Critical exponents for nonlinear diffusion equations with nonlinear boundary sources

This paper is concerned with the large time behavior of solutions to two types of nonlinear diffusion equations with nonlinear boundary sources on the exterior domain of the unit ball. We are interested in the critical global exponent q₀ and the critical Fujita exponent qc for the problems considered, and show that q₀=qc for the multi-dimensional porous medium equation and non-Newtonian filtration equation with nonlinear boundary sources. This is quite different from the known results that q₀<qc for the one-dimensional case.     

Synthesis and Characterization of Ti-ZSM-5 in a Non-alkaline Medium in the Presence of Fluoride Ions

Ti-ZSM-5 was synthesized by hydro thermal crystallization in the presence of fluoride via using a non-alkaline medium. pH values were 5~7. SEM showed perfect Ti-ZSM-5 crystals and a large single crystal growing from the favourable medium. Substitution of titanium for silicon in the ZSM-5 framework led to a decrease of crystal size and of the length/width ratio. Electron microprobe analysis indicated a homogeneous distribution of titanium in the ZSM-5 framework. The unit cell parameters of the Ti-ZSM-5 determined by XRD increased with an increase in titanium content in the framework. TiO4tetrahedron vibrations were found in the IR spectrum. Si(1Ti) peakwas seen in the 29Si MAS NMR spectrum at -1O1ppm(from TMS) and 13CMAS NMR analysis verified the effect of (C3H7)4N F- occluded in thechannels. XPS study on the precursors, calcined and H2O2 adsorbed Ti-ZSM-5 was performed and some interesting results were observed.     

Crown‐like macrocycle zinc complex derived from β‐diketone ligand for the polymerization of rac‐lactide

Enolic Schiff base zinc (II) complex 1 was synthesized. XRD revealed 1 was a novel crown‐like macrocycle structure consisted of hexanuclear units of (LZnEt)₆ via the coordination chelation between the Zn atom and adjacent amine nitrogen atom. Further reaction of 1 with one equivalent 2‐propanol at RT produced Zn‐alkoxide 2 by in situ alcoholysis. Complex 2 was used as an initiator to polymerize rac‐lactide in a controlled manner to give heterotactic enriched polylactide. Factors that influenced the polymerization such as the polymerization time and the temperature as well as the monomer concentration were discussed in detail in this paper. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 643–649, 2008     

Mesoporous material grafted with luminescent molecules for the design of selective metal ion chemosensor

Luminescent Schiff-base groups have been successfully grafted on the surface of mesoporous material MCM-48. The grafted Schiff-base groups were employed to prepare luminescent Schiff-base-Zn complex that was covalently bound to the MCM-48 surface. These luminescent mesoporous materials were characterized with X-ray, UV-VIS and emission spectroscopic methods. Experimental results demonstrated that MCM-48 modified with functional groups exhibited novel luminescent property. The chemosensing property of modified MCM-48 sample was investigated. It was demonstrated that the fluorescence of MCM-48 solid with Schiff-base groups could be completely quenched by Cu²⁺ cation and this mesoporous material was suitable for sensing Cu²⁺ cation in aqueous media.     

LES study of diesel flame/wall interaction and mixing mechanisms at different wall distances

In this paper, the flame-wall interaction of reacting diesel spray under engine like conditions is investigated using large eddy simulations. The aim of this study is to understand the influence of the distance between the wall and the spray nozzle on the air entrainment rate, which is a key variable in formation/oxidation process of soot. Three experimental cases are investigated, a free jet case and two wall impingement cases with a distance from nozzle to wall of 30 mm and 50 mm, which are considered as characteristic wall impingement distances for light- and heavy-duty bores in diesel engines, respectively. The optical soot measurements imply a positive influence of wall on the rate of soot oxidation. Numerical simulations are employed to elucidate importance of different mechanisms for the air entrainment, i.e., air entrainment prior to flame lift-off position, enhanced mixing due to the wall impingement and enhanced mixing by the entrainment wave. The results show that oxidation process after the end of injection is driven by a different mixing mechanism depending on the distance to the wall. The 30 mm case resulted in a “mixing boost”, where the dominant mixing mechanism is the wall impingement vortex mixing, which gives rise to the fastest soot decay among the cases. The mixing in the 50 mm case is governed by a late wall impingement vortex mixing, giving rise to a low, but a constant air entrainment rate, i.e., a “mixing plateau”. The free jet case resulted in mixing governed by the entrainment wave mechanism. Both wall impingement cases have faster soot oxidation rate compared with the free jet case, but due to a different underlying mixing process. LES is shown to be able to replicate the line-of-sight measurements of natural OH* chemiluminescence and distribution of soot region from the optical soot diagnostics.     

