拟静态法测定混合溶剂的汽化热和汽化熵

讨论了沸点升高法测定混和溶剂化热和汽化熵的原理，并用拟静态法测定了乙醇－丙酮，并－四氯化碳和苯，甲苯三组混和溶剂在不同组成下的正常沸点，根据沸点数据求得了混和泶微分汽化热和汽化熵，实验结果表明，二元混和溶剂与理想溶液偏离不大时，其正常汽化熵符合Ｔｒｏｕｔｏｎ规则。     

介孔分子筛的制备与苯加氢反应的催化性能

1992年美国Mobil公司的研究人员首次报道合成出具有规则孔结构的M41S系列介孔分子筛材料.由于介孔材料独特的性质,引起了人们极大的兴趣,在其合成与性能等方面进行了大量的研究,合成出了多种系列不同性能的介孔分子筛,并研究了介孔分子筛作为催化剂或催化剂载体在各类催化反应中的催化性能.     

Enhanced visible light photocatalytic activity of CeO2@Zn0.5Cd0.5S by facile Ce(IV)/Ce(III) cycle

In this study, CeO₂@Zn_0.5Cd_0.5S heterostructure (Ce@ZCS) is synthesized via a simple two-step hydrothermal method. The effect of CeO₂ loading on the visible-light photoactivity of Zn_0.5Cd_0.5S is mainly investigated. It is found that Ce@ZCS shows a 1.9 times activity as high as ZCS for the MB degradation. The improved activity mainly results from the significant enhanced charge separation by CeO₂, in which the electron transfer is obviously promoted by the facile Ce(IV)/Ce(III) cycle. The excited electrons of ZCS is easy to transfer to CeO₂, thus obviously increasing the charge separation of ZCS. The accepted electrons by CeO₂ may easily be captured by the adsorbed O₂ to form O₂⁻, and then O₂⁻ could combine with H⁺/H₂O to form HO₂, and OH. Finally, O₂⁻, h⁺ and OH are confirmed as the major oxidative species in photocatalytic reaction for Ce@ZCS, and a possible photocatalytic mechanism is proposed. The cheap, efficient Ce@ZCS photocatalyst could be applied for practical waste water treatment.     

Chiral NMR discrimination of pyrrolidines using (18-crown-6)-2,3,11,12-tetracarboxylic acid

The compound (18-crown-6)-2,3,11,12-tetracarboxylic acid is shown to be an effective chiral NMR solvating agent for determining the enantiomeric excess of chiral pyrrolidines. Enantiomeric discrimination is observed in both the ¹H and ¹³C NMR spectra. The neutral amine is mixed with the crown ether in an NMR tube and a neutralization reaction between the two produces the corresponding ammonium and carboxylate ions. An association of these ions accounts for the chiral recognition. Pyrrolidines with one or two substituent groups α to the nitrogen atom are not inhibited from binding to the crown ether. Chiral discrimination was observed in the NMR spectra of pyrrolidines that have a stereogenic center α or β to the nitrogen atom. Dibasic substrates are likely converted to their diprotonated form in the presence of the crown ether, and both ammonium sites appear to associate with the crown ether moiety.     

Studies on the Performance and Structure of Supported Catalysts for the Partial Oxidation of Methane to Syngas

The catalytic properties of several supported metal catalysts on different carriers were studied in the partial oxidation of methane (POM) to syngas. In our experiment, supported noble metal catalysts exhibited better performance than the other supported transition metal catalysts. The catalyst performances were significantly influenced by the d-electron configuration of the active metal components and the dispersion of active metal components on the support. A catalyst with a moderate number of unpaired electrons in the d-orbital of the active metal support without obvious acidity or redox activity (e.g. MgO) was suitable for POM performance. The Rh/SiO2 catalyst was the best in the POM reaction, among those investigated. Reaction conditions apparently also affected the POM performance of the catalyst. The conversion of methane and the selectivity for CO increased with the reaction temperature, and a high CH4/O2 ratio was not beneficial for POM performance.     

