样品价态对激光气化产生Cu/Cl团簇的组成和稳定性的影响

研究团控的形成条件、形成机理是目前团簇科学中的一个热点领域［‘］．产生气相团簇的方法主要有Knudsen高温炉扩散法、粒子溅射法、激光气化／分子束法、直接激光气化法·因为不需要另加缓冲气体，直接激光气化法【刀具有对体系真空要求较低，装置简单，容易和飞行时间质谱结     

Synthesis of oligo(p-phenylene vinylene)-porphyrin-oligo(p-phenylene vinylene) triads as antenna molecules for energy transfer

The oligo(p-phenylene vinylene)-porphyrin-oligo(p-phenylene vinylene) (P-OPVn, n=2, 4, where n is the number of phenyl rings) and the complex with Zn²⁺ based on P-OPVn were synthesized for investigating their photophysical properties via UV-vis, voltammetry, steady-state and time-resolved fluorescence spectra. In these molecules two OPV moieties as energy donors were linked to porphyrin center by virtue of Wittig reaction. The detailed studies of photophysical properties indicate that OPV group can act as an antenna unit for effective intramolecular energy transfer.     

采用循环伏安与Tafel曲线比较不同阳极的电催化性能

采用循环伏安和Tafel曲线两种方法评价了Pt电极、钛基二氧化钌电极(Ti/RuO2)及钛基二氧化锡电极(Ti/SnO2)的电催化氧化性能.结果表明,在500 mg/L的苯酚溶液中,Pt,Ti/RuO2和Ti/SnO2电极氧化苯酚的峰电位依次为0.93,0.95和1.40 V(vsAg/AgCl).Tafel曲线表明,三种电极析氧过电位的顺序依次是Ti/RuO2相似文献   

具有自修复能力的聚合物材料

各项性能已经达到工程材料指标要求的聚合物材料，在使用过程中不可避免地会产生裂纹，进而在使用过程中包藏着隐患，直至丧失使用价值。裂纹的早期修复，特别是自修复是一个现实而重要的问题。本文介绍了两类修复机制，即共价键与非共价键愈合，重点分析了近年来按共价键机理愈合、具有自修复能力的聚合物材料的研究成果、优缺点及发展前景。     

The growth of perylene on Ru(0001)

The structure of perylene adsorbed on Ru(0001) surface has been studied by ultraviolet photoemission spectroscopy (UPS) and low-energy electron diffraction. An ordered p(4x4) structure is observed from a monolayer (about 4 A thickness) of the perylene on Ru(0001) surface. UPS measurements show the molecular features, from the perylene multiplayer, between 2 and 10 eV below the Fermi level. Angle-resolved ultraviolet photoemission spectroscopy measurements suggest that the perylene molecular plane is parallel to the substrate. Temperature dependent UPS measurements show that the perylene multilayer is stable on Ru(0001) surface up to 125 degrees C. The desorption of the multilayer and the decomposition of the monolayer are observed above 125 degrees C.     

亚硝酸甲酯分子在440nm附近的激光光解

近年来亚硝酸甲酯分子（CHa0NO）的光解动力学研究十分活跃｛‘5］，主要集中在紫外激光的单光子解离的机理，光解过程的矢量相关性质和光解产物的态分布．CH30NO分子的解离能D。（CH30－NO）＝174kJ·mol‘，若单从能量上看，人＜689。的光就能使其解离，但人＞400urn的光解离研究还未见报导．＊H30＊0分子在人＞40onm的强激光场下是充电离还是先解离，是单光子解离还是多光子解离，以及通过哪个电子态解离都不清楚．时间飞行质谱不仅具有质量分辨率高、范围宽，而且响应快，因此适合做光解光电离过程初生态产物的探测．特别是时间飞…     

Efficient one‐pot synthesis of water‐compatible and photoresponsive molecularly imprinted polymer nanoparticles by facile RAFT precipitation polymerization

A facile, general, and highly efficient one‐pot approach to obtain azobenzene (azo)‐containing molecularly imprinted polymer (MIP) nanoparticles with photoresponsive template binding and release properties in aqueous media is described, which involves the combined use of hydrophilic macromolecular chain transfer agent‐mediated reversible addition‐fragmentation chain transfer precipitation polymerization and easily available water‐insoluble azo functional monomers. The resulting azo‐containing MIPs were characterized with dynamic laser scattering (DLS), SEM, FTIR, static contact angle and water dispersion studies, and equilibrium binding experiments. They have proven to be nanoparticles (their diameters being around 104–397 nm, as determined by DLS in methanol) with surface‐grafted hydrophilic polymer brushes and exhibit excellent pure water‐compatible template binding properties. Moreover, obvious photoregulated template binding behaviors were observed for such azo‐containing MIP nanoparticles, which led to their largely accelerated template release in the aqueous media under the UV light irradiation. Furthermore, the general applicability of the strategy was also demonstrated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1941–1952     

Properties of cat-eye modulating retro-reflector and its application with piezoelectric transducer

Piezoelectric cat-eye modulating retro-reflector (MRR) is the core component of an acousto-optic retro-identification system. The influence of the optical parameters (link distance l, lens focal length f and the detector diameter r) to the cat-eye effect was analyzed theoretically and experimentally. A piezoelectric cat-eye retro-identification (PCERI) system was built, and an information transmission ratio of 2 kHz was achieved which can satisfy an access control system.     

α‐Diamine Nickel Catalysts with Nonplanar Chelate Rings for Ethylene Polymerization

A series of novel α‐diamine nickel complexes, (ArNH‐C(Me)‐(Me)C‐NHAr)NiBr₂, 1 : Ar=2,6‐diisopropylphenyl, 2 : Ar=2,6‐dimethylphenyl, 3 : Ar=phenyl), have been synthesized and characterized. X‐ray crystallographic analysis showed that the coordination geometry of the α‐diamine nickel complexes is markedly different from conventional α‐diimine nickel complexes, and that the chelate ring (N‐C‐C‐N‐Ni) of the α‐diamine nickel complex is significantly distorted. The α‐diamine nickel catalysts also display different steric effects on ethylene polymerization in comparison to the α‐diimine nickel catalyst. Increasing the steric hindrance of the α‐diamine ligand by substitution of the o‐methyl groups with o‐isopropyl groups leads to decreased polymerization activity and molecular weight; however, catalyst thermal stability is significantly enhanced. Living polymerizations of ethylene can be successfully achieved using 1 /Et₂AlCl at 35 °C or 2 /Et₂AlCl at 0 °C. The bulky α‐diamine nickel catalyst 1 with isopropyl substituents can additionally be used to control the branching topology of the obtained polyethylene at the same level of branching density by tuning the reaction temperature and ethylene pressure.     

Preparation and solution properties of a novel cationic hydrophobically modified polyacrylamide for enhanced oil recovery

Abstract

A novel cationic water-soluble monomer allyldimethylisooctylammonium bromide (ADIAB) containing a short-chain alkane was synthesized successfully. This monomer was copolymerized with acrylamide and sodium acrylate to produce hydrophobically modified polyacrylamide (HMPAM) using solution polymerization without surfactants. The structures of monomer ADIAB and HMPAM were characterized with infrared spectroscopy and nuclear magnetic resonance spectroscopy. Influence of preparation condition on viscosities of products was studied. The aqueous solution viscosity of the terpolymer was also investigated as functions of concentration, temperature and salinity. The results showed that when the temperature exceeds the 60?°C and NaCl concentration exceeds about 2000?mg/L, the temperature and salt tolerance characters of terpolymer were demonstrated. The enhanced oil recovery tests were initially carried out using homogeneous sandpack models.