Negative refraction of complex lattices of dielectric cylinders

Some photonic crystals (PCs) consisting of complex lattices of dielectric cylinders can have an effective refraction index (neff$n_{\mathrm{eff}}$) of −1. Subwavelength imaging by a slab of a honeycomb PC of dielectric cylinders with neff=−1$n_{\mathrm{eff}}=-1$ is investigated and an open resonator with a quality factor higher than 3000 is designed with the same PC. Air–PC interfaces with low reflection are also used for the slab lens and open resonator.     

Synthesis of 2D Germanane (GeH): a New,Fast, and Facile Approach

Germanane (GeH), a germanium analogue of graphane, has recently attracted considerable interest because its remarkable combination of properties makes it an extremely suitable candidate to be used as 2D material for field effect devices, photovoltaics, and photocatalysis. Up to now, the synthesis of GeH has been conducted by substituting Ca by H in a β‐CaGe₂ layered Zintl phase through topochemical deintercalation in aqueous HCl. This reaction is generally slow and takes place over 6 to 14 days. The new and facile protocol presented here allows to synthesize GeH at room temperature in a significantly shorter time (a few minutes), which renders this method highly attractive for technological applications. The GeH produced with this method is highly pure and has a band gap (E_g) close to 1.4 eV, a lower value than that reported for germanane synthesized using HCl, which is promising for incorporation of GeH in solar cells.     

Advanced Surfaces by Anchoring Thin Hydrogel Layers of Functional Polymers

Surface design and engineering is a critical tool to improve the interaction of materials with their surroundings. Immobilization of soft hydrogels is one of the attractive strategies to achieve surface modification. The goal of this review is to provide a comprehensive overview of the different strategies used for surface tethering of hydrogel layers via crosslinking immobilization of pre-fabricated functional polymers. In this strategy, crosslinkable polymers are first prepared via various polymerization techniques or post-functionalization of polymers. Afterwards, the crosslinkable polymers are attached or tethered on the surfaces of substrates using a variety of approaches including photo-crosslinking, click reactions, reversible linkages, etc. For each case, the principles of hydrogel tethering have been explained in detail with representative examples.Moreover, the potential applications of the as-modified substrates in specific cases have also been addressed and overviewed.     

Syntheses and crystal structures of new mononuclear and binuclear ruthenium complexes supported by salicylaldimine ligands

Treatment of Ru₃(CO)₁₂ with salicylaldimines [2-HOC₆H₄-CH?=N–C₆H₄-4-R] [R?=?Me; Cl; Br; OMe; CF₃] in refluxing toluene gave three novel binuclear ruthenium carbonyl complexes {[µ-?²-2-OC₆H₄-CH=N-C₆H₄-4-R)][µ-?²-2-CH₂-OC₆H₄][µ-?-NH-C₆H₄-4-R]}Ru₂(CO)₄ [R?=?Me (1), Cl (2), Br (3)] and three mononuclear carbonyl complexes [2-OC₆H₄-CH=N-C₆H₄-4-R][2-OC₆H₄-CH₂NH-C₆H₄-4-R]Ru(CO)₂ [R?=?Me (4), OMe (5), CF₃ (6)], respectively. The structures of 1–6 were fully characterized using IR and NMR spectroscopy, elemental analysis and single-crystal X-ray diffraction. These results suggest that the substituent group on the phenyl of salicylaldimine has a significant effect on the structure of the Ru complex.

     

Preparation of copper ferrite by sol–gel method and the synergistic catalytic for the thermal decomposition of ammonium perchlorate

Journal of Sol-Gel Science and Technology - In the present work, copper ferrite was prepared by a simple and mild sol–gel method followed by low-temperature calcination, and characterized by...     

