包覆重钙粉为填充剂的橡胶加工及性能

重钙粉作为填充剂被广泛应用于橡胶加工过程,但由于其表面具有极性,分散性较差,导致与橡胶材料界面结合较差,影响了橡胶产品的抗拉强度、断裂伸长率等力学性能。 本文采用沉淀法,在CaCl₂-H₂O-NH₃-CO₂体系中生成碳酸钙直接结晶于重钙粉颗粒表面,实现对重钙粉的表面包覆,将n(CaCl₂)：n(重钙粉)=1：100、5：100、10：100的包覆重钙粉填充到天然橡胶和再生胶中,橡胶的力学性能与填充未包覆重钙粉的橡胶相比有了一定的提升。 通过比较,在填充量较大(8.5%、15%)时,包覆重钙粉橡胶产品在硬度、定伸应力等力学性能上要好于轻钙粉橡胶产品;在填充量(5%、8.5%)时,包覆重钙粉橡胶产品的抗拉强度、断裂伸长率接近于白炭黑,硬度高于白炭黑橡胶产品。     

Promotion of Ionic Liquid to Dimethyl Carbonate Synthesis from Methanol and Carbcn Dioxide

Promotion of ionic liquid, 1-ethyl-3-methylimidazolium bromide (emimBr), to the synthesis of dimethyl carbonate (DMC) from methanol and carbon dioxide in the presence of potassium carbonate and less amount of methyl iodide under mild conditions was investigated. The results showed that the high selectivity and raised yield of DMC was achieved due to the addition of emimBr in the reaction system. And effect of several reaction conditions such as temperature, pressure and amount of emimBr was discussed.     

Enhanced thermal properties and flame retardancy from a thermosetting blend of a phosphorus‐containing bismaleimide and epoxy resins

Epoxy resins modified by an organosoluble phosphorus‐containing bismaleimide (3,3′‐bis(maleimidophenyl) ­phenylphosphine oxide; BMPPPO) were prepared by simultaneously curing epoxy/diaminodiphenylmethane (DDM), and BMPPPO. The resulted epoxy resins were found to exhibit glass transition temperatures as high as 212 °C, thermal stability at temperatures over 350 °C, and excellent flame retardancy with Limited oxygen index (LOI) values around 40. Incorporation of BMPPPO into epoxy resins via the thermosetting blend was demonstrated to be an effective way to enhance the thermal properties and flame retardancy simultaneously. Copyright © 2003 John Wiley & Sons, Ltd.     

Quantitative analysis of 23-hydroxybetulinic acid in mouse plasma using electrospray liquid chromatography/mass spectrometry

23-Hydroxybetulinic acid is a newly isolated derivative of betulinic acid. The agent exhibits potential anti-tumor activity and functions in this regard via apoptosis. In support of pharmacokinetic and toxicological evaluations, a new assay based on liquid chromatography/mass spectrometry (LC/MS) was developed for the quantitative analysis of 23-hydroxybetulinic acid. Sample preparation consisted of extraction of the plasma by the addition of methylene chloride followed by centrifugation. Aliquots of the supernatant were analyzed using an isocratic reversed-phase high-performance liquid chromatography (HPLC) system coupled to a negative ion electrospray mass spectrometer. Molecules of 23-hydroxybetulinic acid and the internal standard limonin were detected using selected ion monitoring at m/z 471 and 469, respectively. The limit of detection of 23-hydroxybetulinic acid was 0.05 pg (0.11 fmol) injected on-column (10 pg/mL, 5 microL injection volume), and the limit of quantitation was 10 pg (21.19 fmol, 2 ng/mL, 5 muL injection volume). 23-Hydroxybetulinic acid was stable in plasma samples at -20 degrees C for at least 3 weeks. The intra-day and inter-day coefficients of variation of the assay were 3.0 and 4.8%, respectively. The utility of the assay was demonstrated by measuring 23-hydroxybetulinicacid in mouse plasma following intragastric administration (IG) in vivo. Pharmacokinetic parameters were calculated using the 3P97 pharmacokinetic software package. A two-compartment, first-order model was selected for pharmacokinetic modeling. The result showed that after IG of 200 mg/kg 23-hydroxybetulinic acid, the plasma concentrations reached peaks at 2 h with C(max) of 3.1 microg/mL. The 200 mg/kg 23-hydroxybetulinic acid suspension IG doses were found to have long elimination half-lives of 25.6 h and low bioavailability of 2.3%. No interference was noted due to endogenous substances. These analytical methods should be of value in future studies related to the development and characterization of 23-hydroxybetulinic acid.     

