纳米TiO_2改性蚕丝丝素蛋白膜的研究

用溶胶凝胶法制备纳米TiO2改性再生蚕丝丝素蛋白膜.该丝素膜机械强度提高,在水中溶失率下降.UV、AFM、SEM测试的结果表明,丝素中纳米TiO2粒径约为80 nm,纳米粒子在丝素膜中分布均匀;XRD、FTIR测试结果表明,纳米TiO2的加入,可使改性丝素膜的结晶结构从SilkⅠ向SilkⅡ转化,其结晶度也随之提高;TGA测试表明改性丝素膜的热转变温度比纯丝素膜有所改变.     

用TREF方法分离聚烯烃共混物

用ＴＲＥＦ方法分离聚烯烃共混物徐君庭，封麟先，杨士林（浙江大学高分子科学与工程学系，杭州，３１００２７）关键词升温淋洗分级，聚烯烃，共混物升温淋洗分级（ＴＲＥＦ）方法是８０年代发展起来的，它按结晶度将聚合物分级［１］，目前主要用于聚烯烃的分级［２，３...     

四氢呋喃与环氧氯丙烷共聚合的研究

<正> 晃玉等曾以BF_3-二元醇(DO)引发四氢呋喃(THF)与环氧氯丙烷(ECH)共聚合,用所得共聚醚制成嵌段聚醚聚氨酯,与用THF均聚醚或THF-环氧丙烷(PO)共聚醚为软段的聚氨酯相比,分别在低温性能及强度上有明显改进.且由于引入氯甲基侧基可作进一步接枝共聚改性。但用BF_3-DO为引发剂很难制得不含环聚体的共聚醚,     

光同时诱导水中Cr(Ⅵ)的还原与橙黄Ⅱ的氧化

光同时诱导水中Cr(Ⅵ)的还原与橙黄Ⅱ的氧化;染料;橙黄Ⅱ;Cr(Ⅵ);光还原;光降解     

Synthesis, Crystal Structure and Electrochemistry Properties of a (N,N'-Ethylene-bis(salicylaldiminato)) Nickel(Ⅱ) Complex, [Ni2(salen)2]·NCS-NH4

A new Ni(Ⅱ) complex [Ni2(salen)2]·(NCS)·NH4 (salen = N,N'-bis(salicylidenea-mino)ethanato) has been prepared and structurally characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. It crystallizes in the orthorhombic system, space group Pbca with a = 16.8725(13), b = 19.0046(15), c = 20.0583(16) (A), Z = 8, V = 6431.8(9) (A)3, C33H32N6Ni2O4S1, Mr= 726.13, Dc = 1.500 g/cm3, F(000) = 3008, μ = 1.284 mm-1, the final R = 0.0394 and wR = 0.0767 for 4449 observed reflections with Ⅰ＞2σ(Ⅰ). The complex involves a N,N'-ethylene-bis(salicylaldiminato) Schiff base, an isothiocyanato anion and an ammonium cation. The nickle(Ⅱ) ion adopts a distorted square coordination geometry with N2O2 set of Schiff base ligand. The complexes are linked into a dimmer via intermolecular hydrogen bonds and the [Ni(salen)] moieties are connected together to form a 2-D layer structure by intermolecular N-H…O hydrogen bonds and π-π stacking. Cyclic-voltammetry method was used to characterize electrochemically the complex.     

A Home-made Simple Set-up for Measurement of Electrochemical Surface Tension Spectrum on a Mercury Drop Electrode

A setup for recording surface tension curves at a mercury drop during potential scanning is designed based on photo-sensitive detection system. Surface tension spectrum at Hg drop can be recorded by voltammetric study. A Yb(III)-NO2- catalytic reduction system was used for characterization. The simple, sensitive technique can be expected to provide fresh information on molecular interactions at electrode surfaces.     

锂离子电池正极材料LiMn2O4的合成与晶体结构（英）

Spinel LiMn₂O₄ powders were prepared using two-step synthesis method consisting of solid-state reaction method and citrate modified sol-gel method. The effects of the calcination temperature and the Li/Mn ratio of raw materials were studied on the physicochemical and electrochemical properties of the spinel LiMn₂O₄ powders, such as crystallinity, lattice constant and density. The title compound was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Polycrystalline LiMn₂O₄ powers calcined at 750 ℃ were found to be composed of very uniformly-sized microcrystal with an average particle size of 300 nm. The improvement in electrochemical properties was mainly attributed to the process of re-grinding by absolute alcohol.     

Ab initio study on the mechanism of reaction HNCO+NH_2

Ab initio UMP2 and UQCISD(T) calculations, with 6-311G** basis sets, were performed for the titled reactions. The results show that the reactions have two product channels: NH2+ HNCO→NH3+NCO (1) and NH2+HNCO-N2H3+CO (2), where reaction (1) is a hydrogen abstraction reaction via an H-bonded complex (HBC), lowering the energy by 32.48 kJ/mol relative to reactants. The calculated QCISD(T)//MP2(full) energy barrier is 29.04 kJ/mol, which is in excellent accordance with the experimental value of 29.09 kJ/mol. In the range of reaction temperature 2300-2700 K, transition theory rate constant for reaction (1) is 1.68 × 1011- 3.29 × 1011 mL · mol-1· s-1, which is close to the experimental one of 5.0 ×1011 mL× mol-1· s-1 or less. However, reaction (2) is a stepwise reaction proceeding via two orientation modes, cis and trans, and the energy barriers for the rate-control step at our best calculations are 92.79 kJ/mol (for cis-mode) and 147.43 kJ/mol (for trans-mode), respectively, which is much higher than     

Synthesis and Crystal Structure of N-cyclopropyl-9 -（3,4-dicholophenyl）- 1,2,3,4,5,6,7,8,9,10-decahydroacridine -1,8-dione under Microwave Irradiation

1 INTRODUCTION aryl or methyl group to the nitrogen atom of these compounds leads to enhanced activities of fluo- A lot of natural and synthetic compounds con- rescence[7, . Since the pyridine scaffold is included 8] taining acridine skeletons display interesting biolo- in decahydroacridine-1,8-dione, a question is whether gical and physical activities[1]. Acridinedione, for the same modification on the nitrogen atom of de- example, has been identified as antimalarial and cahydroacridine-1…