MORPHOLOGICAL STUDIES ON THERMOTROPIC LIQUID CRYSTALLINE POLYESTER——MORPHOLOGY OF SHEAR ORIENTED FILMS

The morphology of shear-oriented films of a thermotropic liquid crystalline polyester containing a triad ester mesogenic unit and a flexible spacer has been investigated in details. The formation conditions and process, the fine structures and the relaxation process of mat structure in the oriented films have been observed and discussed.     

逐步增长聚合的研究进展

逐步增长聚合应用面广,且聚合物分子量是逐步增加的,近来利用逐步增长聚合可以合成新型高分子材料日益引人注目。按照逐步增长聚合的不同类型,对近年来逐步增长聚合研究的新进展,特别是对合成聚酯等的缩聚反应,以及利用二异氰酸酯和Click反应的逐步加成聚合等进行了综述。为了进一步获得性能优良、分子量可控、结构理想且制备方法简便的高分子材料,加强逐步增长聚合理论研究、开发新型结构的单体,并充分开发相应的聚合新技术,是今后逐步增长聚合研究的重点。     

Take precautions against potential threats that carbon nanotubes may bring to you

Long-term pulmonary exposure to multi-walled carbon nanotubes (MWCNTs) may promote breast cancer metastasis and rapid colonization in the lungs and other organs according to recent research conducted by Prof.Chunying Chen,Prof.Tao Zhu and their colleagues,published in Nature Nanotechnology [1].     

Study on prediction of noise produced by stern wake-duct-propeller interaction

The mechanism and prediction methods of low-frequency discrete spectrmu noise of ducted propellers are studied. The acoustic pressure field of ducted propellers is divided into the propeller radiated field and the duct scattered field based on the linear acoustic theory. First of all, the flow field is analyzed with unsteady panel method to get the unsteady force, and then the pressure data are used as the sources for Ffowcs Williams-Hawings formulation to predict the propeller radiated field, meanwhile, the duct scattered field is obtained by Kirchoff integral equation. Through the analysis and calculation of a ducted propeller case, it is found that the duct scattered sound field is a small quantity compared with propeller radiated sound field under low-frequency and short duct condition; Also the predicted discrete spectrum noise level of ducted propellers is compared with that of full-scale propellers by experiment, verifying the predicted results are able to reflect the full-scale propellers＇ discrete spectrum noise level properly.     

高精度中小11径非球面修抛技术研究

为实现高精度中小口径非球面的加工，介绍了一种非球面修抛技术。基于Preston假设，将抛光过程描述成一个线性方程，计算得到材料的去除量与抛光时间、抛光压力和零件转速之间的函数关系。设计了整体修抛法和环带修抛法两种方法，在数控抛光的基础上，对口径为Ф117mm的凹抛物面和口径为Ф17mm凸双曲面进行修抛，修抛后非球面的面形精度PV值为0．184μm，RMS均小于0．032μm，达到了工程化应用要求，实现了中小口径非球面的高精度加工。     

“变色冰火球”趣味实验的设计过程与思考

用乙酸钙、酒精和酚酞设计成"变色冰火球"趣味实验。介绍了该实验的设计缘由以及实验的原理、操作方法等,并探讨了"冰火球"变色的一些原因。最后,对中学化学实验教学提出了几点思考。     

富锂层状正极材料Li2Mn1-xTixO3的合成及电化学性能

应用简单的高温固相烧结法合成了Ti掺杂改性的Li₂MnO₃材料。电子扫描显微镜、X射线衍射以及X射线光电子能谱分析表明Ti元素取代Mn离子掺入到Li₂MnO₃晶格中,且掺杂能有效地抑制一次颗粒的团聚。电化学阻抗和恒流充放电测试结果表明,在2.0~4.6 V的电压窗口下,掺杂改性的样品Li₂Mn_0.9Ti_0.03O₃的首圈放电比容量达到209 mAh·g^-1,库仑效率为99.5%,循环40圈后容量保持率为94%;当电流密度增大到400 mA·g^-1时,掺杂改性的样品仍然可以放出120 mAh·g^-1比容量,远高于同等电流密度下未掺杂的Li₂MnO₃原粉的比容量（52 mAh·g^-1）。Ti掺杂可有效地改善Li₂MnO₃的循环稳定性和倍率性能,有利于促进该材料的商业化应用。     

染料敏化太阳能电池对电极La2Mo2O7复合MWCNTs非Pt催化剂的制备与性能

通过高温固相法对醋酸镧（C₆H₉O₆La·xH₂O）与高钼酸铵（（NH₄）₆Mo₇O₂₄·4H₂O）在一定条件下热解制备非Pt催化剂La₂Mo₂O₇（La₂O₃-2MoO₂）。进一步采用2种方法将La₂Mo₂O₇与多壁碳纳米管（MWCNTs）进行复合,一种是将La₂Mo₂O₇喷涂到MWCNTs表层之上得到La₂Mo₂O₇/MWCNTs,另一种是将两者均匀混合掺杂得到La₂Mo₂O₇@MWCNTs,再将上述2种复合材料应用于染料敏化太阳能电池对电极进行相应研究。通过扫描电子显微镜（SEM）表征了复合催化材料的微观形貌,X射线衍射（XRD）确定了微观结构。采用电流密度-光电压曲线、循环伏安,交流阻抗以及塔菲尔极化分析了材料的光电性能。实验结果表明在电解液I₃^-/I^-中,基于La₂Mo₂O₇/MWCNTs与La₂Mo₂O₇@MWCNTs的对电极,相同的条件下在光电池中获得的光电转换效率分别为6.09%和4.84%,明显高于MWCNTs的3.94%和La₂Mo₂O₇的0.87%。电极性能的提高可归因于La₂Mo₂O₇复合催化剂相对大的比表面积和高导电性。     

含吡啶基配体的锌配合物的晶体结构和催化对硝基苯磷酸酯水解的活性研究

合成和表征了一种锌(Ⅱ)配合物[Zn₂(L)Cl₃]₂[ZnCl₄]·CH₃CN·CH₃OH·3H₂O(L=1,1,4,7,7-五(2-吡啶甲基)-二乙基三胺),并用对硝基苯磷酸酯(PNPP)作为反应底物测试了它的催化活性。研究结果表明配合物中的1个Zn(Ⅱ)形成变形的八面体构型,另1个Zn(Ⅱ)形成变形的三角双锥构型。它催化PNPP的水解符合米氏方程模型。在不同的条件下测试了几种反应动力学参数V_max、K_m和K_cat,发现锌(Ⅱ)配合物在30 ℃和pH=8.0时有最大的催化活性。