Enhancement of signal-to-noise level by synchronized dual wavelength modulation for light emitting diode fluorimetry in a liquid-core-waveguide microfluidic capillary electrophoresis system

The signal-to-noise level of light emitting diode (LED) fluorimetry using a liquid-core-waveguide (LCW)-based microfluidic capillary electrophoresis system was significantly enhanced using a synchronized dual wavelength modulation (SDWM) approach. A blue LED was used as excitation source and a red LED as reference source for background-noise compensation in a microfluidic capillary electrophoresis (CE) system. A Teflon AF-coated silica capillary served as both the separation channel and LCW for light transfer, and blue and red LEDs were used as excitation and reference sources, respectively, both radially illuminating the detection point of the separation channel. The two LEDs were synchronously modulated at the same frequency, but with 180°-phase shift, alternatingly driven by a same constant current source. The LCW transferred the fluorescence emission, as well as the excitation and reference lights that strayed through the optical system to a photomultiplier tube; a lock-in amplifier demodulated the combined signal, significantly reducing its noise level. To test the system, fluorescein isothiocyanate (FITC)-labeled amino acids were separated by capillary electrophoresis and detected by SDWM and single wavelength modulation, respectively. Five-fold improvement in S/N ratio was achieved by dual wavelength modulation, compared with single wavelength modulation; and over 100-fold improvement in S/N ratio was achieved compared with a similar LCW-CE system reported previously using non-modulated LED excitation. A detection limit (S/N = 3) of 10 nM FITC-labeled arginine was obtained in this work. The effects of modulation frequency on S/N level and on the rejection of noise caused by LED-driver current and detector were also studied.     

Synthesis of Functionalized o‐, m‐, and p‐Terphenyl Derivatives by Consecutive Cross‐Coupling Reactions of Triazene‐Substituted Arylboronic Esters

Triazene‐substituted arylboronic esters were prepared readily from the corresponding aryl magnesium derivatives and shown to function as a new class of donor–acceptor‐substituted coupling reagents. The selective functionalization of these aromatic derivatives led to a wide variety of terphenyl derivatives in which the original bifunctional unit (often further substituted with another functional group) formed the central aromatic ring. The functionalized terphenyl derivatives were formed in two efficient cross‐coupling steps from the triazene‐substituted boronic esters: Suzuki cross‐coupling with an aryl halide was followed by BF₃?OEt₂‐induced palladium‐catalyzed coupling of the diazonium salt generated in situ from the triazene with an arylboronic acid.     

橡胶接枝苯乙烯本体共聚合全程动力学研究(Ⅰ)--接枝行为

橡胶接枝苯乙烯本体聚合的研究目前主要集中于预聚阶段接枝动力学和聚合条件对相转变的影响[1]. 对于后聚阶段, 即相转变后的接枝行为, 尤其是接枝率与橡胶相内包容物的关系、接枝率与高转化率聚合动力学的关系, 接枝率与橡胶相结构的关系等则研究很少. 这些因素对最终聚合物的性能起着至关重要的作用, 因此, 研究橡胶接枝苯乙烯本体聚合相转变以后接枝率的变化, 并找出橡胶相形态演绎过程的规律很有意义.     

Studies on the interaction of colloidal gold and serum albumins by spectral methods

The interactions of colloidal gold and serum albumins, including bovine serum albumin (BSA) and human serum albumin (HSA), were studied by fluorescence and absorption spectrometry. Fluorescence quenching spectrometry was applied to study the interactions between colloidal gold and serum albumins. At pH 7.4 phosphate-buffered saline (PBS), the intensity of fluorescence emission spectrum of serum albumins decreased in the presence of colloidal gold, which indicated that colloidal gold quenched the fluorescence of serum albumins. Experimental results indicated that the combination reactions of colloidal gold and serum albumins were static quenching processes. Based on the effect of colloidal gold on fluorescence intensity, the binding constants, the numbers of binding sites and the acting forces between colloidal gold and serum albumins were found.     

Mutation scanning-coupled analysis of haplotypic variability in mitochondrial DNA regions reveals low gene flow between human and porcine Ascaris in endemic regions of China

Haplotypic variation within and among the Ascaris populations representing six provinces in China was investigated. Mitochondrial DNA regions in the cytochrome c oxidase subunit 1 (cox1) and NADH dehydrogenase subunit 1 (nad1) genes were amplified by PCR from total genomic DNA samples (n > 720) from Ascaris individuals from humans and pigs, and subjected to mutation scanning and subsequent selective sequencing. For the cox1, ten different electrophoretic profiles were recorded for human Ascaris, and the same number for pig Ascaris, one of them being common to both host species. For the nad1, 11 different profiles were detected for human Ascaris, and 15 for pig Ascaris. Having defined all haplotypes (20 for pcox1 and 26 for pnad1) by sequencing, their frequencies were estimated in each of the two host species and each of the six provinces. For each mitochondrial region, the frequency of the different haplotypes varied considerably, depending on host species and geographical origin. Analysis of the sequence data (representing all haplotypes for each mitochondrial locus) by F-statistics indicated restricted gene flow between human Ascaris and pig Ascaris, and supported the conclusions from previous molecular epidemiological investigations that pigs are not a significant source of Ascaris infection in humans in endemic regions.     

固相萃取搅拌棒萃取-气相色谱分析海水中的多环芳烃

利用固相萃取搅拌棒（SBSE）萃取海水中的多环芳烃，然后用热解吸脱附-气相色谱分析。研究了萃取时间、添加NaCl浓度对萃取效率的影响。实验结果表明，SBSE方法对16种多环芳烃的萃取回收率分别在33．5％～122．4％之间；对标准样品的检出限为2．74-13．5ng／L；方法RSD为3．8％～13．1％。用此方法测定了大连海岸海水中的多环芳烃含量。