可降解自固化类骨磷灰石支架的研究

0引言一直以来,钙磷生物材料如羟基磷灰石(hy-droxyapatite,HA)由于其成份与骨的无机成份相似,具有良好的生物相容性,作为骨修复材料引起了人们广泛的兴趣。磷酸钙骨水泥是一类可在生理条件下自固化的非陶瓷型类HA人工骨材料,这种由磷酸钙骨水泥(calcium phosphate cement,CPC)转变而成的HA,与天然骨磷灰石有类似的组成结构,植入人体后可参与新陈代谢,促进骨组织生长[1,2]。一些研究显示,CPC具有成骨活性和生物降解性,在体内被吸收的同时可引导新骨的生成,从而可克服自体骨、磷酸三钙陶瓷因吸收降解过快造成的局部缺陷以及陶瓷型HA长…     

Structure and properties of compatibilized recycled poly(ethylene terephthalate)/linear low density polyethylene blends

Blends of recycled poly(ethylene terephthalate) (R-PET) and linear low density polyethylene (LLDPE) were compatibilized with poly(styrene-ethylene/butyldiene-styrene) (SEBS) and maleic anhydride-grafted poly(styrene-ethylene/butyldiene-styrene) (SEBS-g-MA). Effects of compatilizer were evaluated systematically by study of mechanical, thermal and morphology properties together with crystallization behavior of PET. Tensile properties of the blends were improved effectively by the addition of 10 wt% SEBS-g-MA, elongation at break and charpy impact strength were increased with the increasing content of compatilizer. SEBS-g-MA is more effectual on mechanical properties of R-PET/LLDPE blends than SEBS. DSC analysis illustrates crystallinities of PET and LLDPE were increased by compatilizer at annealing condition. WAXD and FT-IR spectra show that annealing influences crystallization behavior of PET. Different compatilizer content results in different morphology structure, in particular, higher SEBS-g-MA content can induce the formation of a salami microstructure.     

负载贵金属光催化剂的光催化活性研究

在注入V离子的二氧化钛光催化剂上负载贵金属,制备了在可见光照射下具有高光催化活性的功能型光催化剂,研究在可见光和太阳光照射下丙炔的光催化水解反应，利用这些改性的二氧化钛构筑太阳能到化学能的转换系统.研究结果发现了V/Pt光催化剂在丙炔和水的光催化水解反应中，由于贵金属的存在，有利于促进发生加氢反应；导致丙烯的生成量增加.在可见光下的光催化活性也和负载贵金属所处的氧化状态有着密切的关系，贵金属完全被还原到0价是提高光催化活性的必要条件.     

Effect of reduction temperature on a spray-dried iron-based catalyst for slurry Fischer–Tropsch synthesis

An industrial iron-based catalyst (100Fe/5Cu/6K/16SiO₂, by weight) was characterized after reduction at different temperatures and after Fischer–Tropsch synthesis (FTS) in a stirred tank slurry reactor (STSR). The BET surface area and pore volume of the catalyst decreases with increasing reduction temperature, and the contrary trend was found for pore size. The iron phase compositions of catalysts reduced with syngas were strongly dependent on pretreatment conditions employed. Pretreatment with syngas at lower temperature prevents iron catalyst activation. Carburization was intensified with the increase in reduction temperature. The formation of iron carbides in reduced catalyst was necessary for obtaining stable high FTS activity. The relationship between the amount of CO₂ in tail gas during activation and the Fe³⁺ (spm) content in the reduced catalyst was observed. The rapid carburization at high reduction temperature resulted in the formation of a superparamagnetic Fe³⁺ core and an iron carbide layer of the reduced catalyst. FTS activity decreased with the increase in the reduction temperature, but the stability distinctly improved. It was found that the working catalyst loss in the heavier waxy products resulted in higher deactivation rate of the catalyst reduced at lower temperature. With the increase in the reduction temperature, the product distribution shifted towards the lower molecular weight products.     

Development of aryl-containing dipyrrolyldiketone difluoroboron complexes (BONEPYs): Tune the hydrogen bond o–CH···F for fluoride recognition

Dipyrrolyldiketone difluoroboron complexes (BONEPYs) were synthesized by condensation of the corresponding pyrroles and malonyl chloride followed by treatment with BF₃·OEt₂. The aryl-substituted pyrrole is introduced to form a cyclic system in order to investigate anion binding studies. In BONEPYs 1–3 the o-H of the aryl group forms hydrogen bonding with F⁻ to give a more table complex. In contrast, the intramolecular hydrogen-bonded BONEPY endo-4 is more stable than its exo isomer. While adding F⁻, the hydrogen bonds must be broken first to give 4·(3)F⁻. Owing to the electron-rich group (-OMe), the o-H of the phenyl group can hardly interact with F⁻ via hydrogen bonding to give the less stable complex 4·(5)F⁻. The energy differences between the different conformations were calculated using DFT methods, which is consistent to the experimental observations.     