Generation and Identification of the Linear OCBNO and OBNCO Molecules with 24 Valence Electrons

Two structural isomers containing five second-row element atoms with 24 valence electrons were generated and identified by matrix-isolation IR spectroscopy and quantum chemical calculations. The OCBNO complex, which is produced by the reaction of boron atoms with mixtures of carbon monoxide and nitric oxide in solid neon, rearranges to the more stable OBNCO isomer on UV excitation. Bonding analysis indicates that the OCBNO complex is best described by the bonding interactions between a triplet-state boron cation with an electron configuration of (2s)⁰(2p_σ)⁰(2p_π)² and the CO/NO⁻ ligands in the triplet state forming two degenerate electron-sharing π bonds and two ligand-to-boron dative σ bonds.     

乙炔氢氯化反应中的负载金-离子液体催化剂:离子态金物种的稳定机制

聚氯乙烯(PVC)作为世界通用工程塑料之一,具有优异的物理、化学和机械性能,在工业、农业、建筑、包装、电力等行业中应用广泛.氯乙烯是生产聚氯乙烯的重要单体.氯乙烯的生产主要有电石法和乙烯法两种工艺路线,由于我国“贫油、富煤、少气”的资源现状,电石法产能占全部产能的83%以上.电石法生产氯乙烯的原理是在氯化汞催化剂存在下,将电石水解精制后的乙炔气与氯化氢加成直接合成氯乙烯.随着节能减排及环保要求的逐渐提高和国际涉汞公约的实施,开发新一代绿色无汞催化剂具有重要的战略意义.近年来,金基催化剂是无汞催化剂基础研究和技术开发中最重要的方向.在之前的工作中,我们课题组首先报道了负载离子液体-金催化剂体系(Au-SILP)在电石法生产氯乙烯工艺中的应用,并发现离子液体的存在可以显著提高金活性物种在载体表面的分散度和稳定其化学价态.在后续研究中,我们在负载离子液体-金催化体系中引入金属铜离子(Cu^2+),利用反应过程中Au-Cu之间的氧化还原循环,设计并制备了金属铜基配位离子液体,构建了负载离子液体-金-铜催化剂体系.铜离子的引入形成了一个催化剂自身维持氧化态的微环境,实现了被还原金物种的原位氧化再生.本文在上述研究基础上,利用配位离子液体[Bmim][N(CN)2]中[N(CN)2^–]阴离子和阳离子金之间的强配位作用,构建出比Au-Cl键更稳定的Au–N键,并通过X射线光电子能谱(XPS)、球差校正-扫描透射电镜(AC-STEM)和扩展X射线吸收精细结构(EXAFS)表征证明了Au以单原子状态存在于载体表面.制备的Au-N(CN)2/AC催化剂在乙炔氢氯化反应中表现出比Au-Cl/AC和Au/AC催化剂更高的稳定性和催化活性以及更短的诱导期.进一步表征分析发现,[N(CN)2^–]配体促进了阳离子金和配体之间的电子转移,提高了阳离子金的电子云密度,削弱了乙炔在阳离子金上的吸附强度,抑制了其还原,提高了催化剂的稳定性.更重要的是,与阳离子金配位的[N(CN)2^–]配体使得反应过程中的氯化氢在氮位点发生化学解离,促进了氯化氢活化,同时降低了反应能垒.对负载配位离子液体-金催化体系反应诱导期的分析结果表明,反应诱导期与反应物(乙炔、氯化氢)分子在离子液体层中的溶解度无关,而主要取决于催化剂中Au(Ⅲ)物种的含量和反应物分子在离子液体中的扩散速率.上述研究结果进一步深化了离子液体和活性金物种之间电子的作用机理,建立了负载离子液体-金催化剂体系对反应物的活化机制和反应机理,为进一步开发具有工业应用价值的乙炔氢氯化反应无汞催化剂提供了科学基础和参考.     

