一种新的滤纸基质固体表面低温荧光(燐光)测定装置

对自行研制的铜制滤纸基质低温荧光（燐光）测定的样品支架，进行了滤纸基质固体表面低温荧光测定的可行性研究。与同类冷冻装置和室温装置比较，本装置用于滤纸基质固体表面低温荧光（燐光）测定具有以下优点；样品的分析周期大大地缩短，由45min缩短为5-6min；装置简单、便宜耐用；操作简便，简化了室温测定时的滤纸干燥程序，应用范围广，方法的重现性好，检样分析结果的相对标准偏差RSD%小于10%，荧光（燐光）分析灵敏度高，检出限低，线性范围宽。     

A phosphate-based epoxy resin for flame retardance: synthesis, characterization, and cure properties

A phosphorus-containing oligomer, bis(3-hydroxyphenyl) phenyl phosphate (BHPP), was synthesized through the reaction of phenyl dichlorophosphate and 1,3-dihydroxybenzene, and characterized by elemental analysis, Fourier transform IR spectroscopy, and ¹H NMR and ³¹P NMR spectroscopy. Consequently, the phosphate-based epoxy resins with a phosphorus content of 1 and 2 wt % were prepared via the reaction of diglycidyl ether of bisphenol-A with BHPP and bisphenol-A, and were confirmed with Fourier transform IR spectroscopy and gel permeation chromatography. Phenolic melamine, Novolak, and dicyanodiamide were used as curing agents to prepare the thermoset resins with the control and the phosphate-based epoxy resins. Thermal properties and thermal degradation behavior of these thermoset resins were investigated by using differential scanning calorimetry and thermogravimetric analysis. The thermoset resins cured with phenolic melamine exhibited higher glass-transition temperatures than the other cured resins owing to the high rigidity of their molecular chain. Thermogravimetric analysis studies demonstrated that the decomposition temperatures of the thermoset resins cured with Novolak were higher than those of the others. A synergistic effect from the combination of the phosphate-based epoxy resin and the nitrogen-containing curing agent can result in a great improvement of the flame retardance for their thermoset resins.     

旋转薄层色谱分离聚合物

报道了旋转薄层色谱分级聚合物，及配合直接扫描密度法测定分子量分布的结果．在旋转薄层硅胶板上用混合溶剂成功地分离并直接收集了聚苯乙烯２１个级分，分子量测定结果与ＧＰＣ法基本一致．初步认为旋转薄层色谱以薄层吸附色谱分离机理为基础，采用连续注入流动相和旋转薄层板离心力相结合的方式，改善并加快了分离效果     

Infrared and Raman spectra, conformational stability, ab initio calculations of structure, and vibrational assignment of 2-hexyne

The infrared spectra (3500–50 cm⁻¹) of the gas and solid and the Raman spectra (3500–50 cm⁻¹) of the liquid and solid have been recorded for 2-hexyne, CH₃–CC–CH₂CH₂CH₃. Variable temperature studies of the infrared spectrum (3500–400 cm⁻¹) of 2-hexyne dissolved in liquid krypton have also been recorded. Utilizing four anti/gauche conformer pairs, the anti(trans) conformer is found to be the lower energy form with an enthalpy difference of 74±8 cm⁻¹ (0.88±0.10 kJ/mol) determined from krypton solutions over the temperature range −105 to −150 °C. At room temperature it is estimated that there is 42% of the anti conformer present. Equilibrium geometries and energies of the two conformers have been determined by ab initio (HF and MP2) and hybrid DFT (B3LYP) methods using a number of basis sets. Only the HF and DFT methods predict the anti conformer as the more stable form as found experimentally. A vibrational assignment is proposed based on the force constants, relative intensities, depolarization ratios from the ab initio and DFT calculations and on rotational band contours obtained using the calculated equilibrium geometries. From calculated energies it is shown that the CH₃ group exhibits almost completely free rotation which is in agreement with the observation of sub-band structure for the degenerate methyl vibrations from which values of the Coriolis coupling constants, ζ, have been determined. The results are compared to similar properties of some corresponding molecules.     

耐超高温SiC(Al)纤维先驱体——聚铝碳硅烷纤维的研究

以聚硅碳硅烷(PSCS)与乙酰丙酮铝(Al(AcAc)3)为原料,在常压高温条件下反应制备出聚铝碳硅烷(PACS),经过熔融纺丝制备了PACS纤维.应用GPC、IR、XPS、29Si-NMR、27Al-NMR、TG、SEM、元素分析和增重等一系列分析,分别对PACS纤维的微观组成、结构以及性能进行了分析.研究结果表明,以原料质量配比为6∶100(Al(AcAc)3∶PSCS)合成的PACS化学式为SiC2.0H7.5O0.13Al0.018,数均分子量为1700左右,最适宜制备PACS纤维;PACS纤维中主要存在SiC4、SiC3H等结构,同时存在Si—O—Al键;在氮气气氛中,PACS纤维的陶瓷产率达到52%左右;预氧化处理,PACS纤维中Si—H键与空气中的氧反应形成Si—O—Si交联结构,较聚碳硅烷(PCS)纤维易于氧化,经过预氧化的PACS纤维陶瓷产率达到80%左右,是制备耐超高温SiC(Al)陶瓷纤维的合适纤维;用预氧化PACS纤维制备的SiC(OAl)纤维和SiC(Al)纤维抗拉强度高,耐高温性能好.     

