Optical Multisensor Systems in Analytical Spectroscopy

Journal of Analytical Chemistry - A review of works in developing optical multisensor systems, a new class of specialized spectroscopic analyzers, is presented. The development and use of such...     

Metamorphic InAs(Sb)/InGaAs/InAlAs nanoheterostructures grown on GaAs for efficient mid-IR emitters

High-efficiency semiconductor lasers and light-emitting diodes operating in the 3–5?μm mid-infrared (mid-IR) spectral range are currently of great demand for a wide variety of applications, in particular, gas sensing, noninvasive medical tests, IR spectroscopy etc. III-V compounds with a lattice constant of about 6.1?Å are traditionally used for this spectral range. The attractive idea to fabricate such emitters on GaAs substrates by using In(Ga,Al)As compounds is restricted by either the minimum operating wavelength of ～8?μm in case of pseudomorphic AlGaAs-based quantum cascade lasers or requires utilization of thick metamorphic In_xAl_1-xAs buffer layers (MBLs) playing a key role in reducing the density of threading dislocations (TDs) in an active region, which otherwise result in a strong decay of the quantum efficiency of such mid-IR emitters. In this review we present the results of careful investigations of employing the convex-graded In_xAl_1-xAs MBLs for fabrication by molecular beam epitaxy on GaAs (001) substrates of In(Ga,Al)As heterostructures with a combined type-II/type-I InSb/InAs/InGaAs quantum well (QW) for efficient mid-IR emitters (3–3.6?μm). The issues of strain relaxation, elastic stress balance, efficiency of radiative and non-radiative recombination at T?=?10–300?K are discussed in relation to molecular beam epitaxy (MBE) growth conditions and designs of the structures. A wide complex of techniques including in-situ reflection high-energy electron diffraction, atomic force microscopy (AFM), scanning and transmission electron microscopies, X-ray diffractometry, reciprocal space mapping, selective area electron diffraction, as well as photoluminescence (PL) and Fourier-transformed infrared spectroscopy was used to study in detail structural and optical properties of the metamorphic QW structures. Optimization of the growth conditions (the substrate temperature, the As₄/III ratio) and elastic strain profiles governed by variation of an inverse step in the In content profile between the MBL and the InAlAs virtual substrate results in decrease in the TD density (down to 3?×?10⁷ cm^?2), increase of the thickness of the low-TD-density near-surface MBL region to 250–300?nm, the extremely low surface roughness with the RMS value of 1.6–2.4?nm, measured by AFM, as well as rather high 3.5?μm-PL intensity at temperatures up to 300?K in such structures. The obtained results indicate that the metamorphic InSb/In(Ga,Al)As QW heterostructures of proper design, grown under the optimum MBE conditions, are very promising for fabricating the efficient mid-IR emitters on a GaAs platform.     

Asymptotic Behavior of Least Energy Solutions for a Fractional Laplacian Eigenvalue Problem on ℝN

Acta Mathematica Sinica, English Series - We are interested in the existence and asymptotic behavior for the least energy solutions of the following fractional eigenvalue problem $$\left({\rm{P}}...     

Numerical Simulation of Physical Fields by the Collocation Method

Russian Physics Journal - The article describes the collocation method for the numerical solution of mathematical physics boundary value problems. By arranging the collocation nodes in a special...     

喷雾干燥-固相煅烧法制备球形钛酸狸负极材料的研究

通过喷雾干燥-固相煅烧法制备了球形钛酸钾.不同于传统喷雾干燥工艺采用固态钛源进行制备,本文采用的前驱体是钾盐,分散剂和钛酸四丁酯制备出的硝酸氧钛的混合溶液.由于制备方法中前驱体为原子级均匀分布,化学计量比可精确控制,制备出的材料颗粒细小,粒径、成分分布均匀,电化学性能优异.同时研究了不同钾钛摩尔比以及煅烧温度对球形钛酸钾的形貌和成分的影响,并研究了其作为钾离子电池电极材料的电化学性能.结果表明,钾钛摩尔比为0.816,煅烧温度为 800 ℃时钛酸钾的电化学性能最好,首圈容量 185.1 mAh/g,30 圈后容量为173.9 mAh/g,循环100圈后还有169.7 mAh/g的容量.     

狄拉克材料BaMnBi2的单晶制备和物理性质研究

在本工作中,我们成功制备了层状过渡金属磷族化合物BaMnBi2单晶样品,并研究了该化合物的磁学性质和电学输运性质.准二维化合物BaMnBi2具有四方晶体结构,主要包含有两个Bi四方格子层和一个共边的MnBi4四面体层.磁化率显示BaMnBi2在TN ＝288 K以下发生反铁磁相变,并表现出很强的磁各向异性.在反铁磁相变温度TN 以上,磁化率随温度呈线性关系,暗示体系在顺磁态具有很强的反铁磁关联.电阻率随温度变化曲线和在磁场下电阻率随角度的变化曲线都表明BaMnBi2具有准二维的电子结构.磁场导致的金属-绝缘体转变和低温下大的非饱和线性磁阻,与Bi四方格子层存在狄拉克费米子是一致的.     

基于电化学老化衰退模型的锂离子动力电池外特性

当前锂离子动力电池电化学模型存在模型复杂、建模难度大、计算效率低、老化评估效果差的问题,本文提出一种考虑电池衰退老化的机理模型(ADME).本文首先通过有限差分法对伪二维(P2D)电化学模型进行离散降阶处理,得到简化伪二维(SP2D)模型.在SP2D模型的基础上,基于阴阳两极发生的副反应导致的衰退老化现象,提出一种考虑电池衰退老化的机理模型.其次,使用多变量偏差补偿最小二乘法实现模型参数辨识.最后通过动力电池衰退老化性能循环实验,对比分析了恒流、脉冲工况下SP2D模型和ADME模型的终端电压输出.结果表明:ADME模型较为简单、计算效率和估算精度高,可以有效评估电池容量老化衰退,得到理想的锂离子动力电池外特性曲线.     

Synthesis of Substituted Aminopyrimidines as Novel Promising Tyrosine Kinase Inhibitors

Russian Journal of Organic Chemistry - A procedure has been proposed for the synthesis of a series of substituted N-(1,3-thiazol-2-yl)-pyrimidin-2-amines and N-(pyrimidin-2-yl)thioureas by...     

三维层状双金属氢氧化物(3D-LDHs)的制备及应用概述

三维层状双金属氢氧化物简称3D-LDHs,是在制备普通二维层状金属氢氧化物(2D-LDHs)的过程中,改变反应条件得到的三维结构产物.它的组成单元与二维产物相同为完整LDHs纳米片,基本保留了LDHs具有的碱性、阴离子可交换性和记忆效应等特点,同时又因三维结构获得了更大的比表面积、丰富的孔隙结构以及形成复合材料的能力,在吸附、催化和电化学等方面的应用性能得以增强.本文概述了3D-LDHs的组成结构、主要制备方法及产物形貌,并对未来的研究方向进行了展望.