Competitive and noncompetitive phage immunoassays for the determination of benzothiostrobin

Twenty-three phage-displayed peptides that specifically bind to an anti-benzothiostrobin monoclonal antibody (mAb) in the absence or presence of benzothiostrobin were isolated from a cyclic 8-residue peptide phage library. Competitive and noncompetitive phage enzyme linked immunosorbent assays (ELISAs) for benzothiostrobin were developed by using a clone C3-3 specific to the benzothiostrobin-free mAb and a clone N6-18 specific to the benzothiostrobin immunocomplex, respectively. Under the optimal conditions, the half maximal inhibition concentration (IC₅₀) of the competitive phage ELISA and the concentration of analyte producing 50% saturation of the signal (SC₅₀) of the noncompetitive phage ELISA for benzothiostrobin were 0.94 and 2.27 ng mL⁻¹, respectively. The noncompetitive phage ELISA showed higher selectivity compared to the competitive. Recoveries of the competitive and the noncompetitive phage ELISAs for benzothiostrobin in cucumber, tomato, pear and rice samples were 67.6–119.6% and 70.4–125.0%, respectively. The amounts of benzothiostrobin in the containing incurred residues samples detected by the two types of phage ELISAs were significantly correlated with that detected by high-performance liquid chromatography (HPLC).     

The Aerobic Oxidation and C=C Bond Cleavage of Styrenes Catalyzed by Cerium(IV) Ammonium Nitrate (CAN)

The CAN‐catalyzed aerobic oxidation severed the C=C bond selectively through the single electron transfer mechanism, giving a green method to decompose olefins. Compared with the literature reported examples, this method required simple catalyst, cheap, abundant and clean oxidant and was very safe to operate due to the mild conditions.     

双功能[Sn,Al]-Beta分子筛一步催化葡萄糖生成5-羟甲基糠醛

以部分脱铝的Beta分子筛为母体,采用同晶置换法将Sn植入骨架制备双功能[Sn,Al]-Beta分子筛,并应用于葡萄糖一步催化生成5-羟甲基糠醛(5-HMF)反应中.样品中Sn与Al的含量通过酸洗的浓度和酸洗的时间以及SnCl4处理的时间来控制.由于骨架中有与Al相关为B酸位,和Sn相关的L酸位,[Sn,Al]-Beta可作为一种双功能的固体酸催化剂.优化了[Sn,Al]-Beta催化葡萄糖一步催化生成5-HMF的反应参数,在最优Sn/Al比条件下,葡萄糖转化率为60.0%,5-HMF选择性为62.1%.     

Chiral separation abilities of homogeneously synthesized cellulose 3,5-dimethylphenylcarbamates: Influences of degree of substitution and molecular weight

A series of cellulose 3,5-dimethylphenylcarbamates(CDMPCs) with different degrees of substitution(DS) and degrees of polymerization(DP) were homogeneously synthesized in 1-allyl-3-methylimidazolium chloride(Amim Cl). Then, the CDMPCs were coated on silica gel and used as chiral stationary phases(CSPs), and their chiral recognition abilities for seven racemates were evaluated by high performance liquid chromatography. The results showed that DS and DP of CDMPCs had a great influence on chiral recognition abilities of the CSPs. The CSPs with the DS ≈ 1 gives a low chiral recognition to most racemates. On the contrast, the CSPs with the DS ? 2 exhibited high chiral separation abilities. For example, six racemates could be separated on the CSP with CDMPC of DS ≈ 2(CSP-2). Especially, for the enantioseparation of 1-(2-naphthyl) ethanol and Tr?ger's base, CSP-2 gave the highest separation ability in all of CSPs. On the other hand, when the DP of cellulose was in a range from 39 to 220, the chiral separation abilities of CDMPCs increased as the DP increased. This work demonstrates that the structure of cellulose esters such as DS and DP has important effect on their chiral separation ability, and therefore provides a practical method to design and prepare desirable CSPs for different racemates.     

Prevention of postoperative tendon adhesion by biodegradable electrospun membrane of poly(lactide-co-glycolide)

An electrospun poly(lactide-co-glycolide)(PLGA) membrane was prepared and used to perform the anti-adhesion of Achilles tendon. Throughout the experiments, the membrane showed an appropriate degradation rate, and the p H values of degradation media were maintained at around 7.4. Simultaneously, the excellent biocompatibility of the membrane in vitro and in vivo was confirmed by live/dead and histopathological analyses. Meanwhile, the membrane can reduce tendon adhesion significantly and promote functional recovery effectively. The encouraging results were further demonstrated by hematoxylin and eosin(HE), and Masson's trichrome stainings, and type I collagen immunohistochemical analysis. It was concluded that the model treated with the electrospun PLGA membrane was significantly better with respect to the adhesion prevention and tissue repair than that without treatment. Considering the results of degradation and adhesion prevention efficacy, the electrospun PLGA membrane would be a great candidate for the prevention of postoperative tendon adhesion.     

