在SQUID心磁测量中基于奇异值分解和自适应滤波的噪声消除法

采用矩阵奇异值分解(singular value decomposition, SVD)的方法，对高温射频超导量子干涉仪(HTc rf-SQUID)采集到的单通道心磁信号进行处理.证明了对于近似周期性的心磁信号，在无参考噪声的情况下矩阵奇异值分解的方法与自适应窄带陷波相结合有较好的消除广谱噪声的效果. 关键词： 高温射频超导量子干涉仪 心磁信号 奇异值分解 噪声消除     

几种陆用惯性自寻北方案的比较

介绍几种目前广泛应用于军事及民用工业领域的高精度自寻北方案,同时讨论并分析了这些方案的精度和误差补偿方法,提出在兵器领域尤其是在陆用车辆上的适用性等问题。     

作物覆盖条件下土壤中水热分布的稳态数值比较

本文应用非饱和多孔介质中传热传质的数学模型,考虑到作物根系和冠层的影响,对稳态情况下圆柱形士壤床中的水热分布进行了数值计算模拟。在不同环境条件下对土壤中的水热分布也进行了模拟计算。同时,在相同环境条件下对有作物覆盖的土壤床和无作物覆盖的土壤床中的水热分布也进行了模拟比较。文中数值模拟的结果较好地反映了实际情况。     

Nd：YAG激光器中的自锁模

本文报道在Nd:YAG激光器中首次获得的自锁模脉冲序列.自锁模是由于Nd:YAG棒中的自相位调制引起的.在主被动对撞锁模运转情况下,自锁模对脉冲波形有较大的影响.     

An Economical Magnetocardiogram System Based on High-To SQUIDs

An economical magnetocardiogram （MCG） system is built in our laboratory. It mainly consists of a MCG data acquisition stage equipped with two high-To superconducting quantum interference device （SQUID） magnetometers, a data processing stage with digital filtering and a one-layer μ-metal magnetically shielded room in conjunction with a high-Tc SQUID based active compensation. Experimental results show that a noise level of pico-tesla in MCG profiles, which is necessary for clinical applications, may be achieved with the system. Moreover, stable and convenient operations of the system are demonstrated with simulating MCG measurements.     

Carathéodory's method for a class of second order differential equations on the half-line

The method of equivalent variational methods, originally due to Carathéodory for free problems in the calculus of variations is extended to investigate boundary value problems for a class of second order differential equations on the half-line. Some applications are presented to illustrate the potential of this method.     

Parton-hadron duality in event generators

The validity of local parton-hadron duality within the framework of HERWIG and JETSET event generators is investigated. We concentrate one ⁺ e ^– annihilations in LEP 2 energy range as these interactions provide theoretically the cleanest condition for the discussion of this concept. We conclude that the concept of local parton-hadron duality is not valid in either of the two generators considered.     

预测气吹精密播种机排种质量的一种简易方法

通过对气吹式精密播种机田间试验资料的相关分析，发现合格指数Ａ与｜Ｄ－Ｍ｜（重播指数与漏播指数之差的绝对值）之间里极显著负相关（ｒ＝－０．９３１２）。在对数据作进一步回归分析的基础上，本文建立了一套“由排种粒数预测排种质量”的方法。     

PHOTOPHYSICAL STUDIES ON ORGANIC COMPOUNDS——TIME-RESOLVED TRANSIENT ABSORPTION SPECTRA STUDIES ON TRIPHENYLAMINE IN VARIOUS SOLVENTS

The transient absorption spectra of triphenylamine (TPA) in various solvents have beeninvestigated by the methods of nanosecond laser photolysis. The lifetimes of TPA were meas-ured. In hexane and ethanol, the transient absorptions of triplet state and triplet excimer ofTPA were observed. However, the transient absorptions of the TPA cation radical was alsoobserved in acetonitrile besides that of the triplet TPA monomer and excimer. According tothe experimental facts, the transient photophysical mechanism of TPA in various solvents hasbeen proposed.     

Effect of carbon content on the microstructure and the cracking susceptibility of Fe-based laser-clad layer

The laser cladding of Fe-based alloys on a medium carbon steel substrate was performed using a CO₂ laser and Ar shielding gas that was blown into a molten pool. The microstructure and cracking susceptibility of the laser-clad layers were studied in terms of carbon additions. Results show that the small change of the carbon content in the alloy powders can obviously change the microstructure and properties of the layers. When the carbon content is in the range of 0.3–0.4 wt.%, the decrease of the carbon content in alloy powders will increase the hardness and toughness of the layers simultaneously under the same process parameters. As a result, crack-free coatings with high hardness can be obtained. As the carbon content increases from 0.2 wt.% to 0.4 wt.%, the segregation ratio of chromium increases, while the segregation ratios of nickel, manganese, and silicon first decrease and then increase. At the same time, a new designing principle concerning the composition and microstructure has been put forward, and the principal mechanisms of strengthening and toughening of the layers are fine-grain strengthening and low carbon martensitic phase transformation strengthening.