红紫素-18酰亚胺衍生物的合成

以脱镁叶绿酸甲酯为原料, 通过对其3-位乙烯基的氧化, 得到3-(2,2-二甲氧基乙基)-3-去乙烯基脱镁叶绿酸甲酯, 经过甲酸处理得到3-(2-氧代乙基)-3-去乙烯基脱镁叶绿酸甲酯, 选择适当的条件, 通过Grignard 反应合成了对应的3-(2-羟基烷基)-3-去乙烯基脱镁叶绿酸甲酯. 实验结果表明: 3-(2-氧代乙基)-3-去乙烯基脱美叶绿酸甲酯和Grignard试剂的反应, 只要反应条件控制得当, 13²-位的甲氧甲酰基不会脱去. 结合E环的改造, 将其转变成酸酐环进而转变成N-取代的酰亚胺环. 目标化合物的合成也可以将3-(2,2-二甲氧基乙基)-去乙烯基脱镁叶绿酸甲酯转变成N-取代的酰亚胺后, 再和Grignard试剂反应, 完成目标化合物的合成. 合成的一系列化合物具有长波长的紫外吸收. 化合物的结构变化对紫外吸收的影响作了相应的讨论. 合成的新化合物均由核磁共振、红外光谱、元素分析予以证实.     

Fabrication and electrochemical performance of nickel ferrite nanoparticles as anode material in lithium ion batteries

Nano-sized nickel ferrite (NiFe₂O₄) was prepared by hydrothermal method at low temperature. The crystalline phase, morphology and specific surface area (BET) of the resultant samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and nitrogen physical adsorption, respectively. The particle sizes of the resulting NiFe₂O₄ samples were in the range of 5–15 nm. The electrochemical performance of NiFe₂O₄ nanoparticles as the anodic material in lithium ion batteries was tested. It was found that the first discharge capacity of the anode made from NiFe₂O₄ nanoparticles could reach a very high value of 1314 mAh g⁻¹, while the discharge capacity decreased to 790.8 mAh g⁻¹ and 709.0 mAh g⁻¹ at a current density of 0.2 mA cm⁻² after 2 and 3 cycles, respectively. The BET surface area is up to 111.4 m² g⁻¹. The reaction mechanism between lithium and nickel ferrite was also discussed based on the results of cycle voltammetry (CV) experiments.     

Hexacyanoferrate‐based ionic liquids as Fenton‐like catalysts for deep oxidative desulfurization of fuels

Two hexacyanoferrate‐based ionic liquids, [C₄Py]₃Fe(CN)₆ and [C₁₆Py]₃Fe(CN)₆, were synthesized and characterized using Fourier transform infrared and mass spectroscopies and CHN analysis. They were employed as Fenton‐like catalysts in extraction and catalytic oxidative desulfurization of model oil with dibenzothiophene (DBT), benzothiophene (BT), 4,6‐dimethyldibenzothiophene (4,6‐DMDBT), 4‐methyldibenzothiophene (4‐MDBT) and 3‐methylbenzothiophene (3‐MBT) as substrates. Various polar solvents, such as ionic liquids, water and organic solvents, were applied to choose a suitable extractant. The results showed the removal of DBT reached 97.1% with [C₄Py]₃Fe(CN)₆ as a catalyst and 1‐n‐octyl‐3‐methylimidazolium hexafluorophosphate ([C₈mim]PF₆) as an extractant under optimal conditions. The activity of sulfur removal followed the order DBT > 3‐MBT > BT > 4‐MDBT >4,6‐DMDBT. The effect of water content on sulfur removal was investigated by adding various concentrations of H₂O₂. It was found that excess water had a positive effect on sulfur removal but the catalysts were less sensitive than [FeCl₄^?]‐based catalysts to water. The mechanism was studied using electron spin‐resonance spectroscopy and gas chromatography–mass spectrometry. O₂^?? may be the active oxygen species in the catalytic oxidative desulfurization process and the oxidation products of various sulfur compounds were the corresponding sulfoxides and sulfones. Copyright © 2016 John Wiley & Sons, Ltd.     

一个1+1维Boussinesq系统的Darboux变换及其应用

主要考虑1+1维Boussinesq系统的一个Darboux变换,反复利用该Darboux变换,可以从该系统的一个已知解出发,通过代数运算和求导运算得到系统的新解.     

Polysaccharide-based hemostats: recent developments,challenges, and future perspectives

Cellulose - Excessive hemorrhage is a leading cause of death to trauma patients, especially in combat and civilian accidents. The main priority in the medical treatment of trauma patients is to...