Mechanistic details of metal-free cyclization reaction of organophosphorus oxide with alkynes mediated by 2,6-lutidine and Tf2O

Theoretical investigations have elucidated the mechanism of metal-free electrophilic phosphinative cyclization of alkynes reaction reported by Miura and coworkers. Two competitive mechanisms I and II were explored without or with 2,6-lutidine. Both of I and II involve transformation of P(V) to P(III), electrophilic addition, ring opening and cyclization/cyclization, hydrogen-transfer, and oxidation. The rate-determining step of mechanism I and competitive less-step II is electrophilic [2 + 1] cycloaddition and electrophilic addition via single C P bond formation with activation barrier of 13.5 and 10.6 kcal/mol, respectively. Our calculation results suggested that the cumulative effect of the isomer of 2,6-lutidine and Tf₂O as well as TfO⁻ affects the title reaction to some extent, and simultaneously activates key reaction sites and reverses the polarities of them via the formation of abundant noncovalent interactions to decrease activation barriers of TSs. In addition, the effects of two series substituents on reactivity of phosphine oxide were investigated. Therefore, our study will serve as useful guidance for more efficient metal-free synthesis of organophosphorus compounds mediated by pyridine reagents.     

Ni-Co、Ni-Cu双金属合金催化剂用于CO甲烷化

以钙钛矿型复合氧化物LaNi_(0.9)Co_(0.1)O_3和LaNi_(0.9)Cu_(0.1)O_3为前驱体制备了Ni-Co/La_2O_3和Ni-Cu/La_2O_3双金属合金催化剂。结果表明,双金属合金催化剂中,各组分间相互稀释,具有较强的抗烧结性能;催化剂表面的积炭主要取决于CO在催化剂表面的吸附形态,Ni-Co双金属催化剂中,Co掺杂改变了CO在催化剂表面的吸附形式和吸附强度,使得Ni-Co双金属催化剂具有较强的抗积炭性能。Ni-Co双金属合金催化剂用于CO甲烷化反应时,显现出较好的活性、选择性和稳定性。     

Efficient and Stable Thin-Film Luminescent Solar Concentrators Enabled by Near-Infrared Emission Perovskite Nanocrystals

A novel triphenylphosphine (TPP) treatment strategy was developed to prepare the near-infrared emission CsPbI₃ nanocrystal (NC)-polymer composite thin-film luminescent solar concentrators (LSCs) featuring high absolute photoluminescence quantum yield (PLQY), low reabsorption, and high stability. The PL emission of the LSCs is centered at about 700 nm with 99.4±0.4 % PLQY and narrow full width at half maximum (FWHM) of 75 meV (30 nm). Compared with LSCs prepared with classic CsPbI₃ NCs, the stability of the LSCs after TPP treatments has been greatly improved, even after long-term (30 days) immersion in water and strong mercury-lamp irradiation (50 mW cm⁻²). Owing to the presence of lone-pair electrons on the phosphorus atom, TPP is also used as a photoinitiator, with higher efficiency than other common photoinitiators. Large-area (ca. 75 cm²) infrared LSCs were achieved with a high optical conversion efficiency of 3.1 % at a geometric factor of 10.     

Single-Molecule Magnetism in Dy2 Cluster Based on a Schiff Base Ligand

Two dinuclear Ln^III-based clusters, namely [Dy₂L₂(NO₃)₂(DME)₄] ( 1 ) and [Gd₂L₂(NO₃)₂(DME)₄] ( 2 ) [H₂L = (E)-2-((2-hydroxybenzylidene)amino)phenol] were obtained under hydrothermal condition. Two Ln^III ions are bridged by two phenolic hydroxyl oxygen atoms, and the distances of them are 3.829 Å (Dy1–Dy1A) and 3.860 Å (Gd1–Gd1A). Two Dy1–O–Dy1A and Gd1–O–Gd1A angles are 109.4° and 109.8°, respectively. Magnetic studies reveal a weak antiferromagnetic interaction between Gd ions in complex 2 , and single-molecule magnet behavior for 1 with U_eff = 49.9 K and τ₀ = 1.54 × 10^–6 s.     

Theoretical investigation on reverse intersystem crossing from upper triplet to lowest singlet: A “hot exciton” path for blue fluorescent OLEDs

Nowadays, blue fluorescent organic light-emitting diodes (FOLEDs) have attracted considerable attention from both academia and industry. According to spin statistics, electrical excitation results in the formation of ∼25% singlet excitons and ∼75% triplet excitons (signifying ~75% energy loss), which triggered wide-ranging efforts to harvest as many triplet excitons as possible. The materials that can convert triplet excitons into singlet excitons from the high-lying excited triplet states (referred as “hot exciton” channel) to realize high efficiency were reported, which can also efficaciously avoid the accumulation of triplet excitons in T₁ state. In this study, by means of density functional theory (DFT) and time-dependent DFT, we have theoretically investigated the electronic and photophysical properties of 16 newly designed molecules with donor-bridge-acceptor framework to search for the blue FOLED materials exploiting the “hot exciton” path. Important properties, such as singlet-triplet energy gaps, absorption and emission parameters, and reverse intersystem crossing rates (k_RISC), of five target molecules were studied. The calculated results demonstrate that thiophene-diphenylamine (k_RISC up to 1.03 × 10⁸ seconds⁻¹) may have promising potential as blue FOLED materials by virtue of the “hot exciton” effect.     

