圆宝山隧道炭质板岩大变形段初期支护结构受力特性研究

为了准确掌握丽香铁路圆宝山隧道炭质板岩大变形段初期支护结构受力特性,结合深埋炭质板岩隧道大变形特点,通过调查分析发现炭质板岩具有显著的各向异性特征,在地下水、高地应力及施工扰动等复杂因素作用下表现出显著的蠕变特性,从而导致隧道发生大变形。同时,对圆宝山隧道展开围岩变形及初期支护受力监测,监测结果表明,薄层炭质板岩段围岩的变形速率、变形量整体上较中厚层炭质板岩段围岩大,且达到稳定所需的时间更长;围岩压力与钢拱架应力基本呈从拱顶到拱脚减小的趋势,且围岩压力最大值出现在拱肩,而钢拱架应力最大值分布位置不固定,常见分布位置为两侧拱墙上下,这与钢拱架因发生扭曲而设置横支撑基本吻合;变更支护参数后,围岩的时效特性有明显改善,尤以薄层炭质板岩段围岩最为明显,同时围岩压力分布更加均匀,钢拱架出现拉应力现象不再集中。基于上述研究成果,选择I18型工字钢焊制钢架、设置间距为0.6m、喷射厚为27cm的C25混凝土作为初期支护,同时采用"弱爆破、短进尺"的掘进方式,以达到控制深埋炭质板岩隧道围岩变形的目的。     

两跨输电线非线性主共振响应分析

研究两跨输电线非线性共振响应问题,应用Hamilton变分原理推导了两跨输电线的振动微分方程以及对应的边界条件。利用Galerkin离散方法和多尺度法,得到了单模态主共振响应。研究结果表明:幅频响应曲线表现出软、硬弹簧性质,随着外激励幅值的增大,输电线系统响应由软弹簧性质向硬弹簧性质转换;系统阻尼减小或外激励幅值增大时,系统幅值个数也随之发生变化,表现出多值和跳跃现象。     

配体对钯纳米催化剂的形成及其电活性的影响

分别在EDTA,甘氨酸(Gly)和木质素磺酸钠(Ls)存在下,以硼氢化钠为还原剂,将Pd²⁺还原为Pd纳米颗粒并负载在多壁碳纳米管(MWCNT)表面。采用扫描电镜(SEM),透射电镜(TEM)和X射线衍射(XRD)对纳米Pd催化剂的形貌和微结构进行了表征。结果表明:EDTA存在时,所形成的Pd纳米颗粒(Pd-EDTA/MWCNT)的粒径更小,在MWCNT上的分散度更高。采用循环伏安(CV)和计时伏安技术(CA),研究了催化剂在碱性环境中对乙醇的电催化活性。在碱性溶液中对乙醇氧化的电化学研究表明:在Pd-EDTA/MWCNT催化剂上,乙醇氧化反应的起始电位较低,电流密度最大,电子传递阻力较小,反应速率较大,并且对乙醇氧化的电催化活性保持稳定。     

新型2-(芳氨基乙基氨基)苯甲醇的合成及其杀菌活性

2-氨基苯甲醇及其衍生物是一类很重要的具有双官能团的化合物,在有机化学和药物合成中具有广泛的用途。本文主要提供了一种简单、有效合成2-(芳氨基乙基氨基)苯甲醇类化合物的方法,同时测定了目标化合物的杀菌活性。溴乙酰芳胺与2-氨基苯甲醇经N-烷基化反应生成2-[(2-羟甲基苯基)氨基]乙酰芳胺类化合物3,然后经LiAlH4还原生成了一系列结构新颖的2-(芳氨基乙基氨基)苯甲醇类化合物5a~5i,产率为76%~95%。用IR、~1H NMR、~(13)C NMR和元素分析等对产物结构进行了表征。目标化合物的杀菌活性结果表明,在测试浓度下,大部分显示中等至良好的活性,化合物5e对辣椒疫霉病菌的抑制活性达73.0%。     

