Chemical Constituents from Cynoglossum gansuense

Two new alkaloids, i.e., (2,3‐dihydro‐1‐oxo‐1H‐pyrrolo[1,2‐a]pyrrol‐7‐yl)methyl (2S*,3S*)‐3‐[(β‐D ‐glucopyranosyl)oxy]‐2‐hydroxy‐2‐(1‐methylethyl)butanoate ( 1 ) and 1,2‐dihydro‐8‐methoxy‐2‐oxoquinoline‐4‐carboxylic acid ( 2 ), were isolated from the alcoholic extract of the whole plant of Cynoglossum gansuense, together with twelve known compounds Their structures were characterized by means of spectroscopic methods, especially by ¹H‐, ¹³C‐, and 2D‐NMR, as well as by HR‐MS experiments and comparison with literature data.     

孔壁部分有序化的介孔二氧化硅材料的合成与表征

采用一种“改进的二次晶化”的方法处理介孔二氧化硅SBA-15. 用X射线衍射(XRD)、 透射电镜(TEM)、 电子衍射(ED)、 红外光谱(FTIR)以及固体核磁共振(NMR)等多种技术对样品进行了表征.　结果表明， 在所得样品的孔壁中, 原子的排列方式与普通介孔二氧化硅材料的孔壁不同， 显示一定程度的有序性. 同时, 高度有序的介孔结构得到很好的保持, 且样品的水热稳定性大幅度提高.     

Light-emitting diode-induced fluorescence detection of native proteins in capillary electrophoresis

A continuous-wave 280 nm light-emitting diode (LED) was used as the excitation source for native fluorescence detection of proteins in CE. The operating current and temperature of the LED were optimized in order to achieve high luminescence power. It was found that a forward current of 30 mA and a temperature of approximately 5 degrees C gave the best S/N. By using a set of two ball lenses to focus light from the LED, we achieved a spot of approximately 200 mum with a power of 0.1-0.2 mW on the detection window. Fluorescence was collected with a ball lens at 90 degrees angle through a bandpass filter onto a photomultiplier tube. In CZE an LOD of 20 nM for conalbumin was reached. In capillary gel electrophoresis all eight proteins from a commercial standard kit were detected with high S/N. For a 10 microg/mL total protein mixture, S/N was better than 3 for all proteins in solution. Further improvement in LOD should be possible on utilization of an LED with higher luminescence power.     

A simple route towards tubular ZnO

Thermal treatment of Zn(NH3)(4)2+ precursor in ethanol solvent led to the formation of the tubular ZnO which exhibited strong ultraviolet photoluminescence around 385 nm at room temperature; TEM images showed the hollow tubules with approximately 450 nm in diameter and approximately 4 microns in length were built up by ZnO polycrystals.     

液相色谱-串联质谱法快速测定猪肝脏中恩拉霉素残留量

建立了快速测定猪肝脏中恩拉霉素残留量的液相色谱-串联质谱(LC-MS/MS)分析方法。猪肝脏样品用0.1 mol/L盐酸-乙腈(3∶7,体积比)提取2次,离心收集上清液后,加入乙酸乙酯和正己烷液液萃取净化提取液,离心分层后吸取下层提取液经0.1%甲酸稀释定容后进行LC-MS/MS分析。采用Acquity BEH C_(18)柱(100 mm×2.1 mm,1.7μm)进行色谱分离,以0.1%甲酸溶液-甲醇为流动相梯度洗脱;质谱采用电喷雾正离子(ESI~+)模式电离,多反应监测(MRM)模式采集数据,基质校准外标法定量。恩拉霉素A和恩拉霉素B基质标准溶液在2.0～500μg/L质量浓度范围内与定量离子对峰面积呈良好的线性关系,方法检出限分别为3.0、4.0μg/kg,定量下限分别为10、12μg/kg,空白猪肝脏的加标回收率为80.8%～90.3%,批内相对标准偏差(RSD)为0.90%～4.5%,批间RSD为3.0%～4.3%。与已建立的方法比较,该方法简单快速,准确度和精密度均较好,能满足动物组织中恩拉霉素残留量分析的需要。     

材料化学实验课程体系的改革与建设

结合材料化学实验课程自身的特点及材料化学实验教学的经验，系统阐述我院材料化学实验改革的思路，通过深化材料化学实验教学改革，提高任课教师的学术水平，更新教学内容，优化教学模式，推进教材的系统性建设，实现材料化学实验教学质量的提高，激发学生的学习热情与兴趣，进一步培养学生的创新能力。     

Ar原子电离能谱和Ar3p电子动量谱研究

电子动量谱学（ElectronMomentumSPectroscoP则是近．二十年来发展起来的一种新兴的探测原子、分子和固体结构的手段，它不仅能够获得轨道结合能的信息，而且能够能壳分辨地得到轨道电子的动量分布（即动量表象中的波函数模方）；同时它还是研究电子关联的最有效的实验手段．其     

反胶束法合成CdS纳米粒子及其表征

以AOT为保护剂,采用反胶束法合成CdS纳米粒子。利用水洗法洗去保护剂AOT,通过加入不同量的无水乙醇调节分散介质的极性,改变CdS纳米粒子在分散介质中的"溶解度",从而实现不同尺寸粒子的分离。采用紫外-可见(UV-vis)吸收光谱、透射电子显微镜(TEM)、荧光光谱法对其进行表征。     

Baker''''s yeast mediated reduction of substituted acenaphthenequinones: Regio-and enantioselective preparation of mono-hydroxyacenaphthenones

Baker's yeast mediated reduction of acenaphthenequinone within 4-10 h afforded mono-hydroxyacenaphthenone mainly with low enantioselectivity, the substrate and mono-hydroxyacenaphthenone product almost converted to dihydroxyacenaphthene after 48 h. By control of the reaction time and in the presence of DMF as co-solvent, the reduction of 6-substituted acenaphthenequinones under vigorous agitation afforded the corresponding 2-hydroxyacenaphthenones in 24-84% yields with 10-93% ee.     

Preparation and Characterization of Nano-ZnFe2O4/TiO2 Films

The nano-ZnFe2O4/TiO2 films possess the functions of desulfurization and degradation for organic pollutants. The sols of ZnFe2O4/TiO2 were prepared by sol-gel method and coated on glass and porous ceramic by vertical coating and dipping-lift processes, respectively, and the samples were obtained after drying and sintering. The composition, appearance, absorption spectrum of the films, and the influence of the film on porous ceramic performances were analyzed using SEM, AFM, UV-Vis spectrometer, and mercury porosimeter, respectively, to determine the operation parameters of the multifunction porous ceramic elements for gas-purification.