Experimental investigation of the effect of temperature on the strength of polyimide contact structures

A new photogrammetry based measurement technique for contact areas in line contact structures is developed. From the data collected by this technique, a method for measuring the contact strength of contact structures in high temperature applications is proposed. The contact strength of a line contact structure of polyimide at different temperatures is measured; the results show that the increase in temperature decreases the contact strength of the structure. The effect of temperature on the contact strength is studied by investigating the occurrence and evolution of yielding core within the structure at different temperatures. The decrease in the yield strength and elastic modulus of the polyimide material at high temperature induces core yielding at lower loads and eases the propagation of core yielding to the surface.     

The introduction of antibacterial drug pipemidic acid into the POM field: Syntheses, characterization and antitumor activity

Two new compounds based on polyoxometalates (POMs) and the quinolone antibacterial drug pipemidic acid (HPPA), {[Ni(PPA)₂]H₄[SiW₁₂O₄₀]}·HPPA·3H₂O (1), and {[Zn(PPA)₂]₂H₄[SiW₁₂O₄₀]}·3H₂O (2), have been synthesized under hydrothermal conditions and structurally characterized by routine technique. Single-crystal X-Ray diffraction analysis shows that compound 1 is constructed by Keggin clusters grafted by binuclear nickel clusters, isolated HPPA and water molecules, while compound 2 consists of Keggin clusters grafted by binuclear zinc clusters and water molecules. Due to the selection of different transition metal (TM) ions, compounds 1 and 2 exhibit different structures and antitumor activities. Compound 1 possesses 0D structure and shows no antitumor activities. However, compound 2 possesses 1D structure and exhibits higher antitumor activities than its parent compound. The results show that introduction of different TM-PPA moieties onto the polyoxoanion surface can affect not only the final structures but also their antitumor activities.     

萘咪唑类稀土配合物的晶体结构和荧光性质

通过2-（2''-羟基-3''-甲氧基）萘咪唑（HL）和Ln（NO）₃·6H₂O反应,合成了4种单核稀土配合物[Ln（HL）₂（NO₃）₃]·CH₂Cl₂（Ln=Sm（1）,Eu（2）,Tb（3））和[Ln（HL）₂（NO₃）₂（CH₃OH）]NO₃·CH₃OH（Ln=Yb（4））。X射线单晶衍射分析表明配合物1~4均通过配体萘环间的π-π作用呈现蝴蝶状结构。荧光性质表明仅有配合物4显示Yb³⁺稀土离子的特征发光,固态和在乙腈溶液中的荧光寿命分别为8.27 μs和4.40 μs。     

钴掺杂Sr1.5La0.5MnO4的合成及高温电化学性能研究

采用EDTA-柠檬酸法合成了中温固体氧化物燃料电池阴极材料Sr_1.5La_0.5Mn_1-xCo_xO₄（SLMCO_x）,并利用粉末X射线衍射（XRD）、X射线光电子能谱（XPS）以及电化学交流阻抗谱（EIS）进行表征。结果表明,该材料与Ce_0.9Gd_0.1O_1.95（CGO）在1 200℃烧结12 h不发生化学反应。随着Co掺入量的增加,氧化物中Mn³⁺和Co²⁺含量增多,晶格氧含量降低,晶格畸变率增大。交流阻抗谱（EIS）测试结果显示,钴的掺杂明显降低电极的极化电阻,其中Sr_1.5La_0.5Mn_0.7Co_0.3O₄阴极在700℃空气中的极化电阻为0.62 Ω·cm²,明显小于Sr_1.5La_0.5MnO₄阴极在750℃的极化电阻（1.5 Ω·cm²）,表明钴掺杂的Sr_1.5La_0.5Mn_1-xCo_xO₄是一种潜在的IT-SOFC阴极材料。     

