Synthesis of mono- and geminal dimetalated carbanions of bis(phenylsulfonyl)methane using alkali metal bases and structural comparisons with lithiated bis(phenylsulfonyl)imides

The alpha,alpha'-stabilized carbanion complexes [(PhSO2)2CHLi.THF]1, [(PhSO2)2CHNa.THF]2 and [(PhSO2)2CHK]3 were prepared by the direct deprotonation of bis(phenylsulfonyl)methane I in THF with one molar equivalent of MeLi, BuNa and BnK respectively. The geminal dianionic complexes [(PhSO2)2CLi2.THF]4, [(PhSO2)2CNa2.0.55THF]5 and [(PhSO2)2CK2]6 were similarly prepared by the reaction of I with two molar equivalents of MeLi, BuNa and BnK respectively in THF. NMR and MS solution studies of 1-3 are consistent with the formation of charge-separated species in DMSO media. Solutions studies of 4-6, in conjunction with trapping experiments, indicate that the dianions deprotonate DMSO and regenerate the monoanions 1-3. Crystallographic analysis of 1 revealed a 1D chain polymer in which the metal centers are chelated by the bis(sulfonyl) ligands and connect to neighboring units through Li-O(S) interactions. An unexpected feature of 1 is that the polymeric chains are homochiral, since the chelating ligands of the backbone adopt the same relative configuration. Also, the phenyl substituents of each chelate in 1 are oriented in a cisoid manner. The sodium derivative 2 adopts a related solid-state structure, where enantiomeric pairs of chains combine to give a 1D ribbon motif. The lithium bis(phenylsulfonyl)imides [(PhSO2)2NLi.THF]9 and [(PhSO2)2NLi.Pyr2]10 were also prepared and structurally characterized. In the solid state 9 has a similar connectivity to that found for 1 but with heterochiral chains. In comparison, the more highly solvated complex 10 forms a 1D polymeric arrangement without chelation of the ligands and with the phenyl substituents oriented in a transoid fashion.     

Lutetium alkyl and hydride complexes in a non-cyclopentadienyl coordination environment

Lutetium alkyl complexes [Lu(L)(CH(2)SiMe(3))(THF)(n)], which contain a sulfur-linked bis(phenolato) ligand such as 2,2'-thiobis(6-tert-butyl-4-methylphenolate) (L=tbmp, 1) or 1,4-dithiabutanediyl-bis(6-tert-butyl-4-methylphenolate) (L=etbmp, 2), were isolated from the reaction of the lutetium tris(alkyl) complex [Lu(CH(2)SiMe(3))(3)(THF)(2)] with H(2)L. The monomeric structures of these complexes were confirmed by X-ray diffraction studies, showing distorted octahedral geometry around the metal centre. The reaction of [Lu(tbmp)(CH(2)SiMe(3))(THF)(2)] (1) with alcohols ROH (R=iPr, CHPh(2), CPh(3)) results in the formation of the corresponding alkoxide complexes [Lu(tbmp)(OR)(THF)(n)] (4-6). With PhSiH(3) hydride complexes [Lu(L)(mu-H)(THF)(n)](2) (L=tbmp, 7; etbmp, 8) have been prepared in moderate to good yields. They adopt a dimeric form in the solid state as revealed by the X-ray crystal structure of 7. The reactivity of the hydride complexes and their catalytic activity in the ring-opening polymerisation of L-lactide and the hydrosilylation of alkenes are also discussed.     

Synthesis and structural characterisation of lithium and sodium 2,6-dibenzylphenolate complexes

The stoichiometric treatment of 2,6-dibenzylphenol (HOdbp) or 2,2"-dimethoxy-2,6-dibenzylphenol (HOdbpOMe) with n-butyllithium or sodium bis(trimethylsilyl)amide (the latter as a solution in THF) in Et2O or DME affords the dimeric alkali metal phenolates [{M(Odbp)(L)}2] (M = Li; L = Et2O (1), L = DME (2), M = Na; L = Et2O (5), L = DME (6)), [{Li(OdbpOMe)}2] (3) and [{M(OdbpOMe)(L)}2] (M = Li; L = DME (4), M = Na; L = THF (7), L = DME (8)). Complexes 3 and 7 exhibit -OdbpOMe methoxy coordination and all four sodium complexes (5-8) display pi-aryl contacts from one phenolate radial arm to each sodium centre. The attempted synthesis of {Na(odbp)}n by direct sodiation of HOdbp yields a small quantity of the 2-benzylphenolate [{Na(Ombp)(DME)}4] (9) (-Ombp = -OC6H4-2-CH2Ph), providing a rare example of benzyl C-C bond scission.     

