proline Synergistic Catalyzed Asymmetric Mannich Reactions

IntroductionThe Mannich reaction is one of the most importantreactions for the formation of C—C bonds in the organicsynthetic chemistry, and this reaction has been widelyused for the synthesis of secondary and tertiary aminederivatives that is considered…     

Nonisothermal Kinetics of Sub‐Solidus Phase Transitions in C10Zn,C16Zn and Their Binary System

Nonisothermal kinetics of the solid‐solid phase transition in (n‐C₁₀H₂₁NH₃)₂ZnCl₄(C₁₀Zn), (n‐C₁₆H₃₃NH₃)₂ZnCl₄(C₁₆Zn) and their binary system were determined by Kissinger and Ozawa methods from DSC measurements. The activation energy E_a of the binary system shows a waving dependence on W_C10Zn%, which is caused by not only an intermediate (C₁₀H₂₁NH₃)(n‐C₁₆H₃₃NH₃)ZnCl₄ but also three solid solution ranges (α, β, γ) in the phase diagram of C₁₀Zn‐C₁₆Zn. The variations of the layer d‐spacing are also convenient for the above result.     

相转移催化应用于催化裂化汽油氧化脱硫的研究

随着人们环境保护意识的增强及原油硫含量的增大, 生产满足环境保护要求的清洁燃料是全球炼油工业的发展趋势, 燃料油脱硫显得越来越重要. 在众多的脱硫方法中, 选择性氧化脱硫技术以其工艺条件温和, 脱硫效果明显等特点, 受到了炼油行业的极大关注[1~3], 但脱硫率偏低(30％), 其关键是水相氧化剂与含硫化合物的有效混合. 本文将相转移催化应用于催化裂化(FCC)汽油的氧化脱硫中, 并对脱硫的工艺和机理进行了研究.     

Ni添加对0.4Zr0.1V1.1Mn0.5Cr0.1合金的相结构和电化学性能的影响

本文通过XRD、SEM、EDS研究了Ti_0.4Zr_0.1V_1.1Mn_0.5Cr_0.1Ni_x(x=0，0.2，0.4，0.6，0.8)合金的相结构和电化学性能。该合金系由BCC结构的V基固溶体主相和六方结构的C14 Laves第二相组成，Ni能够促进第二相的生成，Ni含量的增加导致了各相中的化学组成和晶格参数的变化，并通过电化学方法研究了Ni含量对_0.4Zr_0.1V_1.1Mn_0.5Cr_0.1合金电极的最大放电容量、自放电性能、高倍率放电性能、循环稳定性能等的影响。     

Quantitative Analysis of Sulfonamide Residues in Natural Animal Casings by HPLC

A multiresidue method has been developed for the simultaneous determination of sulfadiazine, sulfathiazole, sulfapyridine, sulfamerazine, sulfamethoxydiazine, sulfamethylthiazole, sulfamethazine, sulfamonomethoxine, sulfamethoxypyridazine, sulfisoxazole, sulfamethoxazole, sulfadimethoxine and sulfaquinoxaline in natural animal casings by HPLC after solid-phase extraction. The sulfonamides were extracted with acetonitrile and the extract cleaned up with an Oasis MCX SPE cartridge prior to analysis. Separation was on a ZOBAX Eclipse XDB-C₈ column using gradient elution with acetonitrile/methanol/0.1% acetic acid. The effect of separation conditions on chromatographic behavior and recovery has been studied. Calibration graphs were linear with very good correlation coefficients (r = 0.9983−0.9996) in the concentration range from 0.02 to 1 μg mL⁻¹. The limits of quantitation (LOQ) for the 13 sulfonamides were in the range of 1.5–2.2 μg kg⁻¹. Decision limits (CCα) and detection capabilities (CCβ) were in the range of 105.2–111.0 and 113.0–120.2 μg kg⁻¹, respectively. The recovery for casings spiked with 1.5–100 μg kg⁻¹ ranged from 65.2 to 85.9%. The relative standard deviations (RSDs) of the sulfonamides for six measurements at 100 μg kg⁻¹ were from 2.2 to 7.7%. The applicability of the method to the analysis of salted swine casings, salted sheep casings and dry casing samples was demonstrated.     

