Preparation of two-dimensional molybdenum disulfide for NO2 detection at room temperature

In this work, the two-dimensional MoS₂ film was prepared by sulfuring the molybdenum atomic layer on SiO₂/Si substrate. The reaction temperature, heating rate, holding time and carrier gas flow rate were investigated comprehensively. The quality of MoS₂ film was characterized by optical microscopy, atomic force microscopy, Raman and photoluminescence spectroscopy. The characterization results showed that the optimum synthesis parameters were heating rate of 25 °C/min, reaction temperature of 750 °C, holding time of 30 min and carrier gas velocity of 100 sccm. The MoS₂ gas sensor was fabricated and its gas sensing performance was tested. The test results indicated that the sensor had a good response to both reducing gas (NH₃) and oxidizing gas (NO₂) at room temperature. The sensitivity to 100 ppm of NO₂ was 31.3%, and the response/recovery times were 4 s and 5 s, respectively. In addition, the limit of detection could be as low as 1 ppm. This work helps us to develop low power and integrable room temperature NO₂ sensors.     

超临界压力CO2在水平圆管内流动传热数值分析

采用SST k-w低雷诺数湍流模型对加热条件下超临界压力CO2在内径di=22.14 mm,加热长度Lh=2440 mm水平圆管内三维稳态流动与传热特性进行了数值计算.通过超临界CO2在水平圆管内的流动传热实验数据验证了数值模型的可靠性和准确性.首先,研究了超临界压力CO2在水平圆管内的流动传热特点,基于超临界CO2在类临界温度Tpc处发生类液-类气“相变”的假设,揭示了水平圆管顶母线和底母线区域不同的流动传热行为.然后,分析了热流密度qw和质量流速G对水平圆管内超临界压力CO2流动换热的影响,通过获取流体域内的物性分布、速度分布和湍流分布等详细信息,重点解释了不同热流密度qw和质量流速G下顶母线内壁温度Tw,i分布产生差异的传热机理,分析结果确定了类气膜厚度d、类气膜性质、轴向速度u和湍动能k是影响顶母线壁温分布差异的主要因素.研究结果可以为超临界压力CO2换热装置的优化设计和安全运行提供理论指导.     

基于复杂网络的能源互联网信息物理融合系统跨空间风险传递研究

能源互联网呈现物理信息深度融合的趋势,为电力系统管理研究定义了新的研究框架。作为一个先进的复杂系统,能源互联网信息物理系统(Energy Internet Cyber-Physical System,ECPS)在其发展过程中面临着一些新的挑战,其中一个就是耦合结构下的风险管理。本文结合复杂网络理论和风险传递理论,着重在拓扑层面分析了ECPS跨空间交互机理,并在此基础上定义了交互路径和交互系数;接着建立了ECPS跨空间风险传递模型,量化描述了风险的传递和演化过程,并进行了风险影响评估;最后,通过仿真实验分析了三种不同交互系数节点故障的风险传递过程和不同攻击模式下系统的崩溃过程。对仿真结果的讨论阐述了能源互联网风险跨空间传递的特点,为更深入地研究ECPS的风险管理提供了参考。     

氢原子束在大气长程传输中的剥离效应

考虑到中性粒子束对近地轨道太空垃圾的清理作用以及在太空探索中的潜在应用前景，研究了中性粒子束在亚轨道空间长程传输过程中影响束流能量和密度损失的主要物理机制，重点分析了剥离效应对束流损耗的影响。中性束剥离效应包括束流粒子之间碰撞导致的自剥离效应和其与大气粒子碰撞导致的剥离效应。以束密度随传播距离变化的方程为基础，通过引用几何因子来表征束流的自剥离效应强度，建立了剥离效应机制下束流的传输模型，由此评估了束流自剥离效应在中性束长程传输中对传输距离的影响关系。研究结果表明，在固定的高度，当中性束密度大于空气粒子密度时，自剥离效应的影响将非常突出，随着传输高度的升高，即使束密度和空气密度同时降低维持量级一致，自剥离效应对传输距离的影响在大几何因子的情况下仍会增强。     

Effect of epitaxial crystallization on packet-like space charge characteristics in low-density polyethylene under multi-field coupling conditions

