Effects of antimony on the surface tension of molten silicon

The effect of antimony concentration (C(Sb)/mass%) on the surface tension of molten silicon has been determined with the sessile drop method in the temperature range from 1693 to 1773 K and in the range of the oxygen partial pressure, Po(2), in an Ar atmosphere from 10(-23) to 10(-21) MPa. The results show that the surface tension of molten silicon decreases with increasing Sb concentration in the range of C(Sb)<0.9 mass%, which indicates positive adsorption of Sb in molten silicon and can be fairly described with the Szyszkowski's equation. The maximum decrease rate of surface tension is about 65 mN m(-1) (mass% C(Sb))(-1), and the temperature coefficient of surface tension, (partial differential sigma/ partial differential T)C(Sb), increases with increasing C(Sb). The evaporation of the systems was only observed between the melting points of antimony (904 K) and silicon (1683 K), and the surface tension presents no dependence on measuring time above the melting point of silicon.     

过渡金属配合物催化剂及其分子设计构思的发展与相互作用

讨论了某些不对称合成和α－烯烃定向配位聚合及α－烯烃氢甲酰化的过渡金属配合物向络合催化剂的发展与催化剂分子设计构思的发展及相互促进作用，并藉以说明过渡金属配合物定向络合物催化剂的分子设计已具备向计算机辅助设计发展的科学基础。     

双核钯配合物［Ph_2P（o－C_6H_4CO）PdCl］_2·2CH_2Cl_

合成了双氯桥双核钯配合物［Ｐｈ_２Ｐ（ｏ－Ｃ_６Ｈ_４ＣＯ）ＰｄＣｌ］_２·２ＣＨ_２Ｃｌ_２进行了元素分析、红外光谱表征和晶体结构测定，研究了其催化氢化性能。在３０～８０℃、氢分压１．０～５．０ＭＰａ的范围内。发现该配合物是催化氢化丙烯酸为丙酸的有效催化剂．晶体［Ｐｄ_２Ｃｌ_２（Ｃ_（１９）Ｈ_（１４）ＯＰ）_２］·２ＣＨ_２Ｃｌ_２属Ｐ１空间群，ａ＝０．９３０４（３）ｎｍ，ｂ＝１．０３９２（２）ｎｍ，ｃ＝１．１０６２（３）ｎｍ；ａ＝１０２．７８（２），Ｂ＝９７．３５（３），γ＝９５．２５（２），Ｖ＝１．０２６４ｎｍ~３，Ｍ＝１０３２．１７，２＝１，Ｄｃ＝１．６７０ｇ／ｃｍ~３，ｕ＝１３．６９５ｃｍ~（－１），Ｆ（０００）＝５１２，用１９４５个独立衍射精修结构，最终Ｒ＝０．０３６。     

Effects of mixed H2O‐CH3CN solvents on the rate of hydrazinolysis of N‐phenylphthalimide: Spectral and kinetic evidence for the occurrence of N‐aminophthalimide on the reaction path

Kinetic study on the cleavage of N‐phenylphthalimide (NPhPT) in the presence of 0.05 M NH₂NH₂ and mixed H₂O‐CH₃CN solvents reveals the occurrence of reaction scheme where A, B, C, C₁, An, E, and F represent NPhPT, o‐CO^?₂C₆H₄CONHC₆H₅, o‐CONHNH₂C₆H₄‐ CONHC₆H₅, N‐aminophthalimide, aniline, o‐CO^?₂C₆H₄CONHNH₂, and o‐CONHNH₂C₆H₄‐CONHNH₂, respectively. But, in the presence of either nonbuffered ?0.20 M NH₂NH₂ hydrazine buffer of pH ～7.30–8.26 with total buffer concentration ([Buf]_T) of >0.02 M, further conversion of F to 2,3‐dihydrophthalazine‐1,4‐dione (DHPD) has been detected depending upon the length of the reaction time (t), the values of [Buf]_T, and pH. It has been shown that the rate of conversion of C₁ to F is much faster than that of C to C₁ which is much faster than that of F to DHPD. The reaction step A → C involves general base (GB) catalysis, while step C → C₁ seems to involve specific base–general acid (GA) and GB‐GB catalysis. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 147–161, 2005