(CuBr)3P4Se4: A Low Symmetric Variant of the (CuI)3P4Se4 Structure Type

Bright orange (CuBr)₃P₄Se₄ is obtained from the reaction of CuBr, P, and Se in stoichiometric amounts (CuBr : P : Se = 3 : 4 : 4). The composition and the crystal structure of the compound were determined from single crystal X‐ray diffraction data. Lattice constants are a = 33.627(2) Å, b = 6.402(1) Å, c = 19.059(1) Å, β = 90.19(3) °, V = 4103.2(3) ų, and Z = 12. The compound crystallizes in a structure that is related to (CuI)₃P₄Se₄. Cages of β‐P₄Se₄ are stacked along the b‐axis and are separated by columns of copper(I) bromide. However, the coordination of the β‐P₄Se₄ cage molecules to the copper atoms in the CuBr columns in (CuBr)₃P₄Se₄ is quite different from (CuI)₃P₄Se₄. The monoclinic compound (space group: P2₁, no. 4) has an almost orthorhombic metric in combination with a threefold superstructure in [100]. Structural aspects of (CuBr)₃P₄Se₄ are discussed with respect to the heavier homologue (CuI)₃P₄Se₄.     

Estimation of second order rate constants using chemometric methods with kinetic constraints

Several methods are described for determining rate constants for second order reactions of the form U + V --> W using chemometrics and hard modelling to analyse UV absorption spectroscopic data, where all species absorb with comparable concentrations and extinctions. An interesting feature of this type of reaction is that the number of steps in the reaction is less than the number of absorbing species, resulting in a rank-deficient response matrix. This can cause problems when using some of the methods described in the literature. The approaches discussed in the paper depend, in part, on what knowledge is available about the system, including the spectra of the reactants and product, the initial concentrations and the exact kinetics. Sometimes some of this information may not be available or may be hard to estimate. Five groups of methods are discussed, namely use of multiple linear regression to obtain concentration profiles and fit kinetics information, rank augmentation using multiple batch runs, difference spectra based approaches, mixed spectral approaches which treat the reaction as two independent pseudospecies, and principal components regression. Two datasets are simulated, one where the spectra are quite different and the other where the spectrum of one reactant and the product share a high degree of overlap. Three sources of error are considered, namely sampling error, instrumental noise and errors in initial concentrations. The relative merits of each method are discussed.     

Evaluation of automated nano-electrospray mass spectrometry in the determination of non-covalent protein-ligand complexes

The use of electrospray ionization mass spectrometry (ESI-MS) for studying non-covalent interactions between macromolecules and ligands is well established. ESI-MS can be a useful tool for the determination of dissociation constants between molecules in the gas phase. We validate this method by studying the binding of the catalytic domain of cellobiohydrolase I (CBH I) from Trichoderma reesei to the disaccharide inhibitor cellobiose. The method was further applied to study two newly synthesized cellobiose derivatives (m-iodobenzyl 2-deoxy-2-azido-beta-cellobioside and p-benzyloxybenzyl beta-cellobioside). In a titration experiment, peak areas of different charge states of the free enzyme and the complex were summed in order to determine the dissociation constant. For cellobiose and m-iodobenzyl 2-deoxy-2-azido-beta-cellobioside, the calculated values are in good agreement with those reported from either displacement titration or equilibrium binding experiments in solution. Due to non-specific binding, the dissociation constant of p-benzyloxybenzyl beta-cellobioside does not correspond with the solution-based value. Our results indicate the need for careful interpretation of data sets when using nanoESI to study non-covalent interactions.     

Aggregation patterns in alpha,alpha'-stabilized carbanions: assembly of a sodium cage polymer by slip-stacking of dimers

The alpha,alpha'-stabilized carbanion complexes [PhSO(2)CHCNNa.THF], 3, [t-BuSO(2)CHCNNa], 4, [PhSO(2)CHCNK], 5, [t-BuSO(2)CHCNK], 6, and [MeSO(2)CHCNLi.TMEDA], 7, have been synthesized via the metalation of the parent (organo)sulfonylacetonitriles by BuLi, BuNa, or BnK in THF solution (or THF/TMEDA in the case of 7). In addition, complexes 3 and 7 have been characterized by single-crystal X-ray analyses and have been found to adopt related structures in the solid state. Complex 7 is a molecular dimer containing a central 12-membered (OSCCNLi)(2) ring core, with each metal rendered tetracoordinate by binding to a chelating TMEDA molecule. As found in related complexes, no direct carbanion to lithium contacts are present in the structure of 7. Complex 3 forms a polymeric cage structure composed of associated "dimeric" (OSCCNNa)(2) rings, similar to those found in 7. The larger sodium cations, and the presence of only one THF molecule/metal, allow additional contacts with the anions, leading to hexacoordination at the metal centers. These contacts include long-range transannular Na-N interactions (2.8042(14) A) across the central dimeric ring and "interdimer" Na-C connections (2.8718(15) A). Dissolution of complexes 3-6 and their lithiated derivatives [PhSO(2)CHCNLi.TMEDA], 1, and [t-BuSO(2)CHCNLi.THF], 2, in DMSO-d(6) results in almost identical chemical shifts for each type of ligand. This suggests that charge-separated complexes of the form [RSO(2)CHCN](-)[M(DMSO-d(6))(n)()](+) are formed in highly polar solution.     

