IMPACT PROPERTIES OF METALLOCENE - CATALYZED ETHYLENE-α-OLEFIN COPOLYMERS

The impact properties of two selected metallocene-catalyzed ethylene-butene copolymers and one conventionalcopolymer were evaluated using Izod impact test. It is found that the metallocene-catalyzed copolymer shows superior impactproperties. This result was explained on the basis of the more homogeneous inter-molecular composition distribution andnarrower molecular weight distribution, which leads to more homogeneous morphology with fewer defects. Stepwisecrystallization improves the impact properties, especially in the crack propagation process, to a large extent. This is due to thedecrease of entanglements by stepwise crystallization, which is advantageous for the chain slip and shear. The polymer withheterogeneous intra-molecular composition distribution exhibits a more evident improvement of impact properties understepwise crystallization.     

Supramolecular assemblies of a naturally derived sophorolipid

Acidic sophorolipid (SL) molecules derived from yeasts represent a novel type of asymmetrical bolaamphiphiles due to their unique structural features that include an asymmetrical polar head size (disaccharide vs COOH), a kinked hydrophobic core (cis-9-octadecenoic chain), and a non-amide polar-nonpolar linkage. Light microscopy, small- and wide-angle X-ray scattering, FT-IR spectroscopy, and dynamic laser light scattering were used to investigate the supramolecular structures of the self-assembled aggregates of SL molecules at different pH values. In acidic conditions (pH < 5.5), giant twisted and helical ribbons of 5-11 microm width and several hundreds of micrometers length were observed for the first time. Increase in solution pH values slowed ribbon formation, decreased ribbon yield, and increased the helicity and entanglements of the giant ribbons. An interdigitated lamellar packing model of acidic SL-COOH molecules with a long period of 2.78 nm, stabilized by both the strong hydrophobic association between the cis-9-octadecenoic chains and strong disaccharide-disaccharide hydrogen bonding, is proposed. The neutralization of SL-COOH in water to SL-COONa produced clear solutions with the formation of short-range ordered aggregates. At concentrations below 1.0 mg/mL, the size of self-assembled aggregates increased as the concentration increased. At concentrations above 1.0 mg/mL, narrowly distributed micellar aggregates with a constant hydrodynamic radius (R(h)) of about 100 nm are formed. The large micelles show strong angular dependence with the fast mode appearing at scattering angle theta >/= 60 degrees.     

Hexadentate hydroxypyridonate iron chelators based on TREN-Me-3,2-HOPO: variation of cap size

TREN-Me-3,2-HOPO, TR322-Me-3,2-HOPO, TR332-Me-3,2-HOPO, and TRPN-Me-3,2-HOPO correspond to stepwise replacement of ethylene by propylene bridges. A series of tripodal, hexadentate hydroxypyridinone ligands are reported. These incorporate 1-methyl-3,2-hydroxypyridinone (Me-3,2-HOPO) bidentate chelating units for metal binding. They are varied by systematic enlargement of the capping scaffold which connects the binding units. The series of ligands and their iron complexes are reported. Single crystal X-ray structures are reported for the ferric complexes of all four tripodal ligands: FeTREN-Me-3,2-HOPO.0.375C(4)H(10)O.0.5CH(2)Cl(2) [P2(1)/n (No. 14), Z = 8, a = 20.478(3) A, b = 12.353(2) A, c = 27.360(3) A; beta = 91.60(1) degrees ]; FeTR322-Me-3,2-HOPO.CHCl(3).0.5C(6)H(14).CH(3)OH.0.5H(2)O [P2(1)/n (No. 14), Z = 4, a = 12.520(3) A, b = 22.577(5) A, c = 16.525(3) A; beta = 111.37(3) degrees ]; FeTR332-Me-3,2-HOPO.3.5CH(3)OH [C2/c (No. 15), Z = 8, a = 13.5294(3) A, b = 19.7831(4) A, c = 27.2439(4) A; beta = 101.15(3) degrees ]; FeTRPN-Me-3,2-HOPO.C(3)H(7)NO.2C(4)H(10)O [P1 (No. 2), Z = 2, a = 11.4891(2) A, b = 12.3583(2) A, c = 15.0473(2) A; alpha = 86.857(1) degrees, beta = 88.414(1) degrees, gamma = 70.124(1) degrees ]. The structures show the importance of intermolecular hydrogen bonds and the effect of cap enlargement to the stability and geometry of the metal complexes throughout the series. All protonation and iron complex formation constants have been determined from solution thermodynamic studies. The TREN-capped derivative is the most acidic, with a cumulative protonation constant, log beta(014), of 25.95. Corresponding values of 26.35, 26.93, and 27.53 were obtained for the TR322, TR332, and TRPN derivatives, respectively. The protonation constants and NMR spectroscopic data are interpreted as being due to the influence of specific hydrogen-bond interactions. The incremental enlargement of ligand size results in a decrease in iron-chelate stability, as reflected in the log beta(110) values of 26.8, 26.2, 26.42, and 24.48 for the TREN, TR322, TR332, and TRPN derivatives, respectively. The metal complex formation constants are also affected by the acidity of a proximal (non-metal-binding) amine in the complexes, a trend consistent with the effects of internal hydrogen bonding. The ferric complexes display reversible reduction potentials (measured relative to the normal hydrogen electrode (NHE)) between -0.170 and -0.223 V.     

