“元素化学实验”中的“异常”现象(一)--Mn元素化学实验中的“异常”现象及其探析

大一学生在“元素化学实验”教学过程中,对反应条件如温度、催化剂、酸度、浓度或试剂用量等因素的影响考虑不周,可能出现某些实验现象和预想的或理论分析的结果不一致的“异常”现象。本文就学生在Mn元素化学实验过程中遇到的一些“异常”现象进行分析和总结,借助生动直观的演示实验,引导学生探究“异常”现象产生的可能原因和直观认识反应条件对反应结果的影响,培养学生的观察、分析、判断、归纳、推理和解决实际问题的能力。     

Nonenzymatic Electrochemical Sensor for Wearable Interstitial Fluid Glucose Monitoring

We report on a nonenzymatic electrochemical sensor for wearable glucose monitoring in interstitial fluid. The sensor exhibited acceptable selectivity and reliability for continuous glucose detection for up to 30 days. The sensor tip is coated with polyurethane, and the biocompatibility of the tip is investigated by tissue staining. A fully integrated wearable glucose monitoring system is developed with a wireless connection with a smartphone. The test results are in agreement with reference methods. So, we believe the sensor is promising for the development of a continuous glucose monitoring system and diabetes management.     

Selection of hydrogel electrolytes for flexible zinc–air batteries

Flexible zinc–air batteries attract more attention due to their high energy density, safety, environmental protection, and low cost. However, the traditional aqueous electrolyte has the disadvantages of leakage and water evaporation, which cannot meet application demand of flexible zinc–air batteries. Hydrogels possessing good conductivity and mechanical properties become a candidate as the electrolytes of flexible zinc–air batteries. In this work, advances in aspects of conductivity, mechanical toughness, environmental adaptability, and interfacial compatibility of hydrogel electrolytes for flexible zinc–air batteries are investigated. First, the additives to improve conductivity of hydrogel electrolytes are summarized. Second, the measures to enhance the mechanical properties of hydrogels are taken by way of structure optimization and composition modification. Third, the environmental adaptability of hydrogel electrolytes is listed in terms of temperature, humidity, and air composition. Fourth, the compatibility of electrolyte–electrode interface is discussed from physical properties of hydrogels. Finally, the prospect for development and application of hydrogels is put forward.     

Fabrication and Excellent Antibacterial Activity of Well-defined CuO/Graphdiyne Nanostructure

Copper oxide(CuO),due to its low cost,good chemical and physical stability,has recently been given special attention as a potential candidate for antibacterial agents.However,developing novel CuO nanocomposites with improved antibacterial property and unraveling the interface promotion mechanism has been a fundamental challenge for decades.Herein,well-defined CuO/graphdiyne(CuO/GDY)nanostructures with uniformly anchored CuO nanoparticles(ca.4.5 nm)have been fabricated.The CuO/GDY nanostructure exhibited superior E.coli inactivation efficiency,which is nearly 19 times and 7.9 times higher than the bare GDY and commercial CuO,respectively.The improved E.coli inactivation performance was mainly due to the increased reactive O2-species generated by the activation of molecular O2 over CuO/GDY surface.These findings demonstrate the efficient antibacterial activity of well-defined CuO/GDY nanostructures and provide insights on the development of efficient GDY-based antibacterial materials.     

Progress of Jinping Underground laboratory for Nuclear Astrophysics (JUNA)

Jinping Underground laboratory for Nuclear Astrophysics(JUNA) will take the advantage of the ultra-low background of CJPL lab and high current accelerator based on an ECR source and a highly sensitive detector to directly study for the first time a number of crucial reactions occurring at their relevant stellar energies during the evolution of hydrostatic stars. In its first phase, JUNA aims at the direct measurements of~(25)Mg(p,γ)~(26)Al,~(19)F(p,α)~(16)O,~(13)C(α,n)~(16)O and ~(12)C(α,γ)~(16)O reactions. The experimental setup,which includes an accelerator system with high stability and high intensity, a detector system, and a shielding material with low background, will be established during the above research. The current progress of JUNA will be given.     