A Conjugated Copolymer Bearing Imidazolium-based Ionic Liquid:Electrochemical Synthesis and Electrochromic Properties

An imidazolium-based ionic liquid(IL) modified triphenylamine derivative,namely 1-(4-((4-(diphenylamino)benzoyl) oxy)butyl)-3-methyl imidazole tetrafluoroborate(TPAC_6 IL-BF_4),was designed and synthesized,and further applied with 3,4-ethylene dioxythiophene(EDOT)to prepare conjugated copolymer P(EDOT:TPAC_6 IL-BF_4) via electrochemical polymerization.The cyclic voltammetry curves show that the copolymer P(EDOT:TPAC_6 IL-BF_4) possesses two pairs of redox peaks,which should be ascribed to the redox behaviors of EDOT and triphenylamine.The ultraviolet-visible(UV-Vis) absorption spectrum of P(EDOT:TPAC_6 IL-BF_4) exhibits one maximum absorption peak at 580 nm and a small shoulder characteristic peak at 385 nm under neutral state which are assigned to π-π~* conjugated structure of EDOT and triphenylamine.After being applied at the positive voltage,the copolymer color changes from dark blue to light blue,which is close to the color of poly(3,4-ethylenedioxythiophene)(PEDOT).Surprisingly,the copolymer P(EDOT:TPAC_6 IL-BF_4) shows shorter switching time of 0.37 s,0.30 s at 580 nm and 0.38 s,0.45 s at 1100 nm compared with PEDOT.It is more intriguing that the copolymer P(EDOT:TPAC_6 IL-BF_4) exhibits electrochromism even in free supporting electrolyte.The results confirm that the existence of imidazolium-based ionic liquid has an improvement on the ion diffusion properties and the switching time of conjugated polymer,which may provide a potential direction for the preparation of high-performance electrochromic materials.     

A Triple Crosslinking Design toward Epoxy Vitrimers and Carbon Fiber Composites of High Performance and Multi-shape Memory

It remains a challenge to use a simple approach to fabricate a multi-shape memory material with high mechanical performances. Here,we report a triple crosslinking design to construct a multi-shape memory epoxy vitrimer(MSMEV), which exhibits high mechanical properties,multi-shape memory property and malleability. The triple crosslinking network is formed by reacting diglycidyl ether of bisphenol F(DGEBF) with4-aminophenyl disulfide, γ-aminopropyltriethoxysilane(APTS) and poly(propylene glycol) bis(2-aminopropyl ether)(D2000). The triple crosslinking manifests triple functions: the disulfide bonds and the silyl ether linkages enable malleability of the epoxy network; the silyl ether linkages impart the network with high heterogeneity and broaden the glass transition region, leading to multi-shape memory property; a small amount of D2000 increases the modulus difference between the glassy and rubbery states, thereby improving the shape fixity ratio. Meanwhile,the high crosslinking density and rigid structure provide the MSMEV with high tensile strength and Young's modulus. Moreover, integrating carbon fibers and MSMEV results in shape memory composites. The superior mechanical properties of the composites and the recyclability of carbon fiber derived from the dissolvability of MSMEV make the composites hold great promise as structural materials in varied applications.     

Cobalt and nitrogen atoms co-doped porous carbon for advanced electrical double-layer capacitors

Electrical double-laye r capacitors are widely concerned fo r their high power density,long cycling life and high cycling efficiency.However,their wide application is limited by their low energy density.In this study,we propose a simple yet environmental friendly method to synthesize cobalt and nitrogen atoms co-doped porous carbon(CoAT-NC) material.Cobalt atoms connected with primarily pyridinic nitrogen atoms can be uniformly dispersed in the amorphous carbon matrix,which is benefit for improving electrical conductivity and density of states of the carbon material.Therefore,an enhanced perfo rmance is expected when CoAT-NC is served as electrode in a supercapacitor device.CoAT-NC displays a good gravimetric capacitance of 160 F/g at 0.5 A/g combing with outstanding capacitance retention of 90% at an extremely high current density of 100 A/g in acid electrolyte.Furthermore,a good energy density of30 Wh/kg can be obtained in the organic electrolyte.