Structural diversity in solvated lithium aryloxides. Syntheses, characterization, and structures of [Li(OAr)(THF)x]n and [Li(OAr)(py)x]2 complexes where OAr = OC6H5, OC6H4(2-Me), OC6H3(2,6-(Me))2, OC6H4(2-Pr(i)), OC6H3(2,6-Pr(i)))2, OC6h4(2-Bu(t)), OC6H3(2,6-Bu(t)))2

A series of sterically varied aryl alcohols H-OAr [OAr = OC6H5 (OPh), OC6H4(2-Me) (oMP), OC6H3(2,6-(Me))2 (DMP), OC6H4(2-Pr(i)) (oPP), OC6H3(2,6-(Pr(i)))2 (DIP), OC6H4(2-Bu(t)) (oBP), OC6H3(2,6-(Bu(t)))2 (DBP); Me = CH3, Pr(i) = CHMe2, and Bu(t) = CMe3] were reacted with LiN(SiMe3)2 in a Lewis basic solvent [tetrahydrofuran (THF) or pyridine (py)] to generate the appropriate "Li(OAr)(solv)x". In the presence of THF, the OPh derivative was previously identified as the hexagonal prismatic complex [Li(OPh)(THF)]6; however, the structure isolated from the above route proved to be the tetranuclear species [Li(OPh)(THF)]4 (1). The other "Li(OAr)(THF)x" products isolated were characterized by single-crystal X-ray diffraction as [Li(OAr)(THF)]4 [OAr = oMP (2), DMP (3), oPP (4)], [Li(DIP)(THF)]3 (5), [Li(oBP)(THF)2]2, (6), and [Li(DBP)(THF)]2, (7). The tetranuclear species (1-4) consist of symmetric cubes of alternating tetrahedral Li and pyramidal O atoms, with terminal THF solvent molecules bound to each metal center. The trinuclear species 5 consists of a six-membered ring of alternating trigonal planar Li and bridging O atoms, with one THF solvent molecule bound to each metal center. Compound 6 possesses two Li atoms that adopt tetrahedral geometries involving two bridging oBP and two terminal THF ligands. The structure of 7 was identical to the previously reported [Li(DBP)(THF)]2 species, but different unit cell parameters were observed. Compound 7 varies from 6 in that only one solvent molecule is bound to each Li metal center of 7 because of the steric bulk of the DBP ligand. In contrast to the structurally diverse THF adducts, when py was used as the solvent, the appropriate "Li(OAr)(py)x" complexes were isolated as [Li(OAr)(py)2]2 (OAr = OPh (8), oMP (9), DMP (10), oPP (11), DIP (12), oBP (13)) and [Li(DBP)(py)]2 (14). Compounds 8-13 adopt a dinuclear, edge-shared tetrahedral complex. For 14, because of the steric crowding of the DBP ligand, only one py is coordinated, yielding a dinuclear fused trigonal planar arrangement. Two additional structure types were also characterized for the DIP ligand: [Li(DIP)(H-DIP)(py)]2 (12b) and [Li2(DIP)2(py)3] (12c). Multinuclear (6,7Li and 13C) solid-state MAS NMR spectroscopic studies indicate that the bulk powder possesses several Li environments for "transitional ligands" of the THF complexes; however, the py adducts possess only one Li environment, which is consistent with the solid-state structures. Solution NMR studies indicate that "transitional" compounds of the THF precursors display multiple species in solution whereas the py adducts display only one lithium environment.     

Uranium(IV) complexes of calix[n]arenes (n = 4, 6 and 8)

Reaction of UCl4 with calix[n]arenes (n = 4, 6 and 8) in THF or pyridine gave the mononuclear [UCl2(calix[4]arene--2H)(THF)2], bis-binuclear [U2Cl2(calix[6]arene--6H)(THF)3]2 and trinuclear [Hpy]6[U3Cl11(calix[8]arene--7H)] complexes, respectively, which are the first U(IV) complexes of O-unsubstituted calixarenes.     

Novel lanthanide(II) complexes supported by carbon-bridged biphenolate ligands: synthesis, structure and catalytic activity

[Ln[N(SiMe3)2]2(THF)2](Ln = Sm, Yb) reacts with 1 equiv. of carbon-bridged biphenols, 2,2'-methylene-bis(6-tert-butyl-4-methylphenol)(L1H2) or 2,2'-ethylidene-bis(4,6-di-tert-butylphenol)(L2H2), in toluene to give the novel aryloxide lanthanide(II) complexes [[LnL1(THF)n]2](Ln = Sm, n = 3 (1); Ln = Yb, n = 2 (2)) and [[LnL2(THF)3]2](Ln = Sm (5); Ln = Yb (6)) in quantitative yield, respectively. Addition of 2 equiv. of hexamethylphosphoric triamide (HMPA) to a tetrahydrofuran (THF) solution of 1, 2 and 5 affords the corresponding HMPA-coordinated complexes, [[LnL1(THF)m(HMPA)n]2(THF)y](Ln = Sm, n = 2, m = 0, y = 2 (3); Ln = Yb, m = 1, n = 1, y = 6 (4)) and [[SmL2(HMPA)2]2](7) in excellent yields. The single-crystal structural analyses of 3, 4 and 7 revealed that these aryloxide lanthanide(II) complexes are dimeric with two Ln-O bridges. The coordination geometry of each lanthanide metal can be best described as a distorted trigonal bipyramid. Complexes 1-3, 5 and 7 can catalyze the ring-opening polymerization of epsilon-caprolactone (epsilon-CL), and 1-3, along with 5 show moderate activity for the ring-opening polymerization of 2,2-dimethyltrimethylene carbonate (DTC) and the copolymerization of epsilon-CL and DTC to give random copolymers with high molecular weights and relatively narrow molecular weight distributions..     