Highly Efficient One-Pot Synthesis of 2-Arylmethyl N-Substituted Anilines via Yb（OTf）3 Catalyzed Three-Component Reaction

An efficient method has been developed for one-pot three-component coupling reactions of various aldehydes, 1-cyclohexen-2-one, and primary or secondary amines in the presence of a catalytic amount of Yb（OTf）3 under mild conditions to afford the corresponding 2-arylmethyl N-substituted anilines in good yields. In addition, the catalyst was easily recovered and could be reused for at least four cycles without any loss of activity.     

Asymmetric Negishi reaction for sterically hindered couplings: synthesis of chiral binaphthalenes

A new synthetic approach affording, for the first time chiral binaphthalene derivatives via an asymmetric Negishi reaction, in good yields (55–95%) and good enantioselectivities (49–85% ee), is reported.     

纳米色料的制备及应用

纳米色料是一类可以结合颜料和染料两者优点的新型色料，除了在传统的着色领域具有独特优势外，在光电高新技术领域也具有广阔的应用前景。本文综述了国内外有机纳米色料在制备和应用上的最新研究进展，归纳出几种有代表性的制备有机纳米色料以及有机色料/无机物杂合纳米色料的最新研究方法。着重论述了细乳液聚合法制备纳米色料，对各种制备方法作出比较评价，并结合研究现状对纳米色料在光电领域的应用提出了一些设想。     

Synthesis and Crystal Structure of 4,4＂-Diamino-N,N＇-diethyl Bisbenzenesulfamide

A new compound of 4,4'-diamino-N,N'-diethyl bisbenzenesulfamide (C18H26N4O4S2,Fw = 426.55) has been synthesized and its structure was determined by X-ray crystallography method. The crystal belongs to the monoclinic system, space group P21/c with a = 10.0623(9), b =13.6759(13), c =15.5309(14) (A),β = 100.482(2)°, V= 2101.6(3)(A)3, Dc = 1.348 g/cm3, F(000) = 904,μ = 0.285 mm-1, Z = 4, the final R = 0.0512 and wR = 0.1363 for 3485 observed reflections with I ＞2σ(Ⅰ). The structure of the title compound is pseudo secondary axisymmetric, and the two sulfamide-groups show distorted tetrahedral configurations.     

3-Aminooxetanes: versatile 1,3-amphoteric molecules for intermolecular annulation reactions

Despite the versatility of amphoteric molecules, stable and easily accessible ones are still limitedly known. As a result, the discovery of new amphoteric reactivity remains highly desirable. Herein we introduce 3-aminooxetanes as a new family of stable and readily available 1,3-amphoteric molecules and systematically demonstrated their amphoteric reactivity toward polarized π-systems in a diverse range of intermolecular [3 + 2] annulations. These reactions not only enrich the reactivity of oxetanes, but also provide convergent access to valuable heterocycles.

Despite the versatility of amphoteric molecules, stable and easily accessible ones are still limitedly known.

