溶胶凝胶法制氧化铝负载铜基超细粒子催化剂的研究

采用溶胶凝胶法制氧化铝负载铜基超细粒子催化剂的制备了氧化铝负载的铜基超细粒子催化剂，用ＴＧ－ＤＴＡ，ＸＲＤ，ＢＥＴ以及ＴＥＭ等技术手段，对催化剂的物相结构，表面孔结构，粒子形貌以及催化性能等进行了研究。结果表明，利用溶胶凝胶法，可以直接帛备出高比表面积，低堆积密度的纤维状纳米级负载型Ｃｕ／Ａｌ２Ｏ３超细粒子；活性组分以远低于纳米级的微晶粒子簇状态，均匀地分散在纳米级氧化铝载体表面上，而且在低于５０     

新型咔唑基半胱氨酸双光子荧光探针的合成及光学性能

以咔唑为母体，设计并合成了一种可检测半胱氨酸的新型双光子荧光探针（3），其结构经¹H NMR, ¹³C NMR, HR-MS(ESI)和元素分析表征。采用UV-Vis和FL研究了3的光学性能。结果表明：半胱氨酸加量为0~50 eq.时，3的紫外最大吸收峰从365 nm蓝移至342 nm；在350 nm处出现一个等吸收点；在450 nm处的荧光强度增强约23倍。     

4,4'-二氨基三苯胺的合成与纯化

以苯胺和对硝基氯苯为原料, K₂CO₃作催化剂, 合成出了中间产物4,4'-二硝基三苯胺(DNTPA). 将中间产物用10%(质量分数)的Pd/C催化剂加氢催化还原, 得到纯度为96.6%的目标产物4,4'-二氨基三苯胺(DATPA), 合成总产率为38%. 与其它方法相比, 该方法原料便宜易得, 纯度很高, 产物可作为反应的单体原料.     

中孔分子筛SO42-/Zr-MCM-41催化裂解聚丙烯反应研究

采用水热合成法制备了不同硅锆比的中孔分子筛Zr-MCM-41,用强酸性基团SO42-对其进行修饰,制得SO42-/Zr-MCM-41中孔分子筛.采用XRD、FT-IR、NH3-TPD及氮气吸附脱附等技术对其结构和酸强度进行表征.通过改变硅锆比、负载不同的酸性基团对Zr-MCM-41的酸性进行调变,并将其用于催化聚丙烯(PP)的裂解反应,结果表明S i/Zr=40的SO42-/Zr-MCM-41具有较好的催化裂解活性.另外,与热裂解以及HZSM-5和Zr-MCM-41为催化剂时PP的裂解反应结果进行了比较,结果证明SO42-/Zr-MCM-41不仅具有较高的裂解转化率,而且具有较高的液体产物收率,适宜于空间位阻较大的PP的催化裂解反应.     

新型纳米复合杂多酸催化剂H3PW12O40/SiO2催化合成水杨酸异丙酯的研究

水杨酸异丙酯是合成水胺硫磷、甲基异柳磷等农药的重要中间体[1], 还可用作香料和有机合成的中间体. 工业上一般通过水杨酸与异丙醇的酯化反应来合成, 常用的方法有硫酸法、水杨酰氯法和混酸法等, 然而这些方法都不同程度地存在着设备腐蚀严重, 能耗较高, 环境污染大等缺点. 杂多酸是一类具有笼形结构的多核配合物, 具有强酸性、强氧化性、"假液相"等特性, 在催化领域有广泛的应用[2]. 但杂多酸存在比表面小、易失活、难回收和使用寿命短等缺点.     

Conformational Transformation Exhibited by the Peptide Extracted from Crystalline Region of Bombyx mori Silk Fibroin in Solid and Solution States

The conformational transformation of a 30-residue peptide H（Ala-Gly-Ser-Gly-AIa-Gly）5OH, i.e., （AGSGAG）5, extracted from highly crystalline region of Bombyx mori （B. mori） silk fibroin was described by using the high resolution solid state 13^C NMR, and CD spectroscopies. Based on the conformation-dependent 13^C NMR chemical shifts of the Ala, Gly and Ser residues and the line-shape analysis of the conformation sensitive Ala Cβ resonance, the peptide revealed a strong preference for silk Ⅱ structural form, i,e,, an antiparallel fl-sheet structure （φ= - 140±20°and ψ= 135±20°） in solid state. On the contrary, the CD spectra of this peptide in the two non-native hexafluorinated fibre spinning solvents, hexafluoroisopropanol （HFIP） and hexafluoroacetone （HFA）, exhibited the existence of an unusual tightly-folded conformation resembling 310-helix （φ=- 60±20° and ψ=-30±20°）, as judged from the R ratio of [θ]222/[θ]203 in HFIP solution, whereas a dynamically averaged unordered structure in HFA, Taken together, the information inclined to hypothesis that the primary structure of the highly crystalline regions of B. mori silk fibroin may be easily accessible to the large conformational changes, which in turn may be critical for facilitating the structural transformation from unprocessed silk fibroin （silk I form） to processed silk fiber （silk Ⅱform）.     

Sufficient Conditions for Amalgamated 3-Manifolds to be ∂-Irreducible∗

In this paper, the authors give some sufficient conditions for an amalgamated 3-manifold along a compact connected surface F with boundary to be ?-irreducible in terms of distances between some kinds of vertex subsets of the curve complex and the arc complex of F.     

ISOLATION,CHARACTERIZATION AND EXPRESSION OF THE COMPLEMENTARY DNA FOR HUMAN TUMOR NECROSIS FACTOR (TNF-α)

A cDNA for human TNF-α (615bp) was isolated by means of polymerase chain reaction (PCR) using first strand cDNA from PMA-induced HL-60 cells as template. The result from sequencing the 615 bp cDNA fragment indicated that it corresponded to the entire sequence of mature human TNF coding region. Direct expression of mature human TNF was achieved using a plasmid pHT-1 constructed by ligation of the cDNA and a synthetic DNA. The IPTG-induced bacterial product (hTNF) showed cytotoxicity to mouse L-929 cells. The TNF activity was further identified by neutralization of a specific monoclonal antibody against human TNF-α. Approximately 80,000 units of activity were detected per ml of culture at A600=2.     

植物纤维及其提取物增强聚合物的3D打印成型研究

3D打印技术作为新型成型技术,近年来受到了巨大的关注,但常见的PLA、ABS等单体打印耗材由于其自身的不同缺点,限制了其进一步的应用。本文综述了植物纤维及其提取物增强聚合物复合材料在3D打印领域的应用研究进展,重点阐述了木纤维、竹纤维,秸秆纤维等常见植物纤维用于3D打印的研究现状,还介绍了纤维素、木质素、半纤维素等植物纤维提取物增强聚合物用于3D打印的研究情况。同时对植物纤维/聚合物材料存在的一些问题及改性方法进行了分析与展望。     

光引发甲基丙烯酸聚合改性羟基磷灰石表面的研究

羟基磷灰石(HPA)具有良好的生物相容性和生物活性,被认为是最有前途的陶瓷人工齿和人工骨置换材料。然而,纯HAP的力学性能比较差,断裂韧性(KIC)不超过1.0MPa.m1/2(自然骨为2-12MPa.m1/2)[1],作为人工种植体其使用可靠性较差。这大大限制了它在承载部位骨替换中的应用。为了改善