Stability analysis for stochastic jump systems with time-varying delay

This paper deals with the mean-square asymptotic stability of stochastic Markovian jump systems with time-varying delay. Based on a new stochastic inequality and convex analysis property, some novel stability conditions are presented. In the derivation, the information of the time-varying delay is retained and the estimation of it by the worst-case enlargement is not involved. Some special cases of the systems under consideration are also investigated. Illustrative examples are given to show the effectiveness of the proposed approach.     

Effect of ethanediamine on bio-polishing of cotton fabrics with cellulase

n-Propylamine and n-butylamine showed an inhibitory effect on cellulase A and cellulase B, while ethanediamine displayed a positive effect on both of these cellulases. Relative filter paper activity and relative CMCase activity of cellulase A and cellulase B measured at 50 °C were increased by 16.0 and 25.2 %, and 18.9 and 13.9 %, respectively, by the appearance of ethanediamine at a certain concentration. Also the addition of ethanediamine maintained the thermal stability of cellulase A and B at 65 °C to some extent and showed a stronger stabilizing effect on cellulase A than cellulase B. Third, the addition of ethanediamine within a certain concentration range enhanced the bio-polishing effect of cotton fabric enzymatic treatment at 50 °C to some extent, obtaining a close bio-polishing effect of cotton fabrics treated at 50 °C; the addition of ethanediamine saved some of the dose of cellulase A and B. Last but not least, the appearance of ethanediamine broadened the operating temperature of cellulase A to 65 °C, and it had a less positive effect on cellulase B at 65 °C.     

Precipitated droplets in-situ cross-linking polymerization and its applications

A novel, green and effective approach to fabricate uniform functional spherical polymer particles remains a huge challenge. Herein, we present a novel one-pot approach superior to traditional precipitation polymerization, called precipitated droplets in-situ cross-linking (PDIC) polymerization, by which uniform particles are fabricated on large scale without any toxic organic solvents or stabilizers. With this approach, functional spherical polymer particles can be fabricated continuously only relying on gravity, and the preparation process is thus super-fast. For example, polyacrylic acid (PAA) hydrogel particles with ultra-high adsorption capacity are fabricated within only 60 s. Moreover, we have successfully fabricated different functional hydrogel particles, including anticoagulant, reinforced and bactericidal particles, based on the monomers of 2-acrylamide-2-methylpropanesulfonic acid (AMPS), acrylamide (AM) and [2-(methacryloyloxy)ethyl]trimethylammonium chloride (DMC), respectively. This approach has several advantages: (i) the technology is green; (ii) the size and porosity of the particles can be well-controlled; (iii) various functional spherical hydrogel particles can be fabricated by using corresponding monomers. More importantly, this approach fits the commercialization of functional hydrogel particles on demand.     

Advancements in subsea riser analysis using quasi-rotations and the Newton–Raphson method

Beam structures undergoing finite deflections and rotations in space have extensive application in the subsea industry particularly for the analysis of holistic systems with larger numbers of mooring and riser components. In using the finite element analysis approach, there is an increasing requirement for large element sizes which preserve accuracy with regard to the coupling of axial, bending and torsion response.The authors outline a method for improving the current state of practice for the analysis of riser systems. The approach draws on the convected coordinates method, Euler–Bernoulli beam theory, the principle of virtual work and the finite element method. Two quasi-rotation measures are developed including a quasi-material rotation definition for rotational deformation relative to the convected axis of a beam and a quasi-space rotation definition to deal with the path dependent nature of rotations in three dimensions.The novel aspect of this work is to relate the rate of change of the quasi-material rotation vector along the beam axis to a linear transformation of the beam axis rate-of-rotation vector through utilising the convected coordinates axes system. In this way, incremental values of quasi-material rotation are directly linked to incremental values of nodal quasi-space rotation and a global Newton–Raphson solution technique for interconnecting beam elements is straightforward to assemble.Furthermore, this leads to accurate definitions of coupled axial, bending and torque response for beams with significant deflection. The approach has particular advantages in the analysis of subsea riser sections. Also, the accuracy of the solution is preserved for a fewer number of elements compared to alternative solutions for computationally sensitive load cases with highly non-linear loading regimes.     

