Measuring vitamins and minerals in dietary supplements for nutrition studies in the USA

This article illustrates the importance of having analytical data on the vitamin and mineral contents of dietary supplements in nutrition studies, and describes efforts to develop an analytically validated dietary supplement ingredient database (DSID) by a consortium of federal agencies in the USA. Preliminary studies of multivitamin mineral supplements marketed in the USA that were analyzed as candidates for the DSID are summarized. Challenges are summarized, possible future directions are outlined, and some related programs at the Office of Dietary Supplements, National Institutes of Health are described. The DSID should be helpful to researchers in assessing relationships between intakes of vitamins and minerals and health outcomes.     

The scattering and transmission of elastic waves in quasi-two-dimensional planar waveguides with linear defect boundaries

The influence of linear defect boundaries on the transmission and scattering of elastic waves in quasi-two-dimensional wave-guides is studied using the matching method. A linear defect boundary separating two wave-guide crystalline lattice domains is characterised here by a linear chain of defect masses and by modified elastic constants in the boundary, different from their values in the bulk of the domains. In particular a square lattice is considered to model the domains of the two-dimensional planar wave-guide containing the linear defect. The reflection and transmission probabilities, and the total transmission probabilities are calculated numerically and presented for the scattering processes in a variety of cases. We show that the interaction between the localised modes introduced by the defect boundary and the propagating modes of the system leads to Fano resonances. These resonances shift to higher (lower) frequencies for smaller (larger) defect masses, and for the same mass as function of the angle of the incident wave. Other spectral features shown to exist are due to interference effects especially at oblique incidence and when modifying the boundary elastic constants. Received 8 November 1999 and Received in final form 14 January 2000     

Effects of crossed columnar defects on vortex pinning in Bi2Sr2CaCu2O8

To investigate the existence of a splay effect in Bi₂Sr₂CaCu₂O₈ (Bi-2212), vortex pinning has been studied in different configurations of strongly inclined columnar defects (75 from the c axis), installed by heavy-ion irradiation. It is shown that the symmetry of the track setting with respect to the field direction is a more influent parameter than the presence of a dispersion in the track directions. We claim that the enhanced pinning efficiency which is observed in some splayed configurations of columnar defects in Bi-2212 can be interpreted without invoking a splay effect. Received 27 December 1999     

Binary relations as lattice isomorphisms

Summary In 1963, Zaretskiį established a one-to-one correspondence between the setB _X of binary relations on a set X and the set of triples of the form (W, ϕ, V) where W and V are certain lattices and ϕ: W→V is an isomorphism. We provide a multiplication for these triples making the Zaretskiį correspondence a semigroup isomorphism. In addition, we consider faithful representations ofB _X by pairs of partial transformations and also as the translational hull of its rectangular relations. Using these triples, we study idempotents, regular and completely regular elements and relationsH-equivalent to some relations with familiar properties such as reflexivity, transitivity, etc. Entrata in Redazione il 14 aprile 1998.     

Fabrication of carbon/silica hybrid materials using cationic polymerization and the sol-gel process

Silica particles with different morphology have been functionalized with carbon shells by different synthetic procedures. In the key step, the bare silica particles are functionalized by a specific cationic surface polymerization with furfuryl alcohol (FA). The polyfurfuryl alcohol (PFA)/silica hybrid particles have been also post-functionalized with maleic anhydride (MSA) by a Diels Alder reaction. Simultaneously occuring cationic polymerization of FA and sol-gel process with TEOS has been used for producing interpenetrating carbon-silica hybrid materials. The thermal transformation of the PFA component on silica into the carbon phase has been carried out under argon atmosphere in a temperature range from 700°C to 900°C. The influence of the former morphology of the silica on the homogenity of the resulting carbon layer is shown by zetapotential measurements and electron microscopic investigations.     

