地球章动原因的分析与计算

介绍地球章动的特点,从理论上分析地球章动的主要原因,计算章动常数并给出了地球章动示意图的画法.所计算的章动常数与观测值相差仅2/10 000.     

Lower Bounds on the (Laplacian) Spectral Radius of Weighted Graphs

The weighted graphs, where the edge weights are positive numbers, are considered. The authors obtain some lower bounds on the spectral radius and the Laplacian spectral radius of weighted graphs, and characterize the graphs for which the bounds are attained. Moreover, some known lower bounds on the spectral radius and the Laplacian spectral radius of unweighted graphs can be deduced from the bounds.     

Geometric Property （T）

This paper discusses“geometric property （T）”. This is a property of metric spaces introduced in earlier works of the authors for its applications to K-theory. Geometric property （T） is a strong form of “expansion property”, in particular, for a sequence （Xn） of bounded degree finite graphs, it is strictly stronger than （Xn） being an expander in the sense that the Cheeger constants h（Xn） are bounded below. In this paper, the authors show that geometric property （T） is a coarse invariant, i.e., it depends only on the large-scale geometry of a metric space X. The authors also discuss how geometric property （T） interacts with amenability, property （T） for groups, and coarse geometric notions of a-T-menability. In particular, it is shown that property （T） for a residually finite group is characterised by geometric property （T） for its finite quotients.     

齐性空间SU(2n)/Sp(n)的H-同伦指数

令p为大于3的素数.在一定维数限制下,通过把齐性空间SU(2n)/Sp(n)分解为若干个同伦可结合,同伦可交换的H-空间的乘积,进而得到了SU(2n)/Sp(n)的p素H-同伦指数的一个上界.     

新型镁合金螺钉体外腐蚀降解及细胞活性研究

研究了基于NZ30K合金开发的新型Mg-3Nd-0.2Zn-0.4Zr-0.2Mn镁合金耐腐蚀性、体外降解行为特性及浸提液细胞生物毒性. 采用金相显微镜得到新型镁合金金相显微图, 采用扫描电镜(Scanning Electron Microscope, SEM)获取SEM图; 采用武汉科思特电化学工作站进行电化学测试, 并绘制动电位极化曲线, 以磷酸盐缓冲液(Phosphate Buffer Solution, PBS)模拟体液环境, 记录氢气析出体积并计算腐蚀速率; 利用细胞完全培养基测定pH值、重量变化曲线; 获取大鼠骨髓间充质干细胞(Bone Mesenchymal Stem Cells, BMSCs), 并利用完全细胞培养基制作新型镁合金浸提液, 检测细胞生物活性, 以ZA75镁合金为基础添加0.3%Mn元素制成合金作为对照组, 比较腐蚀电位、体外降解情况以及细胞活性. 结果表明: 新型Mg-3Nd-0.2Zn-0.4Zr-0.2Mn镁合金横截面等轴晶体组织细小均匀性较好, 纵截面呈长条状组织均匀性稍差; 自腐蚀电位较高, 为-1.3912V; 自腐蚀电流密度较低, 为7.37×10-7 A?cm-2; 体外析氢量低, 失重量、pH值变化幅度相对较小; 降解速率下降后呈现小范围上升后趋于平缓; 具有良好的细胞相容性, 可以促进BMSCs细胞增殖分化.     

残余奥氏体含量对马氏体高强钢滑动磨损性能的影响

对3种不同残奥(RA)含量的马氏体高强钢进行干滑动摩擦磨损试验, 研究RA含量对其磨损性能的影响. 利用扫描电镜、透射电镜、X射线衍射仪等对试验后的磨损表面及横截面显微组织进行表征. 结果表明, RA含量越高, 磨损表面越光滑, 摩擦系数和磨损率越小, 也即马氏体高强钢的耐磨性越好. 磨损引起的大应变使RA发生应变诱导马氏体相变, 导致硬度和硬化层厚度显著增大. RA含量最高的HT3试样的硬度提高了18.3%, 硬化层厚度达70μm. 相比RA含量低的试样, HT3试样表现出很好的耐磨性. 这是因为马氏体相变使硬度逐步增加, 抗裂纹萌生能力提高; 同时由于亚表面良好的韧性, 可延缓和阻止裂纹扩展, 使得点蚀和剥落不易形成. 因此, 要提高马氏体高强钢的耐磨性, 除了硬度要求外, 还需要考虑其亚表面韧性.     

短视型创新企业最优定价研究

率先创新使企业拥有时间和产品竞争力上的优势,获得先动优势;而模仿创新减少企业的研发成本,更能满足顾客的需求,从而可以获得更高的成功率,使模仿创新企业获得后进优势.针对短视型创新企业行为,研究以原始创新产品进入市场、模仿创新产品进入市场、原始创新产品的升级换代产品进入市场为分隔点的产品生命周期不同阶段下率先创新企业对产品的最优定价,以及模仿创新企业采用不同价格策略下的产品均衡定价.结论表明:无论企业采用什么价格策略,升级换代产品进入市场的最优时间都应满足升级换代产品进入市场前创新企业的阶段末瞬时利润率与进入市场后的初始瞬时利润率相等.     

聚氯乙烯(PVC)管材中氯乙烯单体的溶解沉淀-顶空-气相色谱法测定

建立了聚氯乙烯(PVC)管材中氯乙烯单体的溶解沉淀-顶空-气相色谱法。选择HP-Wax毛细管柱为分离色谱柱,4mL含水量为37.5%(体积分数)的N,N-二甲基乙酰胺(DMA)溶液溶解PVC管材,在75℃平衡35min的条件下顶空进样进行气相色谱分析。结果显示,氯乙烯在0.025～2.50mg/L范围内线性关系良好,相关系数r=0.9993。以3倍信噪比计算,该方法的检出限为4.75μg/L。对样品加标测定6次,加标回收率为90%～96%,相对标准偏差(RSD)小于6.0%。该方法比常规的顶空进样方法的灵敏度提高了近9倍,具有操作简单、快速、灵敏度高、准确度和精密度好等优点,适合于PVC管材中氯乙烯单体的检测。     

Tensor force effect on proton shell structure in neutron-rich Ca isotopes

In the framework of the Skyrme-Hartree-Fock approach with 36 sets of the TI J parameterizations,the tensor force effect on the evolution of the single-proton states in the calcium isotopes is systematically investigated.It is shown that the single-proton states with higher angular momenta are influenced significantly by the tensor force and the trend in the evolution of somesingle-particle energy differences with the mass number of the isotopes depends sensitively on a parameter βT associated with the intensity of the tensor force.To understand this phenomenon,we analyze the spin-orbit potentials and the radial wave functions of relevant single-proton orbits in detail.In addition,it is found that some TI J interactions could cause the 2s1/21d3/2 energy level inversion in 48Ca.     

Sea trial researches on the measurements of passive source space distribution imaging and positioning

The technology of source space distribution imaging measurement is a passive object positioning method with high precision in the near field, which also can get the distribution image of ship＇s radiated noise sources and locate the ghts of the target. The sea trials have been carried out, and the results validate the feasibility and practicability of this tech-nology. The researches indicate that the measurement precision can be achieved at the meter level within the range of 200 m using the uniform linear array which has the length of 45 m and 10 elements, and the method shows good robustness. The results also provide that the general ship can be simplified as single highlight model at 2-10 kHz in the near field and the catamaran is double highlights while its two propellers are working at the same time.