H2S gas sensor based on integrated resonant dual-microcantilevers with high sensitivity and identification capability

Detection of trace-level hydrogen sulfide (H₂S) gas is of great importance whether in industrial production or disease diagnosis. This research presents a novel H₂S gas sensor based on integrated resonant dual-microcantilevers which can identify and detect trace-level H₂S in real-time. The sensor consists of two integrated resonant microcantilever sensors with different functions. One cantilever sensor can identify H₂S by outputting positive frequency shift signals, while the other cantilever sensor will detect H₂S as a normally used cantilever sensor with negative frequency shifts. Combined the two cantilever sensors, the proposed gas sensor can distinguish H₂S from a variety of common gases, and the detection limit to H₂S of the sensor is as sensitive as below 1 ppb.     

The “Fingerprint” of a freshwater microalga Scenedesmus sp. LX1: Visualizing the composition of its soluble algal products

The composition of soluble algal products was visualized by a fingerprint analytical method.     

Subtle Alignment of Organic Semiconductors at the Donor/Acceptor Heterojunction Facilitates the Photoelectric Conversion Process

Chinese Journal of Polymer Science - The aligned molecular packing structure is vital to the anisotropic charge transport in conjugated polymer and small molecule thin films. However, how this...     

Potent Anticancer Efficacy of First-In-Class CuII and AuIII Metaled Phosphorus Dendrons with Distinct Cell Death Pathways

First-in-class Cu^II and Au^III metaled phosphorus dendrons were synthesized and showed significant antiproliferative activity against several aggressive breast cancer cell lines. The data suggest that the cytotoxicity increases with reducing length of the alkyl chains, whereas the replacement of Cu^II with Au^III considerably increases the antiproliferative activity of metaled phosphorus dendrons. Very interestingly, we found that the cell death pathway is related to the nature of the metal complexed by the plain dendrons. Cu^II metaled dendrons showed a potent caspase-independent cell death pathway, whereas Au^III metaled dendrons displayed a caspase-dependent apoptotic pathway. The complexation of plain dendrons with Au^III increased the cellular lethality versus dendrons with Cu^II and promoted the translocation of Bax into the mitochondria and the release of Cytochrome C (Cyto C).     

Bi/Bi_2O_3 nanoparticles supported on N-doped reduced graphene oxide for highly efficient CO_2 electroreduction to formate

Electrocatalytic CO_2 reduction(CO_2 ER) into formate is a desirable route to achieve efficient transformation of CO_2 to value-added chemicals,however,it still suffers from limited catalytic activity and poor selectivity.Herein,we develop a hybrid electrocatalyst composed of bismuth and bismuth oxide nanoparticles(NPs) supported on nitrogen-doped reduced graphene oxide(Bi/Bi_2 O_3/NrGO) nanosheets prepared by a combined hydrothermal with calcination treatment.Thanks to the combination of undercoordinated sites and strong synergistic effect between Bi and Bi_2 O_3,Bi/Bi_2 O_3/NrGO-700 hybrid displays a promoted CO2 ER catalytic performance and selectivity for formate production,as featured by a small onset potential of-0.5 V,a high current density of-18 mA/cm~2,the maximum Faradaic efficiency of85% at-0.9 V,and a low Tafel slope of 166 mV/dec.Experimental results reveal that the higher CO_2 ER performance of Bi/Bi_2 O_3/NrGO-700 than that of Bi NPs supported on NrGO(Bi/NrGO) can be due to the partial reduction of Bi_2 O_3 NPs into Bi,which significantly increases undercoordinated active sites on Bi NPs surface,thus boosting its CO_2 ER performance.Furthermore,a two-electrode device with Ir/C anode and Bi/Bi_2 O_3/NrGO-700 cathode could be integrated with two alkaline batteries or a planar solar cell to achieve highly active water splitting and CO_2 ER.     

A possible human counterpart of the principle of increasing entropy

It is well-known that the principle of increasing entropy holds for isolated natural systems that contain non-adaptive molecules. Here we present, for the first time, an experimental evidence for a possible human counterpart of the principle in an isolated social system that involves adaptive humans. Our work shows that the human counterpart is valid even though interactions among humans in social systems are distinctly different from those among molecules in natural systems. Thus, it becomes possible to understand social systems from this natural principle, at least to some extent.