Semileptonic B<Subscript>c</Subscript> decays and charmonium distribution amplitude

In this paper we study the semileptonic decays of the B_c meson in the light-cone sum rule (LCSR) approach. The result for each channel depends on the corresponding distribution amplitude (DA) of the final meson. For the case of B_c decaying into a pseudoscalar meson, to twist-3 accuracy only the leading twist distribution amplitude is involved if we start from a chiral current. If we choose a suitable chiral current in the vector meson case, the main twist-3 contributions are also eliminated and we can consider the leading twist contribution only. The leading twist distribution amplitudes of the charmonium and other heavy mesons are given by a model approach in a reasonable way. Employing this charmonium distribution amplitude we find a cross section that is consistent with Belle and BaBar data. Based on this model, we calculate the form factors for various B_c decay modes in the corresponding regions. Extrapolating the form factors to the whole kinetic regions, we get the decay widths and branching ratios for various B_c decay modes including their τ modes when they are kinematically accessible. PACS 13.20.He; 13.20.Fc; 11.55.Hx     

Syntheses,crystal structures and magnetic properties of two new cyano-bridged bimetallic complexes

Transition Metal Chemistry - Two complexes [Fe(1,10-phen)2Ni(CN)4]n (1), {[Fe2(1,10-phen)4(CN)4Co2(1,10-phen)2Fe(CN)6]·2H2O}n (2) were prepared in the reaction of K3[Fe(CN)6] as cyanometalate...     

Implications of Nitrogen Doping on Geometrical and Electronic Structure of the Fullerene Dimers

Because of its unsaturated bonds, C₆₀ is susceptible to polymerize into dimers. The implications of nitrogen doping on the geometrical and electronic structure of C₆₀ dimers have been ambiguous for years. A quarter‐century after the discovery of azafullerene dimer (C₅₉N)₂, we reported its single crystallographic structure in 2019. Herein, the unambiguous crystal structure information of (C₅₉N)₂ is elucidated specifically, revealing that the inter‐cage C—C single bond length of (C₅₉N)₂ is comparable with that of an ordinary C(sp³)‐C(sp³) single bond, and that the most stable conformer of (C₅₉N)₂ is gauche‐conformer with a dihedral angle of 66°. To amend the structural deviations, geometrical structure of (C₅₉N)₂ is optimized by a B3LYP‐D3BJ function, which is proved to be more consistent with its single crystal structure than those by the commonly used B3LYP function. Moreover, the calculation method is also suitable for other representative fullerene dimers, such as (C₆₀)₂ and its divalent anion. Additionally, the dissociation of (C₅₉N)₂ at 473 K under mass spectrometric conditions suggests the inter‐cage C—C bond is relatively weaker than an ordinary C—C single bond, which can be explained by the interaction energies of inter‐cages.     

金-石墨烯修饰电极电化学检测塑料瓶中双酚A

在离子液体碳糊电极(CILE)表面上采用一步电还原法制备了纳米金(nAu)-石墨烯(GR)复合膜修饰电极(nAu-GR/CILE)。研究了双酚A(BPA)在nAu-GR/CILE上的电化学行为,BPA的电极反应过程为受吸附控制的不可逆过程;采用示差脉冲伏安法研究了BPA氧化峰电流和浓度之间的关系,在0.08~400.0μmol/L范围内,检出限为0.021μmol/L(3σ)。将nAu-GR/CILE用于塑料瓶中BPA的检测,与采用高效液相色谱法(HPLC)进行对比,结果表明两种方法对BPA的检测结果相吻合。     

Three-dimensional porous photo-thermal fiber felt with salt-resistant property for high efficient solar distillation

The urgent need for fresh water resource is a public issue facing the world. Solar distillation for seawater desalination is a promising freshwater production method. Interfacial solar evaporation systems based on 2D photo-thermal membranes have been widely studied, but salt pollution is one of the main challenges for solar distillation. In order to solve this problem, a hydrophilic three-dimensional (3D) porous photo-thermal fiber felt (PFF) was obtained by one-step method, through a simple polydopamine (PDA) coating method with hydrophobic graphite felt as a substrate. The PFF had a good evaporation rate of 1.48 kg m^?2 h^-1 and its corresponding light-vapor conversion efficiency reached 87.4%. In addition, the PFF exhibited an excellent salt-resistant ability when applied to photo-thermal evaporation of high-salinity seawater with 10 wt% NaCl, owing to its intrinsic 3D macroporous structure for the migration circulation of salt ions. The development of the PFF offers a new route for the exploration of salt-resistant photo-thermal materials and is promising for the practical application of solar distillation.