First complexes of scandium and yttrium with NNO and NNS heteroscorpionate ligands

The reaction of ScCl(3)(THF)(3) or YCl(3) in a 1:1 molar ratio under reflux for 8 h with [{Li(bdmpza)(H(2)O)}(4)] [bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetate], [{Li(bdmpzdta)(H(2)O)}(4)] [bdmpzdta = bis(3,5-dimethylpyrazol-1-yl)dithioacetate], and (Hbdmpze) [bdmpze = 2,2-bis(3,5-dimethylpyrazol-1-yl)ethoxide] affords the corresponding complexes [MCl(2)(kappa(3)-bdmpzx)(THF)] (x = a, M = Sc (1), Y (2); x = dta, M = Sc (3), Y (4); x = e, M = Sc (5), Y (6)). However, when the reaction was carried out for 1 h under reflux between ScCl(3)(THF)(3) and [{Li(bdmpzdta)(H(2)O)}(4)], a new anionic complex [Li(THF)(4)][ScCl(3)(kappa(3)-bdmpzdta)] (7) was obtained. Reaction of [{Li(bdmpza)(H(2)O)}(4)] with YCl(3) in a 2:1 molar ratio under reflux for 8 h gave the complex [YCl(kappa(3)-bdmpza)(2)] (8). The same reaction, but with the lithium compound [{Li(bdmpzdta)(H(2)O)}(4)], led to the formation of an anionic complex [Li(THF)(4)][YCl(3)(kappa(3)-bdmpzdta)] (9). The X-ray crystal structures of 7 and 9 were established. Finally, the addition of 1 equiv of [{Li(bdmpza)(H(2)O)}(4)] or [{Li(bdmpzdta)(H(2)O)}(4)] to a solution of YCl(3) in THF under reflux, followed by the addition of 1 equiv of 1,10-phenanthroline, resulted in the formation of the corresponding complexes [YCl(2)(kappa(3)-bdmpzx)(phen)] (x = a (10), x = dta (11)). These complexes are the first examples of group 3 metals stabilized by heteroscorpionate ligands. In addition, we have explored the reactivity of some of these complexes with alcohols and amides. For example, the direct reaction of [YCl(2)(kappa(3)-bdmpza)(THF)] (2) with several alcohols gave the alkoxide complexes [YCl(kappa(3)-bdmpza)(OR)] (R = Et (12), iPr (13)). Finally, the reaction between [ScCl(2)(kappa(3)-bdmpzdta)(THF)] (3) or [Li(THF)(4)][ScCl(3)(kappa(3)-bdmpzdta)] (7) and LiN(SiMe(3))(2).Et(2)O in 1:1 and 1:2 molar ratios gave rise to the complexes [ScCl(kappa(3)-bdmpzdta){N(SiMe(3))(2)}] (14) and [Sc(kappa(3)-bdmpzdta){N(SiMe(3))(2)}(2)] (15), respectively.     

Mixed guanidinato/alkylimido/azido tungsten(VI) complexes: synthesis and structural characterization

A series of structurally characterized new examples of pentacoordinated heteroleptic tungsten(VI)-guanidinates complexes are described. Starting out from [WCl(2)(Nt-Bu)(2)py(2)] (1) (py = pyridine) and the guanidinato transfer reagents (TMEDA)Li[(Ni-Pr)(2)CNi-Pr(2)] (2a) (TMEDA = N,N,N',N'-tetramethylethylendiamine) and [Li(NC(NMe(2))(2))](x) (2b), the title compounds [WCl(Nt-Bu)(2)[(Ni-Pr)(2)CNi-Pr(2)]] (3) and [W(Nt-Bu)(2)Cl{NC(NMe(2))(2)]](2) (6) were selectively formed by the elimination of one mole equivalent of lithium chloride. The isopropyl-substituted guanidinato ligand [(Ni-Pr)(2)CNi-Pr(2)} of monomeric 3 is N(1),N(3)-bonded to the tungsten center. The introduction of the sterically less-demanding tetramethyl guanidinato ligand [NC(NMe(2))(2)] expectedly leads to dimeric 6 exhibiting a planar W(2)N(2) ring with the guanidinato group bridging the two tungsten centers via the deprotonated imino N-atom. The remaining chloro ligand of 3 is labile and can be substituted by sterically less-crowded groups such as dimethylamido or azido that yield the presumably monomeric compounds 4 and 5, respectively. A similar treatment of 6 with sodium azide yields the dimeric azido derivative 7. Reacting [WCl(2)(Nt-Bu)(2)py(2)] directly with an excess of sodium azide leads to the dimeric bis-azide species [[W(Nt-Bu)(2)(N(3))(mu(2)-N(3))py](2)]. The new compounds were fully characterized by single-crystal X-ray diffractometry (except 2, 4, and 5), NMR, IR, and mass-spectroscopy as well as elemental analysis. Compound 5, [W(N(3))(Nt-Bu)(2)[(Ni-Pr)(2)CNi-Pr(2)]], can be sublimed at 80 degrees C, 1 Pa.     

