Visualization and In Situ Ablation of Intracellular Bacterial Pathogens through Metabolic Labeling

Protected by the host cells, the hidden intracellular bacteria are typically difficult to kill by common antibiotics and cannot be visualized without complex cellular pretreatments. Herein, we successfully developed a bacteria‐metabolizable dual‐functional probe TPEPy‐d ‐Ala, which is based on d ‐alanine and a photosensitizer with aggregation‐induced emission for fluorescence turn‐on imaging of intracellular bacteria in living host cells and photodynamic ablation in situ. Once metabolically incorporated into bacterial peptidoglycan, the intramolecular motions of TPEPy‐d ‐Ala are inhibited, leading to an enhanced fluorescent signal, which allows the clear visualization of the intracellular bacteria. Moreover, TPEPy‐d ‐Ala can effectively ablate the labeled intracellular bacteria in situ owing to covalent ligation to peptidoglycan, yielding a low intracellular minimum inhibitory concentration (MIC) of 20±0.5 μg mL^?1, much more efficient than that of a commonly used antibiotic, vancomycin.     

Full use of the liquid nature of the stationary phase: The development of elution‐extrusion counter current chromatography

Elution‐extrusion counter current chromatography extrudes the most solute retained in the column with the highest possible peak resolution. It can greatly improve the hydrophobic window. In recent years, elution‐extrusion counter current chromatography has received extensive attention in the separation of complex samples. This article first reviews the development and application of elution‐extrusion counter current chromatography, including its origin, mechanism, advantages and disadvantages, and some representative applications. At the same time, this review also shared our visions and ideas on how to improve the elution‐extrusion mode. This article aims to provide certain reference for the research of this technology.     

Research Progress in the Field of Adsorption and Catalytic Degradation of Sewage by Hydrotalcite‐Derived Materials

With the rapid development of industry and agriculture and the greatly improved living conditions, the resultant gradually deteriorated environments threaten the human beings. Refractory or even toxic pollutants, which are from different industries such as printing and dyeing, pesticides, chemicals, petrochemicals, plastics and rubber, seriously threat the ecosystems and human health. Having the advantages of flexible composition, unique structure, high stability, memory effect, easy preparation and low cost, hydrotalcite compounds have a great potential in sewage degradation and environmental protection. This study focuses on the adsorption and catalytic properties (such as photocatalysis, electrocatalysis and photoelectrocatalysis) of hydrotalcite‐derived materials for treating organic, inorganic and heavy metal ion sewage. The types of adsorption and catalysis, and the effects of various influencing factors on the degradation efficiency were discussed as well.     

航空发动机旋转叶片振动监测系统研究

介绍了叶尖定时测量旋转叶片的原理，设计的光纤柬式传感结合光电接收实现了高精度的弱光检测。基于“5＋2”传感器均布方案，利用双速率对叶片振动信号进行采样，通过“5＋2”处理算法实现了振动频率的准确辨识，并在某航空设备上进行了高速模拟转子实验，实验表明测得频率与应变仪结果一致。     

磁控溅射制备ZnO薄膜的受激发射特性的研究

用射频磁控反应溅射法在二氧化硅衬底上制备ZnO薄膜。得到了在不同温度下ZnO薄膜的吸收与光致发光。观测到了纵光学波 (LO)声子吸收峰与自由激子吸收峰 ;室温 (30 0K)下 ,PL谱中仅有自由激子发光峰。这些结果证实了ZnO薄膜具有较高的质量。探讨了变温ZnO薄膜的发光特性。研究了ZnO薄膜的受激发射特性。     

双硫腙-活性炭柱富集分离水中痕量铅的条件研究

本文研究了用活性炭加双硫腙柱富集、分离水中痕量铅的适宜条件。用火焰原子吸收法分析了不同分离条件下铅的回收率。并讨论了几种干扰离子的影响情况。     

圆锥透镜对偏轴球面波光束的衍射模式

球面波入射圆锥透镜产生的出射光束中心光斑直径较小且焦深长，适合通讯领域长距离测量和准直。针对实际操作中球面波光束入射时很可能与圆锥透镜的中心轴线发生偏移或倾斜，使衍射光场发生变化，着重研究圆锥透镜对偏轴球面波光束的衍射模式，并通过衍射理论和稳相法分析，研究其径向衍射光场的分布特性。使用半径为15mm，底角为1°的圆锥透镜进行计算机仿真和实验，最后将实验结果与理论分析和仿真结果相比较，证明球面波的曲率半径和出射光束的传输距离越小，偏轴对衍射模式的影响越小。该研究结果表明：在激光通讯等长距离通信中，使用曲率半径小的球面波光束代替平面波入射圆锥透镜，不仅可以扩展焦深，还可以降低偏轴对测量的影响。     

并联铁电体冲击去极化输出电流实验和计算

 为分析不同数量铁电体的输出电流特征，进行了多片并联PZT95/5铁电体冲击去极化实验，测量了电阻负载下铁电体的输出电流；建立了并联铁电体输出电流的计算模型，计算了并联铁电体的输出电流。通过比较计算和实验结果，分析了铁电体数量和冲击波状态对铁电体输出电流的影响。结果表明：若进入铁电体的冲击波为平面波，铁电体输出电流的波形接近方波，电流峰值随铁电体并联数量的增加成比例增加，冲击波波形和侧向稀疏波对铁电体输出电流波形和去极化率有很大的影响。     

喷雾热解法制备的SrWO4膜的阴极射线发光

利用超声喷雾热解法制备了钨酸锶SrWO₄多晶发光膜,并研究了制备条件及掺杂对其阴极射线发光特性的影响.生成的发光膜在300℃以上退火后具有白钨矿结构,其阴极射线发光为一宽带的蓝光,包括一个位于448nm的蓝色发光带和一个位于488.6nm的蓝绿色发光带,是由阴离子络合物WO₄^2-的电荷转移跃迁引起的.发光强度随着退火温度的升高而增强,而退火气氛对其影响不大.在SrWO₄膜中掺入银离子Ag⁺和镧离子La³⁺后,不影响其发光特性,但铕离子Eu³⁺的掺入对发光特性有影响.