In order to study the effect of epitaxial crystallization on charge transport in low-density polyethylene (LDPE) under multi-field coupling conditions, three typical epitaxial crystallizations, namely disorder (glass substrate), crossover (isotactic polypropylene substrate), and parallel (polytetrafluoroethylene substrate), were prepared and denoted as LD-G, LD-iPP, and LD-PT, respectively. Packet-like space charge through samples was analyzed by the pulsed electro-acoustic (PEA) method. It is shown that different microscopic surface morphologies appeared in the LDPE samples with different epitaxial crystallizations, which, however, do not change the crystalline structure of the bulk. Packet-like space charge phenomena were observed and the distortion field increased with the temperature which could be attributed to the larger amount of charge injection in a shorter period. The differences of the amount and injection rate of the space charge were explained and verified considering the typical chain alignment of epitaxial crystallization, which, in our opinions, contributes to the pass over of positive charge in LD-iPP samples.     

Aging properties of styrene-butadiene rubber nanocomposites filled with carbon black and rectorite

To better understand the effect of rectorite and carbon black (CB) on the aging performance of styrene-butadiene rubber (SBR), SBR/CB, SBR/CB/rectorite and SBR/rectorite nanocomposites with the same total filler loading were prepared. The microstructure of the three SBR nanocomposites was characterized by XRD, TEM and SEM. After thermal aging, oxygen-containing molecules were found to be formed in the SBR nanocomposites, as verified by FTIR analysis. The SBR/rectorite nanocomposite showed the highest aging coefficient and the lowest change rate of tensile strength and stress at 100% strain among the three SBR nanocomposites, indicating that the introduction of nano-dispersed rectorite layers can enhance the thermal aging resistance of the nanocomposites. For the SBR/CB/rectorite nanocomposite, the addition of CB helped to improve the interfacial compatibility between the filler and matrix, resulting in the best crack resistance as the aged SBR/CB/rectorite nanocomposite always demonstrated the least cracks on the surface during either stretching or bending experiments.     

Further results on stabilization of neural-network-based systems using sampled-data control

Nonlinear Dynamics - This paper investigates the problem of stabilization for sampled-data neural-network-based systems under variable sampling. A novel Lyapunov–Krasovskii functional (LKF)...     

α-Ti(HPO4)2微球负载型催化剂的合成及其烯烃聚合催化性能

2种茂金属催化剂及1种后过渡金属催化剂分别被固载于经过甲基铝氧烷处理后的α-Ti（HPO₄）₂微球表面,制备得到3种微球负载型催化剂。在烯烃聚合反应过程中,3种负载型催化剂均表现出比硅胶负载型催化剂更高的催化活性。2种茂金属负载型催化剂在乙烯、丙烯聚合反应中的活性分别高达6.8×10⁷ g_PE·（mol_Zr·h）^-1和5.0×10⁷ g_PP·（mol_Zr·h）^-1,所产生的烯烃聚合产物分子量分布较窄（M_w/M_n<2.3）,表现出良好的单中心催化特性,而且丙烯聚合产物的等规度高达96.5%。负载型后过渡金属催化剂在乙烯聚合反应中的活性稍低,但也能够达到8.3×10⁶ g_PE·（mol_Fe·h）^-1。3种负载型催化剂催化烯烃聚合产物均成微球型,能够很好地复制载体的形貌。     

Migration study of iodine in Beishan granite by a column method

The fate and migration behavior of radionuclides in environment are influenced by a series of physical and chemical processes such as advection, hydrodynamic dispersion (including mechanical dispersion and molecular diffusion), retention, chemical reaction and so on. In this study, the migration of ¹²⁵I^? in Beishan granite and the potential retention of iodine by silver halide additives were investigated by a pulse injection column method. All breakthrough curves were analyzed according to the analytical solution of transport equation and the dispersion coefficient (D), and first-order sorption constant (k) were obtained. For conservative nuclide, the dispersion behavior is only related to the dispersion medium. Silver halides were proved having sorption ability for ¹²⁵I^? in the order of AgCl > AgBr > AgI. The transport of iodine in the crushed granite column can be adequately described by the advection–dispersion equation with a first-order, irreversible sorption term. The pulse injection column method can be used as a fast method to evaluate the sorption or retention ability of solid phase.