锌掺杂对TiO2染料敏化电池光阳极中电荷俘获态分布及电子复合过程的影响

基于瞬态光电压和瞬态光电流技术研究了锌掺杂的TiO2染料敏化太阳能电池中电子复合及传输的动力学行为.通过实验获得了不同阳极掺杂条件下的电子复合时间常数与电子收集时间常数,考察了锌掺杂对电池阳极材料导带能级和电子俘获态的影响.研究结果表明,锌的掺杂在提高TiO2导带能级的同时延长了俘获态电子的复合时间常数,从而大大提高了电池的开路电压.     

多孔炭载聚钴酞菁修饰电极用于苯二酚的电催化及检测

以二氧化硅纳米球为模板,通过葡萄糖的水热聚合反应制备了具有三维结构的多孔炭(PC)。采用电化学聚合方法将单体钴酞菁聚合在多孔炭修饰的玻碳电极(PC/GC)表面,制备了多孔炭载聚钴酞菁的修饰电极(Co-TAPc/PC/GC)。通过循环伏安法(CV)研究了间苯二酚、邻苯二酚和对苯二酚在此修饰电极的电化学响应。结果表明,相对于裸玻碳电极、多孔炭或聚钴酞菁单独修饰的电极,该修饰电极对3种同分异构体的酚类物质均有更好的电催化活性。利用计时安培技术,该修饰电极对间苯二酚、邻苯二酚及对苯二酚分别在5.0×10-6～5.0×10-4 mol/L,6.0×10-6～2.5×10-4 mol/L和2.0×10-6～8.0×10-4 mol/L范围内具有较好的线性响应。此修饰电极具有制备简单、响应灵敏、稳定性好等优点。     

表面解吸常压化学电离质谱快速鉴别樟木制品

采用自行研制的表面解吸常压化学电离质谱(SDAPCI-MS),在无需样品预处理的情况下,对樟木制品及普通木材进行检测,在正离子模式及m/z 90～400范围内获得其化学指纹图谱,并通过主成分分析(PCA)方法对所获指纹谱图信息进行分析,进而对不同样品进行鉴别。结果表明,SDAPCI-MS能够对樟木表面多种特征化学成分(樟脑,香叶醇等)进行解吸电离,快速获得樟木的化学指纹谱图,并能够对目标组分做多级串联质谱鉴定。结合PCA方法,可对不同品质、不同种类的木材样品进行区分。结果表明,本方法灵敏度高,分析速度快(单个样品分析时间小于3 min),可望应用于珍贵木材快速无损分析及品质鉴定。     

Biodegradation of Crude Oil by a Newly Isolated Strain Rhodococcus sp. JZX-01

A highly efficient oil-degrading bacteria JZX-01 was isolated from the oil-contaminated soil of the seacoast near the Boxi Offshore Oil Field of China. Morphological, physiological, and 16S rDNA gene sequence analyses indicated that JZX-01 was assigned to the genus Rhodococcus sp. This strain decomposed 65.27?±?5.63 % of the crude oil in 9 days. Gas chromatography–mass spectrometry analysis showed that even the long-chain hydrocarbons (C31–C38) and branched alkanes (pristine and phytane), which were regarded as the stubborn ones, could be degraded. Further study showed that the bacteria still has good oil degradation ability at low temperatures as well as under high salt conditions. Moreover, JZX-01 was found to have a biosurfactant-producing capacity, which significantly favors the surface tension reduction and crude oil degradation. The promising isolated strain Rhodococcus sp. JZX-01 could be further used for the bioremediation of oil-polluted soil or seawater in a wide range of temperatures and high salt conditions.     

氮化钨-钨/掺氮有序介孔碳复合材料的制备及其氧还原性能

采用软模板法制备了氮化钨-钨/掺氮有序介孔碳复合材料（WN-W/NOMC）,作为一种高比表面积且价格低廉的阴极氧还原反应催化剂。通过适量添加尿素来改变复合材料中的氮含量,在掺氮量为7%（w/w）时,实验发现材料能够保持完整有序介孔结构,测试其比表面积高达835 m²·g^-1,透射电子显微镜（TEM）测试结果显示其催化颗粒均匀地分散在氮掺杂有序介孔碳载体上。在O₂饱和的0.1 mol·L^-1 KOH溶液中测试了材料的氧还原催化性能（ORR）,显示其起始电位为0.87 V（vs RHE）,极限电流密度为4.49 mA·cm^-2,氧还原反应的转移电子数为3.4,接近于20%（w/w）商业Pt/C的3.8,说明该材料表现出近似4电子的氧还原反应途径。研究结果表明,WN-W/NOMC的催化性能虽然稍弱于商业铂碳（0.99 V,5.1 mA·cm^-2）,但其具有远超铂碳的循环稳定性和耐甲醇毒化能力。     

Synthesis of 1,4-diarylsubstituted 1,3-diynes through ligand-free copper-catalyzed oxidative decarboxylative homocoupling of aryl propiolic acids

An efficient method of ligand-free Cu-catalyzed oxidative decarboxylative homocoupling of aryl propiolic acids was developed. When CuI was employed as the catalyst and I₂ as the oxidant, the decarboxylative homocoupling reaction for C_sp–C_sp bond formation in DMSO underwent smoothly to afford the corresponding 1,4-disubstituted 1,3-dialkynes in good to excellent yields without any organic ligands. This catalytic system was applicable to aryl propiolic acids bearing different steric, electronic, and functional groups.     

阳离子交换在线固相萃取/液相色谱-串联质谱法检测牛奶中14种磺胺药物残留

建立了阳离子交换模式在线固相萃取-液相色谱串联质谱法检测牛奶中14种磺胺药物方法。取5 g样品用15 mL乙腈提取和除蛋白,提取液于50℃氮气吹干后,用1.00 mL 0.2％甲酸溶解,溶解液通过双三元液相色谱用阳离子在线固相萃取柱在线富集净化,2％氨水甲醇/0.2％甲酸(50：50,V/V)洗脱。然后转移至C18色谱柱上进行分离,再用串联四级杆质谱检测。结果表明,14种磺胺类药物在0.1~10μg/kg含量范围内线性良好(r≥0.999);方法的检出限为0.05μg/kg,定量限为0.1μg/kg;方法回收率在60％~90％范围内,批内和批间相对标准偏差都小于10％。本方法较传统固相萃取柱净化法更简捷、经济和稳定。     

基于二茂铁甲酸多重标记的树枝状大分子放大效应的赤霉素分子印迹电化学传感器

建立了多重标记模板分子提高分子印迹电化学传感器灵敏度的方法。通过修饰有大量二茂铁甲酸的树枝状大分子标记的赤霉素与样品中的赤霉素分子之间的竞争反应来进行定量测定。由于实现了二茂铁甲酸的多重标记,故测量电信号得到了明显放大,灵敏度显著提高,线性范围为2.0×10-9~1.0×10-7mol/L,检出限达9.3×10-10mol/L。本方法已成功用于啤酒样品中赤霉素测定。