Carbon-bridged bis(phenolato)lanthanide alkoxides: syntheses, structures, and their application in the controlled polymerization of epsilon-caprolactone

A convenient method for the synthesis of lanthanide alkoxo complexes supported by a carbon-bridged bis(phenolate) ligand 2,2'-methylenebis(6-tert-butyl-4-methylphenoxo) (MBMP2-) is described. The reaction of (C5H5)3Nd with MBMPH2 in a 1:1 molar ratio in THF gave the bis(phenolato)lanthanide complex (C5H5)Nd(MBMP)(THF)2 (1) in a nearly quantitative yield. Complex 1 further reacted with 1 equiv of 2-propanol in THF to yield the bis(phenolato)lanthanide isopropoxide [(MBMP)2Nd(mu-OPr(i))(THF)2]2 (2) in high yield. Complex 2 can also be synthesized by the direct reaction of (C5H5)3Nd with MBMPH2 in a 1:1 molar ratio and then with 1 equiv of 2-propanol in situ in THF. Thus, the analogue bis(phenolato)lanthanide alkoxides [(MBMP)2Ln(mu-OR)(THF)2]2 [R = Pr(i), Ln = Yb (3); R = Me, Ln = Nd (4), Yb (5); R = CH2Ph, Ln = Nd (6), Yb (7)] were obtained by the reactions of (C5H5)3Ln (Ln = Nd, Yb) with MBMPH2 and then with 2-propanol, methanol, or benzyl alcohol, respectively. The ytterbium complex {[(MBMP)2Yb(THF)2]2(mu-OCH2Ph)(mu-OH)} (8) was also isolated as a byproduct. The single-crystal structural analyses of complexes 1-3 and 8 revealed that the coordination geometry around lanthanide metal can be best described as a distorted tetrahedron in complex 1 and as a distorted octahedron in complexes 2, 3, and 8. A O-H...Yb agostic interaction was observed in complex 8. Complexes 2-7 were shown to be efficient catalysts for the controlled polymerization of epsilon-caprolactone.     

Iron-arylimide clusters [Fe(m)()(NAr)(n)Cl(4)](2)(-) (m,n = 2, 2; 3, 4; 4, 4) from a ferric amide precursor: synthesis,characterization, and comparison to Fe-S chemistry

Tetrahedral FeCl[N(SiMe(3))(2)](2)(THF) (2), prepared from FeCl(3) and 2 equiv of Na[N(SiMe(3))(2)] in THF, is a useful ferric starting material for the synthesis of weak-field iron-imide (Fe-NR) clusters. Protonolysis of 2 with aniline yields azobenzene and [Fe(2)(mu-Cl)(3)(THF)(6)](2)[Fe(3)(mu-NPh)(4)Cl(4)] (3), a salt composed of two diferrous monocations and a trinuclear dianion with a formal 2 Fe(III)/1 Fe(IV) oxidation state. Treatment of 2 with LiCl, which gives the adduct [FeCl(2)(N(SiMe(3))(2))(2)](-) (isolated as the [Li(TMEDA)(2)](+) salt), suppresses arylamine oxidation/iron reduction chemistry during protonolysis. Thus, under appropriate conditions, the reaction of 1:1 2/LiCl with arylamine provides a practical route to the following Fe-NR clusters: [Li(2)(THF)(7)][Fe(3)(mu-NPh)(4)Cl(4)] (5a), which contains the same Fe-NR cluster found in 3; [Li(THF)(4)](2)[Fe(3)(mu-N-p-Tol)(4)Cl(4)] (5b); [Li(DME)(3)](2)[Fe(2)(mu-NPh)(2)Cl(4)] (6a); [Li(2)(THF)(7)][Fe(2)(mu-NMes)(2)Cl(4)] (6c). [Li(DME)(3)](2)[Fe(4)(mu(3)-NPh)(4)Cl(4)] (7), a trace product in the synthesis of 5a and 6a, forms readily as the sole Fe-NR complex upon reduction of these lower nuclearity clusters. Products were characterized by X-ray crystallographic analysis, by electronic absorption, (1)H NMR, and M?ssbauer spectroscopies, and by cyclic voltammetry. The structures of the Fe-NR complexes derive from tetrahedral iron centers, edge-fused by imide bridges into linear arrays (5a,b; 6a,c) or the condensed heterocubane geometry (7), and are homologous to fundamental iron-sulfur (Fe-S) cluster motifs. The analogy to Fe-S chemistry also encompasses parallels between Fe-mediated redox transformations of nitrogen and sulfur ligands and reductive core conversions of linear dinuclear and trinuclear clusters to heterocubane species and is reinforced by other recent examples of iron- and cobalt-imide cluster chemistry. The correspondence of nitrogen and sulfur chemistry at iron is intriguing in the context of speculative Fe-mediated mechanisms for biological nitrogen fixation.     