Amphoteric molecules, which bear both nucleophilic and electrophilic sites with orthogonal reactivity, represent an attractive platform for the development of chemoselective transformations.¹ For example, isocyanides are well-established 1,1-amphoteric molecules, with the terminal carbon being both nucleophilic and electrophilic, and this feature has enabled their exceptional reactivity in numerous multi-component reactions.² In the past few decades, substantial effort has been devoted to the search for new amphoteric molecules.^1–5 Among them, 1,3-amphoteric molecules proved to be versatile. The Yudin and Beauchemin laboratories have independently developed two types of such molecules, α-aziridine aldehydes and amino isocyanates, respectively.^4,5 With an electrophilic carbon and a nucleophilic nitrogen in relative 1,3-positions, these molecules are particularly useful for the chemoselective synthesis of heterocycles with high bond-forming efficiency without protective groups (Fig. 1). However, such elegant amphoteric systems still remain scarce. Therefore, the development of new stable amphoteric molecules with easy access remains highly desirable.Open in a separate windowFig. 1Representative [1,3]-amphoteric molecules versus 3-aminooxetanes.In this context, herein we introduce 3-aminooxetanes as a new type of 1,3-amphoteric molecules and systematically demonstrate their reactivity in a range of [3 + 2] annulations, providing rapid access to diverse heterocycles. Notably, 3-aminooxetanes are bench-stable and either commercially available or easily accessible. However, their amphoteric reactivity has not been appreciated previously.Oxetane is a useful functional group in both drug discovery and organic synthesis.^6–9 Owing to the ring strain, it is prone to nucleophilic ring-opening, in which it serves as an electrophile (Scheme 1A).^6–8 We envisioned that, if a nucleophilic group is installed in the 3-position (e.g., amino group), such molecules should exhibit 1,3-amphoteric reactivity due to the presence of both nucleophilic and electrophilic sites (Scheme 1B). Importantly, the 1,3-relative position is crucial for inhibiting self-destructive intra- or intermolecular ring-opening (i.e. the 3-nucleophilic site attack on oxetane itself) due to high barriers. Thus, such orthogonality is beneficial to their stability. In contrast, the nucleophilic site is expected to react with an external polarized π bond (e.g., X = Y, Scheme 1B), which enables a better-positioned nucleophile (Y) to attack the oxetane and cyclize. Thus, a formal [3 + 2] annulation should be expected. Unlike the well-known S_N2 reactivity of oxetanes with simple bond formation, this amphoteric reactivity would greatly enrich the chemistry of oxetanes with multiple bond formations and provide expedient access to various heterocycles. In contrast to the conventional approaches that require presynthesis of advanced intermediates (e.g., intramolecular ring-opening),⁸ the exploitation of such amphoteric reactivity in an intermolecular convergent manner from simple substrates would be more practically useful. Moreover, more activation modes could be envisioned in addition to oxetane activation. In 2015, Kleij and coworkers reported an example of cyclization between 3-aminooxetane and CO₂ in 55% yield, which provided a pioneering precedent.¹⁰ However, a systematic study to fully reveal such amphoteric reactivity in a broad context remains unknown in the literature.Open in a separate windowScheme 1Typical oxetane reactivity and the new amphoteric reactivity.To test our hypothesis, we began with the commercially available 3-aminooxetanes 1a and 1b as the model substrates. Phenyl thioisocyanate 2a and CS₂ were initially employed as reaction partners, as they both have a polarized C S bond as well as a relatively strong sulfur nucleophilic motif. Moreover, the resulting desired products, iminothiazolidines and mercaptothiazolidines, are both heterocycles with important biological applications (Fig. 2).¹¹ To our delight, simple mixing these two types of reactants in DCM resulted in spontaneous reactions at room temperature without any catalyst. The corresponding [3 + 2] annulation products iminothiazolidine 3a and mercaptothiazolidine 4a were both formed with excellent efficiency (Scheme 2). It is worth mentioning that catalyst-free ring-opening of an oxetane ring is rarely known, particularly for intermolecular reactions.^6–9 In this case, the high efficiency is likely attributed to the suitable choice and perfect position of the in situ generated sulfur nucleophile.Open in a separate windowFig. 2Selected bioactive molecules containing iminothiazolidine and mercaptothiazolidine motifs.Open in a separate windowScheme 2Initial results between 3-aminooxetanes and thiocarbonyl compounds.The catalyst-free annulation protocol is general with respect to various 3-aminooxetanes and isothiocyanates. A range of iminothiazolidines and mercaptothiazolidines were synthesized with high efficiency under mild conditions (Scheme 3). Many of them were obtained in quantitative yield. Quaternary carbon centers could also be generated from 3-substituted 3-aminooxetanes (e.g., 3j). The structure of product 3b was unambiguously confirmed by X-ray crystallography.Open in a separate windowScheme 3Formal [3 + 2] annulation with isothiocyanates and CS₂. Reaction conditions: 1 (0.3–0.4 mmol), 2 (1.1 equiv.) or CS₂ (1.5 equiv.), DCM (2 mL), RT, 3 h for 3 and 36 h for 4. Yields are for the isolated products.With the initial success of thiocarbonyl partners, we next turned our attention to isocyanates, in which the carbonyl group serves as the [3 + 2] annulation motif. Compared with sulfur as the nucleophilic site in the above cases, the oxygen atom is less nucleophilic. As expected, initial tests of the reactivity by mixing 1b and 5a resulted in no desired annulation product 6a in the absence of a catalyst (Table 1, entry 1). Next, Brønsted acids, including TsOH and the super acid HNTf₂, were examined as catalysts, but with no success (entries 2 and 3). We then resorted to various Lewis acids, particularly those oxophilic ones, in hope of activating the oxetane unit. Unfortunately, many of them still remained ineffective (e.g., ZnCl₂, AuCl, and FeCl₃). However, to our delight, further screening of stronger Lewis acids helped identify Sc(OTf)₃, Zn(OTf)₂, and In(OTf)₃ to be effective at room temperature, leading to the desired iminooxazolidine product 6a in good yield (entries 7–9). Its structure was confirmed by X-ray crystallography. Nevertheless, aiming to search for a cheaper catalyst, we continued to optimize this reaction at a higher temperature using previous ineffective catalysts. Indeed, FeCl₃ was found to be effective at 80 °C (61% yield, entry 10), while Brønsted acid TsOH remained ineffective at this temperature (entry 11). Notably, decreasing the loading of FeCl₃ to 1 mol% led to a higher yield (89% yield, entry 12). However, further decreasing to 0.5 mol% resulted in slightly diminished efficiency (entry 13).Reaction conditions for annulation with isocyanates^a