1,3,5,7-四甲基氟硼二吡咯甲川的合成、晶体结构及密度泛函理论研究

以2,4-二甲基吡咯、原甲酸三乙酯以及对甲苯磺酸为原料,无溶剂下合成了1,3,5,7-四甲基对甲苯磺酸二吡咯甲川(T1);以T1、三氟化硼乙醚以及三乙胺为原料,无溶剂下合成了1,3,5,7-四甲基氟硼二吡咯甲川(F1)。利用1H NMR和X射线单晶衍射对其进行了表征。结果表明:T1属于单斜晶系,P21/c空间群,晶胞参数为a=0.777 3(3)nm,b=1.518 5(5)nm,c=1.612 2(5)nm,β=91.923(12)°,V=1.901 9(11)nm3,Z=4;F1属于单斜晶系,P21/n空间群,晶胞参数为a=0.775 02(1)nm,b=1.444 20(3)nm,c=1.174 35(2)nm,β=107.779 5(9)°,V=1.251 65(4)nm~3,Z=4。在4种不同溶剂中,测定了T1的紫外可见光谱、F1的紫外可见光谱和稳态荧光光谱。将密度泛函计算与前线轨道理论相结合,研究了T1和F1可能的衍生方式。     

Improved operator comfort and off-road capability through pendulum arm technology

The Nordic forest industry requires just-in-time wood deliveries. Operations must continue regardless of season, weather and terrain. Soil compaction and deep ruts must be avoided while providing high performance and a reasonable working environment for operators.The Xt28 pendulum arm forwarder is a full-size concept forwarder with six hydrostatic propelled wheels on pendulum arms built on a three-piece frame connected with two articulation joints. The Xt28 concept machine was tested according to Skogforsk standard machine tests. Rut depth test focused on soil interaction where rut depth was measured related to number of passes. Machine dynamics were measured using standardized test track with focus on operator comfort.The project proved the potential of pendulum arm technology in off-road transportation. Automatic pendulum arm levelling, equalized ground pressure between wheels and improved operator comfort through reducing adverse vibrations and roll angles, simultaneously reducing dynamic forces transferred to the forest floor. Pendulum arm technology improves travel speed in adverse terrain, providing unparalleled side slope capability and enhanced productivity.     

Thermal decomposition of lutetium propionate

The thermal decomposition of lutetium(III) propionate monohydrate (Lu(C₂H₅CO₂)₃·H₂O) in argon was studied by means of thermogravimetry, differential thermal analysis, IR-spectroscopy and X-ray diffraction. Dehydration takes place around 90 °C. It is followed by the decomposition of the anhydrous propionate to Lu₂O₂CO₃ with evolution of CO₂ and 3-pentanone (C₂H₅COC₂H₅) between 300 °C and 400 °C. The further decomposition of Lu₂O₂CO₃ to Lu₂O₃ is characterized by an intermediate constant mass plateau corresponding to a Lu₂O_2.5(CO₃)_0.5 overall composition and extending from approximately 550 °C to 720 °C. Full conversion to Lu₂O₃ is achieved at about 1000 °C. Whereas the temperatures and solid reaction products of the first two decomposition steps are similar to those previously reported for the thermal decomposition of lanthanum(III) propionate monohydrate, the final decomposition of the oxycarbonate to the rare-earth oxide proceeds in a different way, which is here reminiscent of the thermal decomposition path of Lu(C₃H₅O₂)·2CO(NH₂)₂·2H₂O.     

基于金纳米棒-辣根过氧化物酶协同效应的过氧化苯甲酰生物传感器

将金纳米棒(AuNRs)和辣根过氧化物酶(HRP)以自组装的方式依次修饰到Au电极表面,构建了响应过氧化苯甲酰(BPO)生物传感器。采用循环伏安法和电流时间法研究了传感器的电化学性质和最佳工作条件;由于HRP/AuNRs复合膜的协同效应,电极性能得到显著改善。在最佳工作条件下(工作电压-0.02V,pH 7的磷酸盐缓冲体系),BPO浓度在5.0×10-6～1.0×10-4 mol/L范围内与电极的电流响应值呈良好的线性关系,线性回归方程为:i(μA)=12.6796C(mmol/L)+0.2406,R=0.9993。电极的检出限为8.5×10-7 mol/L。电极用于面粉中BPO的测定,平行测定6次,平均回收率为97.9%～100.1%,相对标准偏差(RSD)为0.5%～2.1%。本方法用于商品面粉中的BPO测定,取得满意结果。