Rational design of molecular sheets composed of interconnecting eight- and twenty-four-membered rings: use of lithiated aggregates to control network assembly

The lithiated (organo)sulfonylacetonitrile complex [MeSO(2)CHCNLi.THF] (3) has been prepared and structurally characterized in order to demonstrate that well-known molecular aggregates of s-block metals may be used as building blocks in the controlled assembly of complex supramolecular architectures. The solid state structure of 3 can be described as a novel basket-weaved, 2-D network, composed of (SO(2)Li)(2) "dimeric" rings joined via "interdimer" donation of nitrile units.     

Synthesis, characterization and reactivity of heteroleptic rare earth metal bis(phenolate) complexes

The synthesis, characterization and reactivity of heteroleptic rare earth metal complexes supported by the carbon-bridged bis(phenolate) ligand 2,2'-methylene-bis(6-tert-butyl-4-methyl-phenoxo) (MBMP(2-)) are described. Reaction of (C(5)H(5))(3)Ln(THF) with MBMPH(2) in a 1 : 1.5 molar ratio in THF at 50 degrees C produced the heteroleptic rare earth metal bis(phenolate) complexes (C(5)H(5))Ln(MBMP)(THF)(n) (Ln = La, n = 3 (); Ln = Yb (), Y (), n = 2) in nearly quantitative yields. The residual C(5)H(5)(-) groups in complexes to can be substituted by the bridged bis(phenolate) ligands at elevated temperature to give the neutral rare earth metal bis(phenolate) complexes, and the ionic radii have a profound effect on the structures of the final products. Complex reacted with MBMPH(2) in a 1 : 0.5 molar ratio in toluene at 80 degrees C to produce a dinuclear complex (MBMP)La(THF)(mu-MBMP)(2)La(THF)(2) () in good isolated yield; whereas complexes and reacted with MBMPH(2) under the same conditions to give (MBMP)Ln(MBMPH)(THF)(2) (Ln = Yb (), Y ()) as the final products, in which one hydroxyl group of the phenol is coordinated to the rare earth metal in a neutral fashion. The reactivity of complexes and with some metal alkyls was explored. Reaction of complex with 1 equiv. of AlEt(3) in toluene at room temperature afforded unexpected ligand redistributed products, and a discrete ion pair ytterbium complex [(MBMP)Yb(THF)(2)(DME)][(MBMP)(2)Yb(THF)(2)] () was isolated in moderate yield. Furthermore, reaction of complex with 1 equiv. of ZnEt(2) in toluene gave a ligand redistributed complex [(mu-MBMP)Zn(THF)](2) () in reasonable isolated yield. Similar reaction of complex with ZnEt(2) also afforded complex ; whereas the reaction of complex with 1 equiv. of n-BuLi in THF afforded the heterodimetallic complex [(THF)Yb(MBMP)(2)Li(THF)(2)] (). All of these complexes were well characterized by elemental analyses, IR spectra, and single-crystal structure determination, in the cases of complexes , and -.     

Electronic response of a (P,N)-based ligand on metal coordination

The reaction of [(THF)Li(Ph(2)PC(H)Py)] with ZnCl(2) in the presence of ZnO yields the zinc complex [Zn(3)(Ph(2)PC(H)Py)(4)O] (1). Deprotonation of the phosphane Ph(2)P(CH(2)Py) with [Fe(N(SiMe(3))(2))2] gives the iron complexes [(Ph(2)P(CH(2)Py))Fe(Ph(2)PC(H)Py)2] (2) and [Fe(Ph(2)PC(H)Py)(N(SiMe(3))(2))]2 (3), depending on the ratio of phosphane. The solid state structures of the metal complexes illustrate the coordination flexibility of the [Ph(2)C(H)Py](-)-anion. Depending on the electronic requirements of the coordinated metal the anion acts as a (P,N)-chelating amide or C-coordinating carbanion with the P- and N-heteroatoms as donor bases.     