Cyclic Voltammograms of Ferrocene on Multi‐Walled Carbon Nanotubes (MWCNTs)‐Modified Edge Plane Pyrolytic Graphite (EPPG) Electrode in Room Temperature Ionic Liquids (RTILs) of 1‐Ethyl‐3‐Methylimidazolium Tetrafluoroborate (EMIBF4)

In this work, the electrochemical behavior of ferrocene (Fc) was investigated by cyclic voltammetry (CV) in room temperature ionic liquids (RTILs) of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) on glass carbon (GC), edge plane pyrolytic graphite (EPPG) and multi‐walled carbon nanotube (MWCNTs)‐modified EPPG electrodes, respectively. The results demonstrated that on GC electrode, pairs of well‐defined reversible peaks were observed, while for the electrode of EPPG, the peak potential separation (ΔE_p) is obviously larger than the theoretical value of 59 mV, hinting that the electrode of EPPG is distinguished from the commonly used electrode, consistent with the previous proposition that EPPG has many “defects”. To obtain an improved electrochemical response, multi‐walled carbon nanotubes (MWCNTs) were modified on the electrode of EPPG; the increased peak current and promoted peak potential separation not only proved the existence of “defects” in MWCNTs, but also supported that “creating active points” on an electrode is the main contribution of MWCNTs. Initiating the electrochemical research of Fc on the MWCNTs‐modified EPPG electrode in RTILs and verifying the presence of “defects” on both EPPG and MWCNTs using cyclic voltammograms (CVs) of Fc obtained in RTILs of EMIBF₄, is the main contribution of this preliminary work.     

Eco-dyeing and functional finishing of wool fabric based on Portulaca oleracea L. as colorant and Musa basjoo as natural mordant

Biomass energy is the most acknowledged renewable resource due to its universality, richness, and renewability. This study utilized a Portulaca oleracea L. plant as a natural colorant for wool fabric dyeing with a high color yield at optimum extraction and dyeing conditions. To evaluate the dyeing mechanism and feasibility of the extracted dyes, we analyzed and characterized the molecular structure and nano-level particle size. The dyeing kinetics and the morphology of dyed fabrics were integratedly explored; the adsorption process of wool fabric on natural colorant molecules was increasingly in line with the pseudo-second-order kinetic adsorption model. Further, the dyeing effects of wool fabrics were compared to that of Musa basjoo mordant and synthetic dyes to confirm the superior color depth (K/S value 23.53), biological function as anti-ultraviolet (UPF value 253.47), and anti-bacterial activity (antibacterial rate of Staphylococcus aureus/Escherichia coli was 71.3%/37%). Our findings provide a feasible scheme for providing deep color and biological activity to wool fabrics. This has broad application prospects in the field of eco-friendly textile materials.     

Furan- and thiophene-functionalised bis-carbene ligands: Synthesis,silver(I) complexes,and catalysis

New furan- and thiophene-functionalised nucleophilic heterocyclic carbene (NHC) complexes of Ag(I) were prepared via the reaction of novel furan- and thiophene-functionalised bis-imidazolium salts with Ag₂O. Samples of both the N-methyl substituted furan- and thiophene-functionalised Ag(I) complexes suitable for single crystal X-ray studies were obtained following anion metathesis to the tetrafluoroborate salts. The structural characterisations revealed dinuclear [Ag₂(_MeCEC)₂](BF₄)₂ (E = O, S) formulations with discrete twenty-membered dimetallacycles present in both instances; however, the overall molecular conformation varies considerably, notably in the orientations of the two bridging furan or thiophene heterocycles to the silver coordination plane. The functionalised bis-imidazolium salts were tested as in situ additives in a Pd(0)-catalysed aryl amination coupling reaction, with the best observed activities around 20% of those seen with 1,3-bis(2,6-di-iso-propylphenyl)imidazolium chloride under identical conditions. The bulkier N-^tBu and N-mesityl substituted salts were found to be more active than the N-methyl substituted analogues.     

离子液体载催化剂和载试剂在有机合成中的应用

综述了离子液体载催化剂和载试剂在有机合成中的应用进展. 离子液体载催化剂是针对离子液体中催化剂难以回收利用的问题提出来的, 它不仅可以实现均相催化, 而且反应产物容易分离, 催化剂可以循环使用. 离子液体载有机试剂合成, 又称为离子液体相有机合成, 具有固相反应产物纯度高和液相反应反应快的优点. 在离子液体载无机试剂的反应中, 反应物毒性降低, 反应条件温和, 产物选择性好.