Remarkable nanosize effect of zirconia in Au/ZrO2 catalyst for CO oxidation

Nanosize effect of ZrO2 in Au/ZrO2 catalyst was studied by deposition-precipitation of Au nanoparticles in similar sizes (4-5 nm) on ZrO2 nanoparticles of varying sizes. The catalysts were characterized with XRD, TEM, XPS, and nitrogen adsorption to understand the effect of ZrO2 particle size on the catalytic nanostructures. Nanocomposite Au/ZrO2 catalysts consisting of comparably sized Au-metal (4-5 nm) and ZrO2 (5-15 nm) nanoparticles are found advantageous over those containing similarly sized Au-metal but larger ZrO2 (40-200 nm) particles for CO oxidation. This finding may have important implications on the designed preparation of advanced nanostructured catalysts and other chemical materials.     

PREPARATION AND CHARACTERIZATION OF SHISH-KEBAB TYPE LIQUID CRYSTALLINE POLY（p-PHENYLENEVINYLENE）

Novel shish-kebab type liquid crystalline poly（p-phenylenevinylene） derivatives were synthesized by Stille coupling reaction from 2,5-bis[（4-n-alkoxyl）benzoyloxy]1,4-dibromobenzene （monomer l） and 1,2-bis（tributylstannyl） ethylene （monomer 2）. The polymers with alkoxy groups are soluble in common organic solvents and exhibit blue fluorescence. Both the cast film and the annealed film have large red-shifts in fluorescence spectra and show yellow fluorescence. The polymers with CN and NO2 groups show poor solubility and green fluorescence. All the polymers possess liquid crystalline smectic phases. The melting point （Tm） of the polymers decreases when the length of the alkoxy tails of the mesogenic units increases. The polymers are easily aligned under a magnetic field of 10 Tesla. It is found that the conjugated backbone and LC side chain are aligned perpendicular and parallel to the magnetic field, respectively. The polymers show optical dichroism in fluorescence spectra, suggesting that they are available for advance materials with linear optical polarization.     

SYNERGISTIC MODIFICATION OF EPDM AND CROSSLINKING AGENT IN IMMISCIBLE BLENDS OF POLYVINYL CHLORIDE WITH LOW DENSITY POLYETHYLENE

The synergism of ethylene-propylene-diene monomer copolymer （EPDM） and dicumyl peroxide （DCP, a crosslinking agent） in low density polyethylene （LDPE）/poly（vinyl chloride） （PVC） blends was investigated. When EDPM and DCP are added to the blends simultaneously, the tensile properties could be improved significantly, especially for the blends with LDPE matrix. For example, incorporation of 10/1 （mass ratio） EPDM/DCP improves the tensile strength of the LDPE/PVC （mass ratio 80/20） blend from 7.9 MPa to 8.5 MPa and the elongation at break from 25% to 503%. Results from selective extraction, phase-contrast microscopy and thermal analysis reveal that the improvement in the tensile properties of the blends with LDPE matrix is principally due to the formation of a fine crosslinking network of the LDPE and EPDM phase. The outstanding modification effect of EPDM is explained by its dual functions： molecular entanglement with LDPE and the enhanced efficiency of DCP in the blends.     