Triamidotriazacyclononane complexes of group 3 metals. Synthesis and crystal structures

Reaction of yttrium and lanthanide trichlorides (Ln = La, Eu, Yb) with 1 equiv of the trisodium salt of 1,4,7-tris(dimethylsilylaniline)-1,4,7-triazacyclononane (Na(3)[(SiMe(2)NPh)(3)-tacn](THF)(2)) gives good yields of the compounds [M[(SiMe(2)NPh)(3)-tacn]] (M = Y (1), Eu (3), Yb (4)) and [La[(SiMe(2)NPh)(3)-tacn](THF)] (2). Reduction of 3 with Na/Hg followed by recrystallization in the presence of diglyme yielded crystals of [Eu[(SiMe(2)NPh)(3)-tacn]][Na(diglyme)(2)] (5). Synthesis of the uranium(III) complex [U[(SiMe(2)NPh)(3)-tacn]] (6) is achieved by reaction of 1 equiv of Na(3)[(SiMe(2)NPh)(3)-tacn](THF)(2) with uranium triiodide. The U(IV) complexes, [U[(SiMe(2)NPh)(3)-tacn]X] (X = Cl (7); I (8)), were prepared via oxidation of 6 with benzyl chloride or I(2), but salt metathesis from UCl(4) provided a higher yield route for 7. The solid-state structures of 1-7 were determined by single-crystal X-ray diffraction. The ligand [(SiMe(2)NPh)(3)-tacn] generates a trigonal prismatic coordination environment for the metal center in the neutral complexes 1, 3, 4, and 6 and the ionic 5. In 2 the six nitrogen atoms of the ligand are in a trigonal prismatic configuration with the oxygen atom of the THF capping one of the triangular faces of the trigonal prism. In 7 the coordination geometry around the uranium atom is best described as bicapped trigonal bipyramidal.     

Coordinatively Unsaturated Derivatives of Group 6 Metal Carbonyls Containing the pi-Donating Ligand 3,5-Di-tert-butylcatecholate

The series of group 6 metal tricarbonyl derivatives of di-tert-butylcatecholate have been synthesized from the reactions of M(CO)(5)THF (M = Cr, Mo, W) with 2 equiv of [Et(4)N][3,5-(t)Bu(2)OC(6)H(2)OH]. Subsequent removal of the free catechol was achieved by the addition of NaOMe. The complexes were shown by X-ray crystallography to exhibit coordinatively unsaturated M degrees centers. These metal dianions which have formally 16e(-) configurations are stabilized by pi-donation from the oxygen atoms of the catecholate ligand. This is evident from the short M-O bond distances, e.g., for M = W, 2.059(6) ? vs 2.151(4) ? for a single bond. The structures of these five-coordinate dianions can be loosely defined as trigonal bipyramidal with the more electron-rich oxygen donor of the catecholate (ortho to the electron-releasing tert-butyl substituent) occupying an equatorial site as indicated by a shorter M-O bond length. The tungsten derivative was shown to reversibly react with CO or phosphines to afford the 18e(-), saturated complexes. Although the molybdenum tricarbonyl derivative reacts with CO to partially provide the tetracarbonyl complex, the analogous process involving chromium did not occur. That is, the formation of an O-->M pi bond vs an additional M-CO bond is favored for M = chromium. Complex 2, [Et(4)N](2)[W(CO)(4)DTBCat], crystallizes in the monoclinic space group P2(1)/c with a = 10.013(5) ?, b = 43.921(14) ?, c = 9.113(4) ?, beta = 115.76(3) degrees, V = 3609(3) ?(3), and d(calc) = 1.429 g/cm(3), for Z = 4. Complex 4, [Et(4)N](2)[Mo(CO)(3)DTBCat], crystallized in the monoclinic space group C2 with a = 18.255(7) ?, b = 8.596(3) ?, c = 22.369(7) ?, beta = 91.05(6) degrees, V = 3510(2) ?(3), and d(calc) = 1.251 g/cm(3), for Z = 4. Similarly, complex 5, [Et(4)N](2)[Cr(CO)(3)DTBCat], crystallized in the monoclinic space group C2 with a = 18.09(2) ?, b = 8.553(3) ?, c = 21.927(11) ?, beta = 91.09(8) degrees, V = 3393(4) ?(3), and d(calc) = 1.208 g/cm(3), for Z = 4.     

Neutral zinc, lower-order zincate and higher-order zincate derivatives of pyrrole: synthesis and structural characterisation of zinc complexes with one, two, three or four pyrrolyl ligands