Facile Synthesis of MOF-derived Mn3O4@N-doped Carbon with Efficient Oxygen Reduction

Integration of MnO_x into the carbon matrix proves a viable strategy to improve the electrochemical performance of MnO_x materials. Mn₃O₄ nanoparticle-decorated N-doped carbon composites (Mn₃O₄@N-doped carbon) were facilely prepared from a non-porous eight-fold interpenetrated Zn^II-based MOF, which involves first synthesis of bimetallic Mn/Zn-MOF in one-pot reaction followed by direct pyrolysis at 1000 °C. In 0.1 m KOH solution, the optimal Mn₃O₄@N-doped carbon exhibits decent oxygen reduction activity with the onset potential (E_onset) of 0.94 V (vs. RHE) and half-wave potential (E_1/2) of 0.81 V (vs. RHE), excellent methanol tolerance as well as good durability.     

Fast and Selective Semihydrogenation of Alkynes by Palladium Nanoparticles Sandwiched in Metal–Organic Frameworks

The semihydrogenation of alkynes into alkenes rather than alkanes is of great importance in the chemical industry. Unfortunately, state-of-the-art heterogeneous catalysts hardly achieve high turnover frequencies (TOFs) simultaneously with almost full conversion, excellent selectivity, and good stability. Here, we used metal–organic frameworks (MOFs) containing Zr metal nodes (“UiO”) with tunable wettability and electron-withdrawing ability as activity accelerators for the semihydrogenation of alkynes catalyzed by sandwiched palladium nanoparticles (Pd NPs). Impressively, the porous hydrophobic UiO support not only leads to an enrichment of phenylacetylene around the Pd NPs but also renders the Pd surfaces more electron-deficient, which leads to a remarkable catalysis performance, including an exceptionally high TOF of 13835 h⁻¹, 100 % phenylacetylene conversion 93.1 % selectivity towards styrene, and no activity decay after successive catalytic cycles. The strategy of using molecularly tailored supports is universal for boosting the selective semihydrogenation of various terminal and internal alkynes.     

Self-Assembly of Highly Stable Zirconium(IV) Coordination Cages with Aggregation Induced Emission Molecular Rotors for Live-Cell Imaging

The self-assembly of highly stable zirconium(IV)-based coordination cages with aggregation induced emission (AIE) molecular rotors for in vitro bio-imaging is reported. The two coordination cages, NUS-100 and NUS-101, are assembled from the highly stable trinuclear zirconium vertices and two flexible carboxyl-decorated tetraphenylethylene (TPE) spacers. Extensive experimental and theoretical results show that the emissive intensity of the coordination cages can be controlled by restricting the dynamics of AIE-active molecular rotors though multiple external stimuli. Because the two coordination cages have excellent chemical stability in aqueous solutions (pH stability: 2–10) and impressive AIE characteristics contributed by the molecular rotors, they can be employed as novel biological fluorescent probes for in vitro live-cell imaging.     

红色荧光碳点的制备及其对过硫酸根的检测

以对苯二胺为碳源,乙醇为溶剂,采用溶剂热法合成红色荧光碳点(R-CDs)。 通过透射电子显微镜、紫外可见吸收光谱(UV-Vis)、红外光谱(FT-IR)、X射线光电子能谱(XPS)对其进行表征。 合成的R-CDs粒径约为(3.63±0.20) nm。 R-CDs的最大激发和发射波长分别为480和620 nm,具有激发波长独立性,光稳定性好。 基于静态猝灭,R-CDs的荧光可以被过硫酸根(S₂O₈^2-)有效猝灭。 在2.5~120 μmol/L范围内,S₂O₈^2-的浓度与R-CDs的荧光猝灭程度呈线性关系,相关系数(R²)为0.9970,检出限为1.2 μmol/L,具有良好的选择性和高灵敏度。 同时,该荧光传感体系可应用于自来水和湖水样品中S₂O₈^2-的检测。     

“非保护型”金属胶体纳米簇形成机理研究

碱-乙二醇法制备的"非保护型"金属及合金纳米簇由表面吸附的溶剂分子和简单离子实现稳定化,它们被广泛用于制备高性能复相催化剂和研究复相催化剂中的尺寸、组成、载体表面基团以及修饰剂对催化性能的影响。关于此类非保护金属纳米簇的形成过程及机理的认识尚有待进一步深化。本文采用原位快速扫描X射线吸收精细结构谱(QXAFS)、原位紫外-可见(UV-Vis)吸收光谱、透射电子显微镜和动态光散射技术研究了碱-乙二醇法合成中非保护型金属胶体纳米簇的形成过程与机理。结果表明,在碱-乙二醇法合成非保护型Pt金属纳米簇的过程中,室温下即有部分Pt(IV)被还原至Pt(II)。随着反应温度的升高,OH-逐渐取代与Pt离子配位的Cl-,在Pt―Pt键形成之前,反应体系的UV-Vis吸收光谱中可观察到明显的纳米粒子的散射信号,原位QXAFS分析表明Pt纳米簇是由Pt氧化物纳米粒子还原所形成的;在Ru金属纳米簇的形成过程中,OH-首先取代了Ru Cl_3中的Cl~-,形成羟基配合物Ru(OH) _6~(3-),后者进一步缩合形成氧化钌纳米粒子,最终Ru金属纳米簇由乙二醇还原氧化钌纳米粒子形成。由于先形成了氧化物纳米粒子,后续的还原反应被限制在氧化物纳米粒子内,使最终得到的非保护型金属纳米簇具有尺寸小、分布窄的特点。本工作所获得的知识对发展高性能能源转化催化剂、精细化学合成催化剂、传感器等功能体系具有重要意义。