Coaxial electrospinning core-shell fibers for self-healing scratch on coatings

Polystyrene (PS) fibers with core-shell structure were prepared by coaxial electrostatic spinning using liquid epoxy or curing agent as the core and PS solution as the shell. Scratch self-healing coatings were realized by using the healant-loaded core-shell fibers in the matrix.     

桥联双β-环糊精对N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸的手性识别及机理研究

利用紫外-可见吸收和荧光发射光谱, 结合非线性最小二乘法拟合曲线以及分子力学(MM2)模拟系统地研究了手性分子N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸(PDP和PLP, 总称PPs)与β-环糊精(β-CD)、 2-位硒桥联双β-CD(2-SeCD)和2-位碲桥联双β-CD(2-TeCD)的包结能力大小及这3个环糊精对PPs手性识别能力的差异和识别机理. 研究结果表明, PPs不能与单疏水空腔的β-CD形成很好的包结复合物, 与具有较长桥联链的2-TeCD结合能力最强. 2-TeCD与PDP和PLP的结合常数分别为2.33×104和6.07×103 L/mol, 对PPs的手性识别比达到KD/KL=3.84, 高于2-SeCD(KD/KL=2.61). 用MM2模拟得出了PPs与这两个双环糊精形成复合物的三维结构: PPs的绝大部分位于双环糊精两个空腔之间, 但是在这两个复合物中, 苯环与芘环所成的二面角不同. 此外, PPs与这两个双环糊精作用时均存在明显的氢键相互作用, 且2-TeCD强于2-SeCD.     

Repeatability and pattern recognition of bacterial fatty acid profiles generated by direct mass spectrometric analysis of in situ thermal hydrolysis/methylation of whole cells

Direct CI mass spectrometry profiling of fatty acid methyl esters (FAMEs) from in situ thermal hydrolysis/methylation (THM) of whole bacterial cells with tetramethylammonium hydroxide (TMAH) has been demonstrated as a potential method for real time and fieldable detection/identification of microorganisms. Bacillus anthracis (Ames), Yersinia pestis (Nair. Kenya), Vibrio cholerae (E1 Tor), Brucella melitensis (Abortus wild) and Francisella tularensis (LVS vaccine) were profiled by this method during a 10-month period. Repeatability of the in situ FAME data was calculated using one-way analysis of variance (ANOVA) and a t-test. Artificial neural network (ANN) and multivariate statistics of the FAME profiles were also compared for bacterial identification/classification. Equivalent results were obtained with a multivariate rule building expert system (MuRES) and the ANN. However, the ANN analysis required much less computer time and was deemed the best choice for this application. In situ THM FAME profiles of the bacterial samples provided comparable results with those obtained from the Microbial Identification System (MIDI) (Newark, DE) wet chemistry-gas chromatographic based system.     

Theoretical study of the local structure and Raman spectra of CaO-SiO2 binary melts

A procedure for the Raman spectra calculation of vitreous and molten silicates was presented in this paper. It includes molecular dynamics MD simulation for the generation of equilibrium configurations, Wilson's GF matrix method for the calculations of eigenfrequencies and corresponding vectors, electro-optical parameters method (EOPM) for the Raman intensity calculations, and the bond polarizability model (BPM) for the determination of polarizability and polarizability derivative. One of the most important characteristics of this procedure is the achievement of the partial Raman spectra of five tetrahedral units, as well as the total spectral envelope. In this paper, the calculation was carried out for the vitreous and molten calcium silicates with different compositions and at various temperatures. It is worthwhile to note that the calculation is based on statistical configurations distribution in the space and so it is not needed to artificially adjust the full width at half maximum (FWHM) of spectra. It was also tested through the good agreement of the calculated spectra with the experimental, including some regularity of spectral properties. According to the calculation, the symmetrical stretching of whole tetrahedral units, to which the stretching of Si-O(nb) bond gives the main contribution to intensity, is proven to be the dominance in the high-frequency range (800-1200 cm(-1)) and the symmetrical bending of Si-O(b)-Si, to which the stretching of Si-O(b) bond exhibits the main contribution, is the dominance in the medium-frequency range (400-700 cm(-1)). As the first theoretical results, the Raman scattering coefficient of each Q(i) was found little change along with the variation of composition and temperature.