Towards a systematic development of the zinc chemistry of the important five-membered nitrogen heterocycle pyrrole, this work reports the synthesis and characterisation of five crystalline zinc-pyrrolyl complexes. Pyrrolyl in this context means where conversion of the N-H bond to an N-zinc bond has occurred. Two neutral complexes, [(t)BuZn(NC(4)H(4))(TMEDA)·HNC(4)H(4)] 1 and [Zn(NC(4)H(4))(2)(TMEDA)] 2, containing one and two pyrrolyl ligands, respectively, were synthesised by reacting di-t-butylzinc with different amounts of pyrrole in the presence of TMEDA (TMEDA is N,N,N',N'-tetramethylethylenediamine). X-ray crystallographic studies established that both adopt mononuclear structures with the salient feature of the former the presence of an additional parent protonated pyrrole molecule which engages its anionic counterpart in N-H…πC-C interactions. Employing a similar synthetic approach but adding n-butylsodium to the reaction mixture in attempts to form ate derivatives delivered three distinct sodium zincate (anionic zinc) compounds in [{(THF)(2)·NaZn(THF)(NC(4)H(4))(3)}(∞)] 3, [{(TMEDA)·Na}(2)Zn(NC(4)H(4))(4)] 4, and [{(PMDETA)·Na}(2)Zn(NC(4)H(4))(4)] 5 (PMDETA is N,N,N',N',N'-pentamethyldiethylenetriamine). From their crystal structures, the 1?:?1, Na:Zn complex 3 can be classified as a lower-order zincate having three pyrrolyl ligands bound to zinc in a polymeric chain arrangement, while the 2?:?1, Na:Zn complexes 4 and 5 are molecular higher-order zincates having Zn centres fully saturated by four pyrrolyl ligands. Discussion of the structures of 1-5 focuses on the interplay of σ-bonding and π-bonding between the pyrrolyl ligands and the metal centres. Revealingly, the zinc-free sodiopyrrole complex [{(PMDETA)·Na(NC(4)H(4))}(2)] 6, made and characterised for comparison, shows that on its own sodium prefers the former type of bonding, but is forced to switch to the latter type when combined with the stronger Lewis acid zinc in the zincate compositions. Complexes 1-6 have also been characterised in solution by NMR spectroscopy.     

Syntheses, X-ray structures and AACVD studies of group 11 ditelluroimidodiphosphinate complexes

Reactions of Na(tmeda)[N((i)Pr(2)PTe)(2)] with CuCl, AgI or AuCl (in the presence of PPh(3)) in THF produced the coinage metal ditelluroimidodiphosphinate complexes {Cu[N((i)Pr(2)PTe)(2)]}(3), (5), {Ag[N((i)Pr(2)PTe)(2)]}(6) (6) and Au(PPh(3))[N((i)Pr(2)PTe)(2)] (7), respectively. Complexes 5, 6 and 7 were characterized in the solid state by X-ray crystallography. Complex 5 is trimeric and exhibits a highly distorted Cu(3)Te(3) ring. In contrast, the Ag(I) complex 6 is a hexamer, and forms a twelve-membered Ag(6)Te(6) ring. The replacement of the (i)Pr groups on phosphorus by Ph results in an intriguing structural change to a tetramer with a boat-shaped Ag(4)Te(4) ring in {Ag[N(Ph(2)PTe)(2)}(4).2THF (8). The gold(I) complex 7 is monomeric. Aerosol-assisted chemical vapour deposition (AACVD) of compounds 5, 6 and 7 yields CuTe, Ag(7)Te(4), AuTe(2) and Au films, respectively. The films were grown at temperatures of 300-500 degrees C and characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive analysis of X-rays (EDAX).     

Divalent lanthanide complexes supported by the bridged bis(amidinates) L Me3SiN(Ph)CN(CH2)3NC(Ph)NSiMe3]: synthesis, molecular structures and one-electron-transfer reactions

Metathesis reactions of YbI(2) with Li(2)L (L = Me(3)SiN(Ph)CN(CH(2))(3)NC(Ph)NSiMe(3)) in THF at a molar ratio of 1:1 and 1:2 both afforded the Yb(II) iodide complex [{YbI(DME)(2)}(2)(μ(2)-L)] (1), which was structurally characterized to be a dinuclear Yb(II) complex with a bridged L ligand. Treatment of EuI(2) with Li(2)L did not afford the analogous [{EuI(DME)(2)}(2)(μ(2)-L)], or another isolable Eu(II) complex, but the hexanuclear heterobimetallic cluster [{Li(DME)(3)}(+)](2)[{(EuI)(2)(μ(2)-I)(2)(μ(3)-L)(2)(Li)(4)}(μ(6)-O)](2-) (2) was isolated as a byproduct in a trace yield. The rational synthesis of cluster 2 could be realized by the reaction of EuI(2) with Li(2)L and H(2)O in a molar ratio of 1:1.5:0.5. The reduction reaction of LLnCl(THF)(2) (Ln = Yb and Eu) with Na/K alloy in THF gave the corresponding Ln(II) complexes [Yb(3)(μ(2)-L)(3)] (3) and [Eu(μ(2)-L)(THF)](2) (4) in good yields. An X-ray crystal structure analysis revealed that each L in complex 3 might adopt a chelating ligand bonding to one Yb atom and each Yb atom coordinates to an additional amidinate group of the other L and acts as a bridging link to assemble a macrocyclic structure. Complex 4 is a dimer in which the two monomers [Eu(μ(2)-L)(THF)] are connected by two μ(2)-amidinate groups from the two L ligands. Complex 3 reacted with CyN═C═NCy and diazabutadienes [2,6-(i)Pr(2)C(6)H(3)N═CRCR═NC(6)H(3)(i)Pr(2)-2,6] (R═H, CH(3)) (DAD) as a one-electron reducing agent to afford the corresponding Yb(III) derivatives: the complex with an oxalamidinate ligand [LYb{(NCy)(2)CC(NCy)(2)}YbL] (5) and the complexes containing a diazabutadiene radical anion [LYb((i)Pr(2)C(6)H(3)NCRCRNC(6)H(3)(i)Pr(2))] (R = H (6), R = CH(3) (7)). Complexes 5-7 were confirmed by an X-ray structure determination.     