Exploring the optimal site for modifications of pyranmycins with the extended arm approach

[reaction: see text] Continuing from the syntheses and the antibacterial studies of a library of pyranmycins, we further probed the proximity around ring III of pyranmycin by introducing an "extended arm" that has hydroxyethyl or aminoethyl groups at the O-2' ', O-3' ', or O-4' ' positions. The results from the antibacterial studies reveal the optimal structural motif is the attachment of an extended arm with a terminal hydroxyl group at the O-3' ' position.     

Ca(2.5)Sr(0.5)GaMn2O8: diamagnetic Ga in control of the structural and electronic properties of a bilayered manganate

The temperature dependence of the crystal structure and electronic properties of brownmillerite-like Ca(2.5)Sr(0.5)GaMn(2)O(8) has been studied by neutron powder diffraction and muSR spectroscopy. The results show that short-range 2D magnetic order begins to develop within the perovskite-like bilayers of MnO(6) octahedra approximately 50 K above the 3D Néel temperature of approximately 150 K. The bilayers show a structural response to the onset of magnetism throughout this temperature range whereas the GaO(4) layers that separate the bilayers only respond below the 3D ordering temperature. XANES spectroscopy shows that the sample contains Mn(3+) and Mn(4+) cations in a 1:1 ratio, and the behavior in the region of the Néel transition is interpreted as a local charge ordering. Electron diffraction and high-resolution electron microscopy have been used to show that the local microstructure is more complex than the average structure revealed by neutron diffraction, and that microdomains exist in which the GaO(4) tetrahedra show different orientations. It is argued that the bonding requirements of diamagnetic gallium control the electronic behavior within the perovskite-like bilayers.     

Super/subcritical fluid chromatography chiral separations with macrocyclic glycopeptide stationary phases

The chiral recognition capabilities of three macrocyclic glycopeptide chiral selectors, namely teicoplanin (Chirobiotic T), its aglycone (Chirobiotic TAG) and ristocetin (Chirobiotic R), were evaluated with supercritical and subcritical fluid mobile phases. A set of 111 chiral compounds including heterocycles, analgesics (nonsteroidal antiinflamatory compounds), beta-blockers, sulfoxides, N-protected amino acids and native amino acids was separated on the three chiral stationary phases (CSPs). All separations were done with an outlet pressure regulated at 100 bar, 31 degrees C and at 4 ml/min. Various amounts of methanol ranging from 7 to 67% (v/v) were added to the carbon dioxide along with small amounts (0.1 to 0.5%, v/v) of triethylamine and/or trifluoroacetic acid. The Chirobiotic TAG CSP was the most effective closely followed by the Chirobiotic T column. Both columns were able to separate, partially or fully, 92% of the enantiomers of the compound set. The ristocetin chiral selector could partially or baseline resolve only 60% of the enantiomers tested. All separations were done in less than 15 min and 70% were done in less than 4 min. The speed of the separations is the main advantage of the use of SFC compared to normal-phase HPLC. In addition, SFC is advantageous for preparative separations with easy solute recovery and solvent disposal.     

Comments on “Cofino statistics”

Cofino et al. have put forward a method for the analysis of data from interlaboratory studies. The method uses ideas and notation from quantum chemistry, and is quite sophisticated. A critical examination shows that it has some relationship with both kernel density estimation and robust estimation methods. The quantitative results it provides are not founded on any statistical probability model, and it is not at all clear how the variance in particular is to be interpreted. There is no clear argument for adopting Cofino statistics in preference to simple problem-free methods that are at least as effective in estimating a concensus value.This report was prepared for the Statistical Subcommittee by Professor T. Fearn, with the assistance of Mr T. Robinson, and approved by the AMC on 25/11/03. The Statistical Subcommittee comprised: Dr. S.L.R. Ellison, Professor T. Fearn, Mr M. Gardner, Dr. F. Hollywood, Professor R.J. Howarth, Dr. P. Lowthian, Professor J.N. Miller, Dr. E.J. Newman, Professor B.D. Ripley, Professor M. Thompson (Chair), Dr. R. Wood, Dr. A. Williams and Mr J.J. Wilson (Secretary).     

One-pot two-step microwave-assisted reaction in constructing 4,5-disubstituted pyrazolopyrimidines

[reaction: see text] A microwave-assisted reaction was developed to facilitate the construction of 4,5-disubstituted pyrazolopyrimidines. This one-pot two-step process involves a sequential S(N)Ar displacement of the C4 chloro substituent with various anilines and amines, followed by a Suzuki coupling reaction with different boronic acids. Using microwave irradiation leads to high product conversion, low side product formation, and shorter reactions.     

Cationic polymerization with boron halides. V. Synthesis of poly(isobutylene-b-styrene) and poly(styrene-b-isobutylene)

Block copolymers of isobutylene and styrene, PIB-b-PSt and PSt-b-PIB, have been prepared by a two-step synthesis involving (1) preparation of terminally chlorinated (telechelic) polyisobutylene or polystyrene “prepolymers” by using the H₂O/BCl₃ initiator system and (2) blocking from these telechelic prepolymers a second polymer segment by using an alkyaluminum, e.g., Et₂AlCl coinitiator. The telechelic polyisobutylene and polystyrene contain tertiary and benzylic chlorine termini, respectively. Block copolymer characterization included detailed selective solvent extraction procedures, coupled with GPC determinations, PMR, solubility, and intrinsic viscosity studies. The synthesis of PIB-b-PSt and PSt-b-PIB provides direct chemical evidence for the presence and position of active chlorine termini in BCl₃-coinitiated olefin polymerizations.