液晶显示器用衬垫料的扫描电镜图像

论述了液晶显示器 (LCD)用衬垫料的作用和性能要求。给出了液晶显示器用衬垫料的扫描电镜图像。该图像对观测衬垫料的粒径分布和控制液晶显示器的盒厚均匀程度 ,消除液晶显示器的底色差异具有一定的意义。实验所得图像为从事液晶显示器的工程技术人员提供了清晰的衬垫料图像 ,为排除衬垫料的不均匀因素所造成的液晶屏的质量问题提供了依据。     

Cellulose dimethylphenylcarbamate-bonded carbon-clad zirconia for chiral separation in high performance liquid chromatography.

Porous zirconia particles are very robust material and have received considerable attention as a stationary phase support for HPLC. We prepared cellulose dimethylphenylcarbamate-bonded carbon-clad zirconia (CDMPCCZ) as a chiral stationary phase (CSP) for separation of enantiomers of a set of 14 racemic compounds in normal phase (NP) and reversed-phase (RP) liquid chromatography. Retention and enantioselectivity on CDMPCCZ were compared to those on CDMPC-coated zirconia (CDMPCZ) to see how the change in immobilization method of the chiral selector affects the retention and chiral selectivity. In NPLC, retention was longer and the number of resolved racemates was smaller on CDMPCCZ than on CDMPCZ. However, chiral selectivity factors for some resolved racemates were better on CDMPCCZ than on CDMPCZ. The longer retention on CDMPCCZ is likely due to strong, non-chiral discriminating interactions with the carbon layer on CDMPCZ. In RPLC only two racemates were resolved on CDMPCCZ, but retention times were shorter than, and resolutions were comparable to, those in NPLC, indicating a potential for improving chromatographic performance of the CDMPCCZ column in RPLC with optimized column preparation and separation conditions.     

ICP-AES测定饮用水源中的Cu、Mn、Pb、Cd、Zn

用ICP－AES法同时测定饮用水源中的Cu、Mn、Pb、Cd、Zn等重金属元素，具有基体效应小、测量范围宽等优点。检出限为0．2－4．0μg/L，回收率为91．5％－103．9％，相对标准偏差为0．29％－1．5％，测定密码样与实际样品，结果令人满意。     

Synchronization of Genesio chaotic system via backstepping approach

Backstepping design is proposed for synchronization of Genesio chaotic system. Firstly, the control problem for the chaos synchronization of nominal Genesio systems without unknown parameters is considered. Next, an adaptive backstepping control law is derived to make the error signals between drive Genesio system and response Genesio system with an uncertain parameter asymptotically synchronized. Finally, the approach is extended to the synchronization problem for the system with three unknown parameters. The stability analysis in this article is proved by using a well-known Lyapunov stability theorem. Note that the approach provided here needs only a single controller to realize the synchronization. Two numerical simulations are presented to show the effectiveness of the proposed chaos synchronization scheme.     

Synthesis of a Novel Aromatic Diamino-bridged Bis（β-cyclodextrin） and its Inclusion Complexation with Dyes Molecules

Bridged bis(β-cyclodextrin)s (CDs), as a very important family of CD derivatives, have been known that they can significantly alter the molecular binding ability and selectivity toward a variety of guests in comparison with parent cyclodextrin. Their two…     

Two New Eremophilenolides from Ligularia muliensis

Many Ligularia species have long been used as traditional folk medicine for theirantibiotic, antiphlogistic and antitussive activities1, and were found to be an importantsource of eremophilane. In the course of our search for bioactive sesquiterpenoids, w…     

一些特殊图类乘积的离散度

连通图的离散度是用s(G)来表示的,s(G)=max{ω(G-S)-|S|:ω(G-S)>1,SV(G)}.给出了两个完全图乘积的和一个完全图与路的乘积的离散度.还给出了两个完全图乘积的坚韧度.     

Paper-like Microfibrous Nickel Catalyst for Hydrogen Production via NH3 Decomposition in Fuel Cell Applications

Recently, miniature H2 generator to power fuel cells for portable/micro electronic devices and passenger propulsion has been the focus of intense research activities1-3. One of the strategies is to find simple CO-free H2 production with novel microreactor…     

Microwave synthesis of magnetic Fe3O4 nanoparticles used as a precursor of nanocomposites and ferrofluids

Methods to synthesize magnetic Fe₃O₄ nanoparticles and to modify the surface of particles are presented in the present investigation. Fe₃O₄ magnetic nanoparticles were prepared by the co-precipitation of Fe³⁺ and Fe²⁺, NH₃·H₂O was used as the precipitating agent to adjust the pH value, and the aging of Fe₃O₄ magnetic nanoparticles was accelerated by microwave (MW) irradiation. The obtained Fe₃O₄ magnetic nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). The average size of Fe₃O₄ crystallites was found to be around 8–9 nm. Thereafter, the surface of Fe₃O₄ magnetic nanoparticles was modified by stearic acid. The resultant sample was characterized by FT-IR, scanning electron microscopy (SEM), XRD, lipophilic degree (LD) and sedimentation test. The FT-IR results indicated that a covalent bond was formed by chemical reaction between the hydroxyl groups on the surface of Fe₃O₄ nanoparticles and carboxyl groups of stearic acid, which changed the polarity of Fe₃O₄ nanoparticles. The dispersion of Fe₃O₄ in organic solvent was greatly improved. Effects of reaction time, reaction temperature and concentration of stearic acid on particle surface modification were investigated. In addition, Fe₃O₄/polystyrene (PS) nanocomposite was synthesized by adding surface modified Fe₃O₄ magnetic nanoparticles into styrene monomer, followed by the radical polymerization. The obtained nanocomposite was tested by thermogravimetry (TG), differential scanning calorimetry (DSC) and XRD. Results revealed that the thermal stability of PS was not significantly changed after adding Fe₃O₄ nanoparticles. The Fe₃O₄ magnetic fluid was characterized using UV–vis spectrophotometer, Gouy magnetic balance and laser particle-size analyzer. The testing results showed that the magnetic fluid had excellent stability, and had susceptibility of 4.46×10⁻⁸ and saturated magnetization of 6.56 emu/g. In addition, the mean size d (0.99) of magnetic Fe₃O₄ nanoparticles in the fluid was 36.19 nm.     

Calorimetric studies of the growth of Desulfovibrio desulfuricans in the presence of nitrocellulose

Calorimetric results indicate that nitrocellulose (NC)-induced changes in the metabolism of Desulfovibrio desulfuricans 1388 are caused by both chemical (nitrate) and physical (biofilm formation) factors. Nitrate added to lactate-based culture medium with nitrocellulose competed for the electron flux from lactate and suppressed the bacterial sulfidogenesis and growth. The presence of an insoluble compound (carbon backbone of the polymer) induced the creation of a biofilm-like structure with its own metabolism.