Half-sandwich o-N,N-dimethylaminobenzyl complexes over the full size range of group 3 and lanthanide metals. synthesis, structural characterization, and catalysis of phosphine P--H bond addition to carbodiimides

The acid-base reactions between the rare-earth metal (Ln) tris(ortho-N,N-dimethylaminobenzyl) complexes [Ln(CH2C(H4NMe2-o)3] with one equivalent of the silylene-linked cyclopentadiene-amine ligand (C5Me4H)SiMe2NH(C6H2Me3-2,4,6) afforded the corresponding half-sandwich aminobenzyl complexes [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}Ln(CH2C6H4NMe2-o)(thf)] (2-Ln) (Ln=Y, La, Pr, Nd, Sm, Gd, Lu) in 60-87 % isolated yields. The one-pot reaction between ScCl(3) and [Me2Si(C5Me4)(NC6H2Me3-2,4,6)]Li2 followed by reaction with LiCH2C6H4NMe2-o in THF gave the scandium analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}Sc(CH2C6H4NMe2-o)] (2-Sc) in 67 % isolated yield. 2-Sc could not be prepared by the acid-base reaction between [Sc(CH2C6H4NMe2-o)3] and (C5Me4H)SiMe2NH(C6H2Me3-2,4,6). These half-sandwich rare-earth metal aminobenzyl complexes can serve as efficient catalyst precursors for the catalytic addition of various phosphine P--H bonds to carbodiimides to form a series of phosphaguanidine derivatives with excellent tolerability to aromatic carbon-halogen bonds. A significant increase in the catalytic activity was observed, as a result of an increase in the metal size with a general trend of La>Pr, Nd>Sm>Gd>Lu>Sc. The reaction of 2-La with 1 equiv of Ph2PH yielded the corresponding phosphide complex [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La(PPh2)(thf)2] (4), which, on recrystallization from benzene, gave the dimeric analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La(PPh2)]2 (5). Addition of 4 or 5 to iPrN=C=NiPr in THF yielded the phosphaguanidinate complex [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La{iPrNC(PPh2)NiPr}(thf)] (6), which, on recrystallization from ether, afforded the ether-coordinated structurally characterizable analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La{iPrNC(PPh2)NiPr}(OEt2)] (7). The reaction of 6 or 7 with Ph2PH in THF yielded 4 and the phosphaguanidine iPrN=C(PPh2)NHiPr (3a). These results suggest that the catalytic formation of a phosphaguanidine compound proceeds through the nucleophilic addition of a phosphide species, which is formed by the acid-base reaction between a rare-earth metal o-dimethylaminobenzyl bond and a phosphine P--H bond, to a carbodiimide, followed by the protonolysis of the resultant phosphaguanidinate species by a phosphine P--H bond. Almost all of the rare earth complexes reported this paper were structurally characterized by X-ray diffraction studies.     

Amido-based potassium-alkaline earth metallates--synthesis and structures of heterobimetallic complexes of heavy s-block elements

The metathesis reaction of potassium N-isopropylanilide with alkaline earth metal diiodides of calcium, strontium and barium in a molar ratio of 4:1 yields the corresponding alkaline earth metalates of the type [(THF)(n)K(μ-NPhiPr)(2)Ae(μ-NPhiPr)(2)K(THF)(n)] (1: Ae = Ca, n = 2). Stabilization and crystallization of such derivatives succeeds after exchange of the THF ligands by multidentate amino bases such as tetramethylethylenediamine (TMEDA) or pentamethyldiethylenetriamine (PMDETA). The influence of the size and hardness of the alkaline earth metal center on the molecular structures is studied with [(L)K(μ-NPhiPr)(2)Ae(μ-NPhiPr)(2)K(L)] (2: Ae = Ca, L = TMEDA; 3: Ae = Sr, L = TMEDA; 4: Ae = Sr, L = PMDETA; and 5: Ae = Ba, L = PMDETA). The molecular structures are dominated by (attractive and repulsive) electrostatic and steric factors leading to a shortening of the non-bonding AeK distances from calcium to barium.