Protection of iron corrosion by stearic acid and stearic imidazoline self-assembled monolayers

A type of stearic imidazoline (IM) inhibitor was prepared using stearic acid (SA) and diethylenetriamine (DETA) as raw materials. The monolayers of IM and SA were assembled on the iron surface. The electrochemical characterization of stearic acid (SA) and stearic imidazoline (IM) on an oxide free iron surface had been studied. The monolayers of IM inhibitor were characterized by electrochemical impedance spectroscopy (EIS), electrochemical polarization curves, double layer capacitance, X-ray photoelectron spectroscopy (XPS) and molecular simulation. The results of electrochemical studies had illustrated that the inhibition efficiency of IM was higher than SA. XPS showed that the IM molecules adsorbed on the iron surface. The molecular simulation calculations showed that the IM molecules were tilted at an angle on the iron surface.     

Making equation of state models predictive: Part 2: An improved PCP-SAFT equation of state

We use the PCP-SAFT equation of state, which is of the Van der Waals type and has a sound physical basis, to predict mixture properties, such as vapor–liquid and liquid–liquid equilibria, as well as excess enthalpies. We use molecular properties, such as dipole moment, quadrupole moment, polarizability and dispersion interaction coefficients, that have been determined quantum mechanically in Part I of this publication and adjust the remaining three pure compound parameters to pure compound data. We finally present a new combination rule for the dispersion energy parameter ? that is based on the quantum mechanically determined data. The predictions based on quantum mechanically determined pure compound properties along with the new combination rule show an improved performance compared to the original PCP-SAFT combination rule.     

热容模式下激光介质的动态光学畸变

 开展了热容模式下激光介质动态光学畸变研究，初步分析了温度梯度、光弹效应及介质端面变形对整个波前畸变带来的影响，并将光学畸变转化为谐振腔损耗，数值模拟了热容激光器输出功率随时间的变化规律，模拟结果表明：当激光器工作温度低于400 K时，由粒子数玻耳兹曼分布引起的功率下降可以忽略，动态热效应是实验中热容激光器输出功率随时间快速下降的原因。     

Optical characteristics of semiconductor saturable absorber mirrors investigated by the reflection Z-scan technique

Recently, the semiconductor saturable absorber mirror (SESAM) has become a key component of passive mode-locked solid-state lasers. Here we present a simple method based on the reflection Z-scan technique to measure the key optical parameters of SESAM such as saturation fluence and modulation depth. The experimental results demonstrate that our method is able to perform with a high accuracy of 10⁻⁴ and a dynamic range of over four orders of magnitude.     

利用微悬臂梁表面应力研究聚N-异丙基丙烯酰胺分子的构象转变

提出了一种基于微悬臂梁传感技术研究大分子折叠/构象转变的新方法.通过分子自组装的方法将热敏性的聚N-异丙基丙烯酰胺(PNIPAM)分子链修饰到微悬臂梁的单侧表面，用光杠杆技术检测温度在20—40℃之间变化时由于微悬臂梁上的PNIPAM分子在水中的构象转变所引起的微悬臂梁变形.实验结果显示：在升温过程中，微悬臂梁的表面应力发生了变化并且导致微悬臂梁产生了弯曲变形，这个过程对应着微悬臂梁上的PNIPAM分子从无规线团构象到塌缩小球构象的构象转变.在降温过程中，微悬臂梁发生了反方向的弯曲变形，这对应着PNIPA 关键词： 构象转变 聚N-异丙基丙烯酰胺分子链 表面应力 微悬臂梁     

单谐振腔外部Q值的计算方法

 通过对带有耦合器的单驻波腔进行等效电路分析，推导出可计算带有耦合波导的单谐振腔外部Q值的反射相位法，该方法通过计算不同频率的反射相位来确定谐振频率和外部Q值。详细叙述了在CST Microwave Studio中用谐振模式求解法、直接时域跟踪法和反射相位法进行计算的步骤；用这3种方法分别计算了二次发射微波电子枪的外部Q值并和实验测量结果做了比较。结果显示3种计算方法都有很高的精度,但反射相位法的速度最快，耗时1 071 s。计算发现外部Q值与耦合口长度的4.1次方成反比。     

AnUV-algorithm for semi-infinite multiobjective programming

In this paper, we give an application ofUV-decomposition method of convex programming to multiobjective programming, and offer a new algorithm for solving semi-infinite multiobjective programming. Finally, the superlinear convergence of the algorithm is proved.     

退火对电子束热蒸发193nm Al2O3/MgF2反射膜性能的影响

设计并镀制了193nm Al2O3/MgF2反射膜,对它们在空气中分别进行了250-400℃的高温退火,测量了样品的透射率光谱曲线和绝对反射率光谱曲线.发现样品在高反射区的总的光学损耗随退火温度的升高而下降,而后趋于饱和.采用总积分散射的方法对样品在不同退火温度下的散射损耗进行了分析,发现随着退火温度的升高散射损耗有所增加.因此,总的光学损耗的下降是由于吸收损耗而不是散射损耗起主导作用.对Al2O3材料的单层膜进行了同等条件的退火处理,由它们光学性能的变化推导出它们的折射率和消光系数的变化,从而解释了相应的多层膜光学性能变化的原因.反射膜的反射率在优化联系、镀膜工艺与退火工艺的基础上达98%以上.     

流-固界面波的激光激发与光偏转检测

基于光偏转原理,研制了可用于流-固界面波探测的光纤传感装置.在此基础上,建立了以调Q Nd∶YAG激光为流-固界面波激发光源的实验系统.实验上探测了激光在空气-铝、水-铝和酒精-铝等界面上激发的界面波波形.根据实验波形,算得在这三种界面上的泄漏Rayleigh波和Scholte波的速度分别为2889 m/s和339 m/s、2916 m/s和1512 m/s、2872 m/s和1184 m/s,此实验值与理论计算值相比,偏差小于5％.