Structure and microporous formation of cellulose/silk fibroin blend membranes: Part II. Effect of post-treatment by alkali

Blend membranes (RCF1) were prepared from mixture solution of cellulose and silk fibroin (SF) in cuoxam by coagulating with acetone–acetic acid (4:1 by volume). The blend membranes were subjected to post-treatment with 10% NaOH aqueous solution, and their structure and properties were characterized by FT-IR, X-ray diffraction, DSC, SEM and DMTA. In previous work, cellulose/SF blend membranes (RCF2) prepared by coagulating with 10% NaOH aqueous solution formed a microporous structure, in which the SF as a pore former was almost completely removed from the membrane. However, when the blend membranes RCF1 were immersed in 10% NaOH aqueous solution for post-treatment, a strong hydrogen bonding between cellulose and SF inhibited the removal of SF. Although alkali is a good solvent for SF, the blend membranes RCF1 such obtained from cellulose and SF were alkali resistant. The crystallinity and the mean pore size of the blend membranes slightly decreased with increasing post-treatment time. This work provided a cellulose/silk blend membrane, which can be used under alkaline medium.     

Stereochemical control of Zn(II)/Cu(II) selectivity in piperidine tripod ligands

Stereochemistry plays a major role in the selectivity toward zinc ion over copper(II) of some tripodal ligands with a central piperidine scaffold, one of which acts as a fluorescent zinc sensor with nanomolar sensitivity.     

Infrared (1.2-1.6 microm) luminescence in Cr4+:Yb3Al5O12 single crystal with 940 nm diode pumping

Infrared (1.2-1.6 microm) luminescence in a ytterbium aluminium garnet (YbAG) crystal, doped with Cr (0.05at.%) ions, was investigated under CW laser diode pumping (lambda=940 nm). The Cr4+ emission band was observed with its peak at 1.34 microm and measured to be about 1.3 times with respect to Yb3+ IR luminescence (lambda=1.03 microm). We demonstrate that for the excitation wavelength of 940 nm Yb3+ ions act as sensitizers of the 3B2(3T2)-3B1(3A2) emission of Cr4+ ions. This crystal is promising as a high-efficient system for tunable laser (1.2-1.6 microm) output.     

Synthesis and magnetic properties of the one-dimensional linear chain structure cyano-bridged complex [Cu(teta)(H2O)2][Cu(teta) Fe(CN)6]ClO4·2H2O (teta=5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacylotetradecane)

Reaction of either K₃[Fe(CN)₆] or K₄[Fe(CN)₆] with a macrocyclic Cu^II complex, [Cu(teta)](ClO₄)₂ (teta = 5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacylotetradecane), in aqueous solution gave the same product as shown by spectroscopic and physicochemical characterisation. The crystal structure of the complex shows that it is a one-dimensional linear chain type heterobinuclear Fe^III–Cu^II polymer. The unit is composed of a [Cu(teta)(H₂O)₂]²⁺ cationic complex, a Fe^III–Cu^II alternate linear chain unit, a ClO ₄ ^– ion and four water molecules. The Cu atom is coordinated in a distorted octahedral arrangement by four nitrogen atoms from one teta ligand and two nitrogen atoms of the bridging cyanide groups. The Cu—N bond distances involving the cyanide bridges, 2.522(7) and 2.608(7)Å, respectively, indicate weak antiferromagnetic interactions between the Fe^III and Cu^II atoms.     

Multiple Regulation Effects of Ammonium Acetate on ZnO Growth Process in Chemical Bath Deposition

Chemical bath deposition method has been used to synthesize a variety of ZnO morphology structures. However, the specificity and interaction of acetate and ammonium ions with ZnO crystal during the growth process remain elusive. This study contributes to understand the roles of ammonium acetate on the growth mechanism of ZnO in Zn(NO₃)₂-HMTA system. The growth process indicates that the nucleation experienced Zn²⁺-layered basic zinc salts (LBZs)-ZnO process, while the self-assembled unit changed from urchin-shaped, rod-shaped to a fully coupled twin-shaped structure with increasing ammonium acetate concentration. Ammonium acetate dominates the growth process by combing the ligand-ligand interaction of acetate ions binding to the same Zn-rich (0001) polar surface and ammonium ions regulating hexamethylenetetramine (HMTA) hydrolysis. Relatively regular hexagonal wurtzite structure and a dissolve-renucleation-regrowth process which retains the twin-shaped template and renucleates at the same position are observed at ∼10 mM ammonium acetate. Photoelectrochemistry (PEC) measurements show that the uniform hexagonal ZnO rods (Y-10, the sample named as Y-x (x represents x mM ammonium acetate, herein, x is 10 mM)) have a maximum photocurrent density of 1.54 mA cm⁻² at 1.23 V (vs. RHE), much higher than that of the dumbbell-shaped ZnO rods (Y-50, 0.20 mA cm⁻²) at the same voltage. These results provide a further explanation of morphology regulation mechanisms on ZnO synthesis processes and pave the road for more practical applications.