Oxy-coal combustion in a 30 kWth pressurized fluidized bed: Effect of combustion pressure on combustion performance,pollutant emissions and desulfurization

Oxy-coal combustion with pressurized fluidized beds has recently emerged as a promising carbon capture and storage (CCS) technology for coal-fired power plants. Although a large number of energy efficiency analyses have shown that an increase in combustion pressure can further increase the net plant efficiency, there are few experimental studies of pressurized oxy-coal combustion conducted on fluidized bed combustors/boilers with continuous coal feeding. In this study, oxy-coal combustion experiments with lignite and anthracite were conducted with a 30 kW_th pressurized fluidized bed combustor within the pressure range of 0.1 MPa to 0.4 MPa. The investigation focused on the elucidation of the impacts of combustion pressure on the combustion performance, pollutant emissions and desulfurization of oxy-coal combustion in fluidized beds. The results showed that an increase in pressure increased the combustion efficiency and combustion rate of coal particles, and the promoting effect of pressure increase was more significant for the high rank coal with smaller particle size and the high O₂ concentration atmosphere. For both coals, NO_x emissions decreased with pressure but N₂O emissions increased with pressure and accounted for a considerable part of the nitrogen oxide pollutants under high pressure oxy-coal combustion conditions. The pressure had insignificant impact on the SO₂ emissions of oxy-coal combustion but an increase in pressure enhanced the direct desulfurization of limestone.     

Impact of Extracellular Polymeric Substance in the Inactivation of Harmful Algae by Ag2O/g-C3N4 under Visible Light

Photocatalysis has attracted much attention as an emerging algae removal technology, but the inactivation performance is inevitably affected by the extracellular polymeric substance (EPS) produced by algae. In this study, a photocatalyst (Ag₂O/g-C₃N₄) with efficient algae inactivation is adopted to investigate the interactions with EPS, and the impact of EPS on photocatalytic algae removal is studied. The results show that EPS can adhere to the surface of Ag₂O/g-C₃N₄ by electrostatic force. The interaction with EPS decreases the surface zeta potential of the Ag₂O/g-C₃N₄ from 7.71 to −22.3 mV with the increase in EPS concentration, and the maximum ratio of particle size increases from 825 to 1281 nm. In addition, the interaction with EPS inhibits the release of Ag⁺ in Ag₂O/g-C₃N₄ by half, thus, the toxicity of metal ions will be alleviated. Meanwhile, EPS can also be degraded by Ag₂O/g-C₃N₄, indicating that EPS can work as a radical scavenger to protect the algae cells. Without the protection of EPS, 97.8% of algae cells are inactivated after 5 h photocatalysis. Therefore, more attention should be given to the interaction between EPS and photocatalyst to promote the design and application of the photocatalytic.     

Cr、Mn、Co、Ni掺杂对Al13Fe4相稳定性和力学性能影响的第一性原理研

采用基于密度泛函理论的第一性原理计算方法,系统地研究了不同掺杂浓度下过渡族元素Cr、Mn、Co、Ni在Al13Fe4相中的占位情况、结构稳定性和机械性能. 计算得到所有的Al13(Fe24-xMx) (M=Cr、Mn、Co、Ni;X=1,2,4)相都具有良好的热力学稳定性和机械稳定性. 相同掺杂浓度化合物的形成焓按如下顺序减小：Al78(Fe24-xCrx) > Al78(Fe24-xMnx) > Al13Fe4 > Al78(Fe24-xNix) > Al78(Fe24-xCox).形成焓的降低增加了Al13Fe4相成核驱动力,Co和Ni有利于促进Al-Fe合金中Al13Fe4相形核,细化Al13Fe4相. 过渡族元素可以改善金属间化合物的脆性,增强塑性变形能力. 并且随着掺杂浓度的增加,过渡族元素的加入对脆性的改善呈先增大后减小的趋势.     

超疏水表面液滴的振动特性及其与液滴体积的关系

超疏水表面液滴的振动特性与接触线的移动、液滴体积、基底振幅等因素密切相关.本文在基底振幅较小且恒定的条件下,研究了超疏水表面液滴的共振振幅、模式区间、共振频率等振动特性及其与液滴体积(20—500μL)的关系.此外,将基于一般性疏水表面建立的Noblin共振频率计算模型应用于超疏水表面,并提出“虚驻点”的概念,借此对模型进行了误差分析和修正.研究表明:1)共振时,液滴高度变化率即比振幅随体积增大而增大,随阶数增大而减小;2)各模式区间的起止频率首尾相接,其范围随体积增大而减小;3)液滴体积越大,共振频率越小,随着阶数增大,共振频率f与体积V的关系趋于f-V^–0.4,不同于一般性疏水表面上的f-V^–0.5;4)直接应用Noblin模型计算共振频率会产生较大误差,主要原因在于液滴表面波波段数量统计存在较大偏差,而修正后的模型可以准确计算超疏水表面大体积液滴的共振频率.