改性二氧化硅纳米颗粒提高二氧化碳泡沫稳定性的研究

通过纳米二氧化硅的硅烷化改性, 使其在高矿化度盐水中可以稳定存在的前提下, 研究了改性纳米颗粒与阳离子表面活性剂十二烷基三甲基氯化铵混合体系的溶液稳定性及协同稳定CO₂泡沫的效果. 研究结果表明, 无机盐离子对改性纳米颗粒与阳离子表面活性剂间的静电吸引力具有屏蔽作用, 且矿化度越高, 屏蔽效果越明显, 从而混合溶液更易于在高盐水中稳定; 纳米颗粒表面的活性剂吸附层受二者浓度的影响, 进而影响了颗粒的亲/疏水性; 当混合体系中的表面活性剂浓度低于临界胶束浓度(CMC)时, 混合溶液与CO₂的界面张力高于单独活性剂溶液, 而当活性剂浓度高于CMC时, 对CO₂-溶液界面张力几乎无影响, 最低界面张力可降至6 mN/m左右; 改性纳米颗粒的加入可以进一步提高CO₂体相泡沫半衰期一倍以上, 但受二者浓度比例的影响; 纳米颗粒的加入有效提高了多孔介质中泡沫的表观黏度, 最大增幅由20 mPa·s增至55 mPa·s左右, 泡沫黏度增加接近3倍, 增强了CO₂泡沫驱的封堵作用.     

Synthesis,properties and mechanism of photodegradation of core–shell structured upconversion luminescent NaYF4:Yb3+,Er3+@BiOCl

Microspherical bismuth oxychloride (BiOCl) can only utilize ultraviolet (UV) light to promote photocatalytic reactions. To overcome this limitation, a uniform and thin BiOCl nanosheet was synthesized with a particle size of about 200 nm. As results of UV–visible diffuse reflectance spectroscopy showed, the band gap of this nanostructure was reduced to 2.78 eV, indicating that the BiOCl nanosheet could absorb and utilize visible light. Furthermore, the upconversion material NaYF₄ doped with rare earth ions Yb³⁺ and Er³⁺ emitted visible light at 410 nm following excitation with near‐infrared (NIR) light (980 nm), which could be utilized by BiOCl to produce a photocatalytic reaction. To produce a high‐efficiency photocatalyst (NaYF₄:Yb³⁺,Er³⁺@BiOCl), BiOCl‐loaded NaYF₄:Yb³⁺,Er³⁺ was successfully synthesized via a simple two‐step hydrothermal method. The as‐synthesized material was confirmed using X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy as well as other characterizations. The removal ratio of methylene blue by NaYF₄:Yb³⁺,Er³⁺@BiOCl was much higher than that of BiOCl alone. Recycling experiments verified the stability of NaYF₄:Yb³⁺,Er³⁺@BiOCl, which demonstrated excellent adsorption, strong visible‐light absorption and high electron–hole separation efficiency. Such properties are expected to be useful in practical applications, and a further understanding of the NIR‐light‐responsive photocatalytic mechanism of this new catalytic material would be conducive to improving its structural design and function.     

Complete Embedded Self-Translating Surfaces Under Mean Curvature Flow

We describe a construction of complete embedded self-translating surfaces under mean curvature flow by desingularizing the intersection of a finite family of grim reapers in general position.     

Rationally Designing Molecularly Imprinted Polymer Toward a High Specific Adsorbent by Using Metal as Assembled Pivot

This article presents an original work aimed at rationally designing molecularly imprinted polymer (MIP) toward a high specific adsorbent. Assembling with cobalt as the pivot, the MIP was prepared by coordinating polymerizable monomers around an inducible template. The use of pivot obviously plays a positive role on increasing the specificity of MIP, so as to adsorb more for the template and less for its analogue. Related studies indicate that these may be a result of increasing specific interaction, which makes the MIP capable of recognizing the imprint species. Further information from thermodynamic analysis reveals that the increasing specific interaction, in logic, can be due to a higher fidelity of imprint, which specifically allures the template to bind.     

AlF3包覆天然石墨负极材料的制备及其电化学性能

以天然石墨为原料,通过机械高速分散设备将天然石墨和AlF₃在液相介质中充分混合,混合液喷雾干燥后获得颗粒形态均匀分散的AlF₃包覆天然石墨（NG）复合负极材料（AF/NG）。一方面AlF₃包覆层有助于在天然石墨表面形成稳定的SEI膜,提升材料的循环稳定性;另一方面AlF₃的引入改善了锂离子在天然石墨内外的迁移与扩散,提升复合材料的倍率性能,0.5C倍率下放电比容量达到278 mAh·g^-1,同等倍率下比未包覆AlF₃样品提高了78 mAh·g^-1。合成工艺简单易管控,适合规模化商业生产。     

环己烷1,2-二甲酸二异壬酯增塑剂的气相色谱-质谱分析

建立了气相色谱-质谱联用法定性和定量分析塑料中环己烷1,2-二甲酸二异壬酯(DINCH)的方法。考察了DINCH分子离子的质谱断裂过程,并建立了快速鉴定塑料中DINCH的理论方法。通过对不同溶剂提取效率的对比,采用二氯甲烷作为最佳提取溶剂。在优化条件下,该方法的线性范围为0.24～1.60 mg/L,相关系数为0.998,定量下限(S/N=10)为1.2 mg/kg。在加标水平为80～400 mg/kg时,4种不同塑料(PE、PP、PU、PVC)的回收率和相对标准偏差分别为82%～113%和1.1%～9.0%。将该方法用于实际塑料样品的检测,结果满意。     

Improved staining of phosphoproteins with high sensitivity in polyacrylamide gels using Stains‐All

An improved Stains‐All (ISA) staining method for phosphoproteins in SDS‐PAGE was described. Down to 0.5–1 ng phosphoproteins (α‐casein, β‐casein, or phosvitin) can be successfully selectively detected by ISA stain, which is approximately 120‐fold higher than that of original Stains‐All stain, but is similar to that of commonly used Pro‐Q Diamond stain. Furthermore, unlike the original Stains‐All protocol that was time consuming and light unstable, ISA stain could be completed within 60 min without resorting to protect the gels from light during the whole staining procedure. According to the results, it is concluded that ISA stain is a rapid, sensitive, specific, and economic staining method for a broad application to the research of phosphoproteins.