On the copolymerization of acrylates in the modified microemulsion process

Copolymerization of methyl methacrylate, methyl acrylate, butyl methacrylate, and butyl acrylate in turn was performed in the modified microemulsion polymerization process, i.e., continuous addition of monomer to a preemulsified system. It was found that the particle size of the copolymer microlatex did not change distinctly with the monomer composition. The estimation of emulsifier coverage on the microlatex particles indicated that the process switched from a traditional microemulsion to a normal seeded emulsion polymerization very soon after monomer dropping began. Therefore, a longer dropping time is needed to produce a microlatex with narrow dispersed particle size. Besides, in the modified microemulsion polymerization less emulsifier is needed to produce a stable microlatex. This behavior is related to the mechanism of normal seeded emulsion polymerization during monomer dropping.     

Supported molybdena catalysts: Characterization of oxidized,reduced, and sulfided MoO3 prepared by an adsorption method

Highly dispersed molybdena-titania catalyst can be prepared by an equilibrium adsorption method. In this method, molybdate anions adsorb onto the positively charged titania surfaces via electrostatic attraction by controlling the pH of the impregnating solution and they increase as an inverse function of the pH. ⁹⁵Mo-NMR and UV spectroscopic studies of impregnating solution show that the polymeric species like Mo₇O₂₄ ⁶-ions are adsorbed on titania in the acidic impregnating solution. XRD, Raman, and XPS data of the calcined samples show that mono-layer coverage of molybdenum oxide over-layer possesses a highly distorted MoO₆ group with a molecular geometry resembling the distorted square pyramid. The catalytic oxidation of methanol over the surface molybdate species on titania possesses higher turnover numbers and higher selectivities of partial oxidation products than the catalysts supported on alumina, silica, zirconia, or magnesia. Changes of the surface properties either after reduction and sulfiding treatment over monolayer catalyst on titania have also been investigated. The NO chemisorption and XPS studies show that two types of active sites appeared after reduction treatment: one site is active for hydrogenation of 1,3-butadiene and the other site is active for metathesis of propene. A higher degree coordinative unsaturations of MO is required for hydrogenation than metathesis. After sulfiding treatments of the catalyst, hydrogenation of 1,3-butadiene also requires triply coordinative unsaturation, and hydrogenolysis of thiophene requires the ensemble of doubly or triply coordinative unsaturations.     

Diaqua­bis[2′‐(4,5‐diaza­fluoren‐9‐yl­idene)picolinohydrazidato‐κ2N,O]zinc(II) tetra­hydrate: a metal–water chain complex containing cyclic water hexa­mers

In the title compound, [Zn(C₁₇H₁₀N₅O)₂(H₂O)₂]·4H₂O, cyclic water hexa­mers forming one‐dimensional metal–water chains are observed. The water clusters are trapped by the co‐operative association of coordination inter­actions and hydrogen bonds. The Zn^II ion resides on a centre of symmetry and is in an octa­hedral coordination environment comprising two O atoms and two N atoms from two 2′‐(4,5‐diaza­fluoren‐9‐yl­idene)picolinohydrazidate ligands and two water mol­ecules.     

岩石的核磁共振自旋密度微成像

岩，心是油气储层的基本单元，其内部结构和渗流性质反映了油藏的基本特征．岩。心的精细描述是油藏描述、储层动态监测及设计强化采油方案的重要基础．本文利用核磁共振（NMR）自旋密度做成像，快速无损地观测到两类基本储油岩石——砂岩和灰岩的内部结构，提供了岩石渗透性、孔隙性及灰岩沉积环境等重要信息．1实验方法以自旋回波单片NMR成像脉冲序列为基础，设。P平面内样品的目施密度为P（。，v）．演化期t。，在。方向梯度场G。作用下，各处横向磁化矢量获得的相移为式中，7为共振核（在成像中一般为质子）的旋磁比，g为坐标位置·…     

Si-VPI-5分子筛的多核固体NMR研究

磷酸铝类分子筛是近年来继Y型和ZSM七分子筛之后的第三代合成分子筛材料，其骨架由A10。和P0。四面体均匀交替地组成问．由于带负电行的A10。和带正电荷的PO。四面体数目相等，整个骨架呈电中性，所以这类分子筛本身无离子交换能力和催化活性．当用硅或某些金属离子（如Mg、Fe、Co、Zn等）对磷酸铝分子筛进行同晶取代，就会在骨架上造成电行不平衡，从而使这类分子筛具有一定的离子交换能力和酸性【习．因而对硅或金属离子在磷酸错类分子筛中取代机理的研究一直是人们感兴趣的问题问．Vpl－5是最近才合成出来的具有18圆环一维孔结构的…     

Kinetic processes of Hg6s6p(P1) in xenon

The principal route for decay of Hg 6s6p(³P₁) in xenon is shown to be bimolecular deactivation to the mercury ground state, with rate coefficient 9.1 × 10⁻¹³ cm³ molecule⁻¹ s⁻¹; relaxation to the ³P₀ state plays a negligible role. The equilibrium constant of the reaction Hg(³P₁) + Xe HgXe(A ³O⁺), has been recorded as 1.73 × 10⁻²⁰ cm³ molecule⁻¹ at 293 K.     

Diffusion-induced Spatio-temporal Oscillations in an Epidemic Model with Two Delays

We investigate a diffusive, stage-structured epidemic model with the maturation delay and freelymoving delay. Choosing delays and diffusive rates as bifurcation parameters, the only possible way to destabilize the endemic equilibrium is through Hopf bifurcation. The normal forms of Hopf bifurcations on the center manifold are calculated, and explicit formulae determining the criticality of bifurcations are derived. There are two different kinds of stable oscillations near the first bifurcation: ...     

The potential-Ramsey number of Kn and K t −k

Czechoslovak Mathematical Journal - A nonincreasing sequence π = (d1,…, dn) of nonnegative integers is a graphic sequence if it is realizable by a simple graph G on n vertices. In this...     

Lamination Design Optimization for Continuous Fiber Reinforced Composites of Variable Thicknesses北大核心CSCD

由于具备高的比强度、比刚度,利用连续纤维增强复合材料代替传统金属材料以实现结构轻量化正受到设计者们的广泛关注。然而,结构的复杂性给复合材料的铺层设计与优化带来了很大的挑战。针对航空用复合材料铺层设计约束多的问题,通过逐步构建设计变量准确表达结构的铺层信息。基于经典遗传算法框架,结合各设计变量特点,定义了铺层优化算法中的遗传算子,通过引入“修复”策略保证了每一代解都能满足设计约束,分布在可行域区间内。最后利用精英保留策略提高了算法的局部寻优能力,可以降低复杂复合材料结构铺层设计的计算成本。通过解决经典benchmark问题并与已有优化结果的比较,验证了前述铺层优化算法的全局、局部寻优能力,为工程实际中的复合材料铺层设计优化提供了理论支撑。