The hysteresis loops of a ferroelectric bilayer film with surface transition layers

Based on the transverse Ising model in the framework of the mean field approximation,this paper discusses a ferroelectric bilayer film with the surface transition layers within each constituent slab and an antiferroelectric interfacial coupling between two slabs.The hysteresis loop of a bilayer film is investigated.The results show that the surface transition layer in a ferroelectric bilayer film plays a significant role in realizing the multiple-state memory.     

Particles in composite polymer electrolyte for solid-state lithium batteries:A review

Solid-state lithium batteries(SSLBs)have been identified as one kind of the most promising energy conversion and storage devices because of their safety,high en...     

Effect of Co on the thermal stability and impact toughness of sintered Nd–Fe–B magnets

The effect of Co on the thermal stability and impact toughness of sintered Nd–Fe–B magnets has been investigated. The results showed that the addition of Co decreased the intrinsic coercivity and the temperature coefficient of remanence (α), and increased the temperature coefficient of coercivity (β) for sintered Nd–Fe–B magnets. The impact toughness of sintered Nd–Fe–B magnets with the addition of Co first decreases, reaches a minimum, and then starts to increase. The possible reasons for increasing the temperature coefficients of coercivity (β) for sintered Nd–Fe–B magnets were analyzed, and the relations between the microstructure and impact toughness of sintered Nd–Fe–B magnets were studied.     

纳米氮化硼在吡啶热条件下的物相转变规律

为了研究纳米氮化硼在溶剂热条件下的物相转变规律, 利用三氯化硼(BCl3)和氮化锂(Li3N)为原料, 吡啶作为溶剂合成了纳米氮化硼. 在实验过程中, 系统研究了反应温度、压力以及反应时间的影响, 发现在吡啶热反应体系中, 首先形成的是结构无序的无定形纳米氮化硼(aBN). 随着反应温度和压力的提高以及时间的延长, 纳米氮化硼中的原子排列有序度不断提高, 逐渐出现了结构部分有序的湍层氮化硼(tBN)和结构有序的六方氮化硼(hBN). 在反应温度和压力提高时, 样品中首先是tBN的含量提高, 然后是hBN的含量明显增加, 说明在合成反应过程中存在aBN→tBN→hBN的物相转变.     

Na_3Eu(DPA)_3-PC树脂的制备及其发光性能

根据稀土有机配合物 Na3Eu(DPA) 3(DPA:2 ,6-pyridine dicarboxylic acid)的发光强和热稳定性高的特点 ,采用加热方法将 Na3Eu(DPA) 3掺入 PC树脂中 ,制成发光塑料树脂 .其发光性能结果表明 ,Na3Eu(DPA) 3掺入 PC树脂后 ,仍保持稀土有机配合物原有的发光特性 ,制成的 Na3Eu(DPA) 3-PC树脂复合材料具有良好的发光性能 ,其发光强度与稀土有机配合物 Na3Eu(DPA) 3掺入的比例量有关 ,但没有一定的线性关系 .     

Synthesis of Titanium (IV) Complexes with Schiff‐base Ligand and Their Catalytic Activities for Polymerization of Ethylene and Styrene

Reaction of titanium (IV) isopropoxide with the unusual land of Shiff‐base in 1:1 molar ratio gives a variety of new derivatives of titanium (IV) in high yield. These complexes were characterized by elemental analyses, IR, MS and ¹H NMR. It was noteworthy to find that all these complexes were active for polymerizations of ethylene and styrene when activated by a Lewis acid cocatalyst (MAO).     

卷烟内在质量的气相色谱－数学聚类法研究

采用吸附丝色谱方法采集和分析了红塔山牌卷烟的挥发性成分,对 10个真品进行 R型聚类分析和 R型因子分析,从 26个组分提取出对卷烟质量起主导作用的 7个特征变量（组分）,并对其丰度进行了讨论,进而建立了红塔山卷烟的质量数学模型,用 2个真品和 2 个假冒品对模型进行了检验,结果令人满意。     

线性约束0-1 二次规划的一个定界技术

本文给出确定线性约束0－1二次规划问题最优值下界的方法,该方法结合McBride和Yormark的思想和总体优化中定下界的方法,证明了所定的界较McBride和Yormark的要好．求解线性约束0－1二次规划问题的分支定界算法可以利用本文的定界技术．     

机敏柔性梁的振动主动控制

提出了用于机敏结构中振动主动控制的仿人控制算法,对压电阻尼技术进行了理论和实验研究,给出了传感器,执行器和受控结构之间的关系,用ＰＺＴ作执行元件实现了柔性梁振动主动控制系统,给出了实验结果。     

温度和应变率对拉伸载荷下高强铝合金本构关系影响的研究

介绍一种用于高温ＳＨＢ试验的新型快速加热电炉,可在一分钟左右将试件加热至５００℃,最高可加热至１０００℃,并且对金属材料和非金属材料均可加热,从而克服了目前使用的各种加热方法的局限性． 在２０℃～５００℃和０．００２０８～３５０ ｓ－ １的范围内研究了温度和应变率对拉伸载荷下高强铝合金本构关系的影响． 结果表明：（１）随着应变率的提高,该材料的强度提高,延伸率降低; （２）该材料的强度、延伸率及应变率均随温度的升高而降低; （３）该材料应变率敏感性随温度的升高而降低