Repetition rate multipliers for efficient implementation of multiphoton and pump-probe fluorescence microscopy

With the advances in pulsed laser systems, microscopic imaging techniques such as multiphoton and pump-probe fluorescence microscopy have developed into effective tools for investigating intensity and time-resolved phenomena inside biological systems. However, pulsed lasers used in these techniques usually are commercial systems with repetition frequencies of around 80 MHz. While these systems have proven to be adequate for multiphoton and pump-probe microscopic imaging applications, the temporal separation of the laser pulse train (around 12.5 ns) is long compared to the fluorescence lifetimes of many common fluorescence species. In this work, we present the designs of repetition rate multipliers based on passive optical components that can be used to increase the efficiency in multiphoton and pump-probe fluorescence microscopy. Depending on the lifetime of fluorescence molecules under investigation, the passive repetition rate multiplier can increase the duty cycle of multiphoton or pump-probe microscopy up to fourfold.     

加速牛顿迭代收敛的新方法

提出了加速牛顿迭代收敛的新思想，构造出一类加权牛顿迭代格式，通过选取最优加权因子，使得该格式具有高阶收敛性和较小的渐近误差常数。     

Formation of p-type ZnO film on InP substrate by phosphor doping

ZnO thin film was initially deposited on InP substrate by radio frequency (rf) magnetron sputtering and the diffusion process was performed using the closed ampoule technique where Zn₃P₂ was used as the dopant source. To verify the junction formation of ZnO thin films, the electrical properties were measured, and the effects of Zn₃P₂ diffusion on ZnO thin films were investigated. It is observed that the electrical property of the film is changed from n-type to p-type by dopant diffusion effect. Based on the results, it is confirmed that ZnO thin films can be a potential candidate for ultraviolet (UV) optical devices.     

光参量啁啾脉冲放大增益特性研究

 通过对非线性三波耦合方程组进行数值求解，研究了光参量放大的增益特性及饱和放大特性。给出了泵浦光、信号光参数对参量增益的影响及其与晶体饱和长度的关系。且OPA具有传统CPA系统所不具有的优点，将有可能取代传统的CPA系统而作为超短超强激光系统的新型前端。     

Solid codes and the uniform density of fd-domains

By means of further investigation of solid codes,the problem“Is every fd-domain uni- formly dense”proposed by Yuqi Guo,C.M.Reis and G.Thierrin in 1988 is solved in this paper.     

流动注射-ICP光谱分析中的基体效应和酸效应研究

本文讨论了流动注射-ICP光谱分析中的基体效应和酸效应。当基体(Na、Ca、Fe、Zn)的浓度大于5mg/ml时,待测元素的谱线强度表现出不同程度的降低;上述基体的引入对激发温度和电子密度的影响不明显;基体产生的抑制效应可能与改变了待测元素粒子的激发几率的因素有关;于载流体中加入一定量的基体元素,是消除或降低基体效应的有效方法。酸(HCl、HNO_3、H_2SO_4)对待测元素表现出不同程度的抑制效应,其主要原因是物理干扰所致。     

单件小批生产系统下模糊优化的动态随机投入产出模型

本文针对单件小批量生产系统 ,建立了模糊优化的动态随机投入产出模型 ,同时给出了该模型的递推解法 ,并用此模型对某单件小批企业在生产计划期的商品量进行了规划     

Rb(62D)原子与基态Rb原子,H2分子碰撞转移截面

本文用荧光法测量Rb(6²D)原子与基态Rb原子,H₂分子碰撞转移截面。结果表明:Rb(6²D)-Rb(5²s)转移截面为σ_fs=67×10^-14cm²,σ_tr=4.3×10^-14cm²,Rb(6²D)—H₂转移截面为σ_fs 关键词：     

堵塞效应与“全同带”的微观机制

利用处理推转壳模型的改进了的粒子数守恒方法(严格计及堵塞效应),对原子核的转动惯量进行了计算,计算中无任何自由参数,所得转动惯量(包括¹⁷⁰Yb,¹⁷¹Lu¹⁷¹Yb各转动带)及其奇偶差,与实验非常符合,转动惯量的奇偶差灵敏地依赖于被堵塞的能级位置及其对Coriolis力的响应。     

停流—荧光动力学分析法测定痕量钛的研究

利用自行组装的停流-荧光动力学分析仪,采用停流法汇合流体动力注入技术,研究了钛与3.5-二溴水杨基荧光酮的荧光增强动力学反应性质,讨论了流速、进样时间对方法灵敏度和精密度的影响,提出了一个快速、简便、精确测定钛的分析方法,并用于稀土样品及合成样品中痕量钛的测定.方法检测限为8×10~(-3)ppm,大多数元素的干扰均可用动力学方法消除.