(Pr0.9La0.1)2(Ni0.74Cu0.21Ga0.05)O4+δ-Ce0.9Gd0.1O2-δ复合阴极的制备及电化学性质

采用EDTA-柠檬酸盐法制备了（Pr_0.9La_0.1）₂（Ni_0.74Cu_0.21Ga_0.05）O_4+δ（PLNCG）,并与Ce_0.9Gd_0.1O_2-δ（CGO）形成复合阴极PLNCG-CGO。XRD和SEM分析结果表明PLNCG与CGO在1 000℃具有较好的化学相容性。电化学阻抗测试结果表明PLNCG-30% CGO复合阴极在700℃的极化电阻为0.092 Ω·cm²;过电位为39.3 mV时,电流密度达到113.3 mA·cm^-2。氧分压分析表明电极反应的速率控制步骤为电荷转移过程。阳极支撑单电池（Ni-CGO/CGO/PLNCG-30% CGO）在700℃的最大输出功率密度达到569 mW·cm^-2,开路电压（OCV）为0.76 V。综上结果预示PLNCG-30% CGO复合阴极是一种有发展前景的电极材料。     

中温固体氧化物燃料电池阴极材料LaBiMn2O6的制备与性能研究

采用固相法合成了中温固体氧化物燃料电池(IT-SOFCs)阴极材料LaBiMn₂O₆,并利用X射线衍射(XRD)和电化学阻抗谱(EIS)进行表征.结果表明该材料与电解质Ce_0.7Bi_0.3O_1.85(CBO)在1 000 ℃烧结12 h不发生反应.交流阻抗和直流极化测试结果发现,阴极极化电阻随测试温度的增加而逐渐减小,700 ℃空气中的极化电阻为0.71 Ω·cm²;氧分压测试结果显示,在600~700 ℃范围内,电极反应的速率控制步骤为电极上发生的电荷转移反应.电极过电位为85 mV时,700 ℃的阴极电流密度达到 216 mA·cm^-2 ,表明LaBiMn₂O₆是一种潜在的中温固体氧化物燃料电池(IT-SOFCs)阴极材料.     

Advances in pesticide biosensors: current status, challenges, and future perspectives

Public concern over pesticide residues has been increasing dramatically owing to the high toxicity and bioaccumulation effects of pesticides and the serious risks that they pose to the environment and human health. It is therefore crucial to monitor pesticide residues by using various analytical methods and techniques, especially highly sensitive, highly selective, simple, rapid, cost-effective, and portable ones. Biosensor strategies have become research hotspots and ideal candidates for pesticide detection, having such features as high sensitivity, fast response, robustness, low cost and miniaturization, as well as in situ and real-time monitoring. This review covers advances in the design and fabrication of biosensors for pesticide detection since 2005. Special emphasis is placed on the state-of-art selection of receptors, the use of different transduction techniques and fast screening strategies, and the application of various biosensors developed in food and environmental safety. Both advantages and drawbacks of these techniques are then summarized. Finally, challenges, strategies, and perspectives in further developing pesticide biosensors are also discussed.

Calculations of dynamic dipole polarizabilities of Li and Na atoms in debye plasma using the model potential technique

The effects of Debye plasma on the frequency‐dependent polarizabilities of Li and Na atoms are investigated using symplectic algorithm within the framework of the pseudostate summation technique. Dynamic dipole polarizabilities of Li (2s ²S) and Na(3s ²S) as functions of scaled number density of the plasma electrons for arbitrary plasma temperature are presented. Screening effects on the resonance frequencies are also presented. In free‐atomic cases, our calculated results are comparable with the reported theoretical and experimental predictions. © 2012 Wiley Periodicals, Inc.     

Ab‐Initio study of Helium‐small carbon cage systems

The traditional method for opening the electron shells of noble gas atoms involves a strong electronegative atom or group. However, this approach is limited to only heavy noble‐gas atoms, such as Kr and Xe. In this paper, we performed accurate calculations of He@C₈H₈ and He@C10H16 and showed the possibility of opening the electron shell of a light noble‐gas atom. © 2012 Wiley Periodicals, Inc.