Analysis of optical characteristics of holey photonic crystal devices with the extended coupled-mode formalism

Presented here is a new approach for analysis of the so-called holey photonic crystals—a class of electro-optical components, in which periodicity of air holes in dielectric media is used for confinement of light. This class includes several kinds of microstructured fibers, semiconductor lasers etc. Accurate evaluation of optical characteristics of those devices is usually a complicated problem due to the large dimensions and the fine structure of their refractive index distribution. Furthermore, usually, only numerical solutions for this class of optical components are available. The overwhelming majority of the physical models, suitable for analysis of holey photonic devices, proceed from the “natural” assumption: the devices are considered as arrays of air holes, surrounded by dielectric material. In this work we propose another model. Namely, we treat them as arrays of dielectric spots (waveguides), embedded in the air (cladding material). This model allows utilization of the extended coupled-mode theory (a relatively new approach designed for analysis of infinite arrays of coupled waveguides and previously considered inapplicable to holey optical components) for calculations of the latter. In this sense, we present a new method for analysis of holey photonic crystals. On the one hand, our method allows analytical evaluation of some optical characteristics of holey optical components (such as the number of photonic bands and bandwidth). On the other hand, accurate numerical computation of the photonic band structure of the holey photonic devices, incorporating a large number of holes, can be done with this technique on a timescale of several minutes.     

Study of interfacial reactions and phase stabilization of mixed Sc, Dy, Hf high-k oxides by attenuated total reflectance infrared spectroscopy

Grazing angle attenuated total reflectance Fourier transform infrared spectroscopy is applied to study ultrathin film Hf⁴⁺, Sc³⁺ and Dy³⁺oxides, due to its high surface sensitivity. The (multi)metal oxides studied, are of interest as high-k dielectrics. Important properties affecting the permittivity, such as the amorphous or crystalline phase and interfacial reactions, are characterized.Dy₂O₃ is prone to silicate formation on SiO₂/Si substrates, which is expressed in DyScO₃ as well, but suppressed in HfDyO_x. Sc₂O₃, HfScO_x and HfO₂ were found to be stable in contact with SiO₂/Si. Deposition of HfO₂ in between Dy₂O₃ or DyScO₃ and SiO₂, prevents silicate formation, showing a buffer-like behavior for the HfO₂.Doping of HfO₂ with Dy or Sc prevents monoclinic phase crystallization. Instead, a cubic phase is obtained, which allows a higher permittivity of the films. The phase remains stable after anneal at high temperature.     

Automated phase correction via maximization of the real signal

Due to improved quantification capabilities and enhanced signal-to-noise ratio (SNR), phase-corrected real reconstruction in magnetic resonance imaging is superior to the common magnitude reconstruction, especially at low SNR. This requires the development of an automated phase-correction algorithm. Existing methods are not well suited for multiple unconnected regions of very low SNR. For this situation, a method based on the real-signal maximization is implemented, in which the experimental image phase is approximated by a three-dimensional polynomial of up to third order. The presented implementation was successfully applied to data originating from different samples and pulse sequences.     

Ultra-low background measurements of decayed aerosol filters

Aerosol samples collected on filter media were analyzed using HPGe detectors employing varying background-reduction techniques in order to experimentally evaluate the opportunity to apply ultra-low background measurement methods to samples collected, for instance, by the Comprehensive Test Ban Treaty International Monitoring System (IMS). In this way, realistic estimates of the impact of low-background methodology on the sensitivity obtained in systems such as the IMS were assessed. The current detectability requirement of stations in the IMS is 30 μBq/m³ of air for ¹⁴⁰Ba, which would imply ~10⁶ fissions per daily sample. Importantly, this is for a fresh aerosol filter. One week of decay reduces the intrinsic background from radon daughters in the sample allowing much higher sensitivity measurement of relevant isotopes, including ¹³¹I. An experiment was conducted in which decayed filter samples were measured at a variety of underground locations using Ultra-Low Background (ULB) gamma spectroscopy technology. The impacts of the decay and ULB are discussed.     

Quantifying the dynamics of flow within a permeable bed using time-resolved endoscopic particle imaging velocimetry (EPIV)

This paper presents results of an experimental study investigating the mean and temporal evolution of flow within the pore space of a packed bed overlain by a free-surface flow. Data were collected by an endoscopic PIV (EPIV) technique. EPIV allows the instantaneous velocity field within the pore space to be quantified at a high spatio-temporal resolution, thus permitting investigation of the structure of turbulent subsurface flow produced by a high Reynolds number freestream flow (Re _s in the range 9.8?×?10³?C9.7?×?10⁴). Evolution of coherent flow structures within the pore space is shown to be driven by jet flow, with the interaction of this jet with the pore flow generating distinct coherent flow structures. The effects of freestream water depth, Reynolds and Froude numbers are investigated.