Morphological and dimensional control via assembly of polyaniline crystals

A facile and general route to a new generation of polyaniline(PANI)-citric acid(CA) crystals such as 2D nanoplates, 2D nanosheets and 3D microrods self-assembled by the π-π stacking interaction is reported. Dramatic, 3D rectangular shaped microrods and 2D nanosheets are single crystals indicated by SAED patterns and HRTEM images. Moreover, the method does not depend on any specific equipment or heating, cooling and complex procedures. The novel polyaniline crystals will be useful for next generation organic electronics such as nano-transistors.     

杂多酸离子液体催化燃油萃取氧化脱硫性能研究

本文首次将一系列含有不同酸性咪唑阳离子和不同杂多酸阴离子的杂多酸离子液体[C4mim]3PW12O40、[COOH-Cmim] 3PW12O40、[SO3H-C3mim]3PW12O40、[SO3H-C3mim]3PMo12O40和[SO3H-C3mim]4 SiW12O40作为催化剂,乙腈为萃取剂,H2O2为氧化剂,用于催化含二苯并噻吩、苯并噻吩及噻吩模型油的萃取氧化脱硫研究中.实验结果显示,杂多酸离子液体催化燃油脱硫性能不仅与阳离子的酸性强弱有关,而且与阴离子结构密切相关.阳离子的催化活性顺序为:[SO3H-C3mim]+＞[COOH-Cmim]+＞[C4mim]+;阴离子的催化活性顺序为PW12O403-＞ PMo12O403-＞ SiW12O404-.其中[SO3H-C3 mim]3 PW12O40催化活性最高,在60℃反应40min的条件下,二苯并噻吩的转化率约为100％,催化不同硫化物的转化率为:二苯并噻吩＞苯并噻吩＞噻吩.此外,该杂多酸离子液体循环使用5次催化活性仅略有下降.     

High capacity and cycling stability of poly(diaminoanthraquinone) as an organic cathode for rechargeable lithium batteries

Poly(1,5‐diaminoanthraquinone) is synthesized by oxidative polymerization of diaminoanthraquinone monomers and investigated as an organic host for Li‐storage reaction. Benefiting from its high density of redox‐active, Li⁺‐associable benzoquinone groups attached to conducting polyaniline backbones, this polymer undergoes its cathodic reaction predominately through Li⁺‐insertion/extraction processes, delivering a very high reversible capacity of 285 mAh g^?1. In addition, the PDAQ polymer cathode exhibits an excellent rate capability (125 mAh g^?1 at 800 mA g^?1) and a considerable cyclability with a capacity retention of ～160 mAh g^?1 over 200 cycles, possibly serving as a sustainable, high capacity Li⁺ host cathode for Li‐ion batteries. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 235–238     

Graphene Quantum Dots Assembled with Metalloporphyrins for “Turn on” Sensing of Hydrogen Peroxide and Glucose

Noncovalent and multifunctional hybrids have been generated via π–π stacking and electrostatic interactions by combining the nanometer‐scale graphene structure of graphene quantum dots (GQDs) with Fe^III 5,10,15,20‐tetrakis(1‐methyl‐4‐pyridyl)porphine (FeTMPyP). The inner filter effect (IFE) of FeTMPyP on the GQDs results in substantial PL quenching of the GQDs. The quenched PL of GQDs by the FeTMPyP can be switched back “on” in response to the reaction between FeTMPyP and H₂O₂, which causes rupture of the cyclic tetrapyrrolic nucleus with consequential loss of iron from FeTMPyP, and then proceeds further to produce colorless dipyrroles and monopyrroles. This “turn on” system can be applied for simple and convenient H₂O₂ sensing and can be further extended to the detection of glucose in combination with the specific catalytic effect of glucose oxidase (GOx) through the oxidation of glucose and formation of H₂O₂. Because of the inherent synthetic control available for the design of metalloporphyrins, the GQDs‐based optical sensing approach described here has the potential to be highly versatile for other target analytes.     

Thermal and environmental stability of poly(4-ethynyl-p-xylylene-co-p-xylylene) thin films

The aim of this paper was to test the thermal and environmental stability of poly(4-ethynyl-p-xylyleneco-p-xylylene) thin films prepared by chemical vapor deposition(CVD) and to optimize the reaction conditions of the polymer.Fourier transformed infrared spectroscopy(FTIR),thermogravimetric analysis(TGA) and fluorescence microscopy were employed to investigate the stability of the reactive polymer coatings in various environmental conditions.Chemical reactivity of the thin films were then tested by Huisgen 1,3-dipolar cycloaddition reaction(‘‘click' reaction).The alkyne functional groups on poly(4-ethynyl-p-xylylene-co-p-xylylene) thin films were found to be stable under ambient storage conditions and thermally stable up to 100 8C when annealed at 0.08 Torr in argon.We also optimized the click reaction conditions of azide-functionalized molecules with poly(4-ethynyl-p-xylylene-co-p-xylylene).The best reaction result was achieved,when copper concentration was 0.5 mmol/L,sodium ascorbate concentration to copper concentration was 5:1.In contrast,the azide concentration and temperature had no obvious effect on the surface reaction.