杂多酸离子液体催化燃油萃取氧化脱硫性能研究（英文）

本文首次将一系列含有不同酸性咪唑阳离子和不同杂多酸阴离子的杂多酸离子液体[C4mim]3PW12O40、[COOH-Cmim]3PW12O40、[SO3H-C3mim]3PW12O40、[SO3H-C3mim]3PMo12O40和[SO3H-C3mim]4SiW 12O40作为催化剂,乙腈为萃取剂,H2O2为氧化剂,用于催化含二苯并噻吩、苯并噻吩及噻吩模型油的萃取氧化脱硫研究中。实验结果显示,杂多酸离子液体催化燃油脱硫性能不仅与阳离子的酸性强弱有关,而且与阴离子结构密切相关。阳离子的催化活性顺序为:[SO3H-C3mim]+[COOH-Cmim]+[C4mim]+;阴离子的催化活性顺序为PW3-12O3-40PMo12O40SiW 12O4-40。其中[SO3H-C3mim]3PW12O40催化活性最高,在60℃反应40min的条件下,二苯并噻吩的转化率约为100%,催化不同硫化物的转化率为:二苯并噻吩苯并噻吩噻吩。此外,该杂多酸离子液体循环使用5次催化活性仅略有下降。     

磷钼杂多酸离子液体催化氧化脱硫

 合成了新型的磷钼杂多酸离子液体 [hmim]3PMo12O40, 并将其用于室温离子液体 1-甲基咪唑四氟硼酸盐 ([hmim]BF4) 为溶剂的模拟油品氧化脱硫反应. 结果表明, 在温和的反应条件下, 过氧化氢与硫摩尔比为 4:1 时, 二苯并噻吩脱硫率为 90%, 二苯硫醚、苯甲硫醚和二乙硫醚的脱除率可达 100%. 离子液体催化体系循环使用 4 次后, 脱硫率没有明显下降.     

色谱法研究杂多酸I: 反相高效液相色谱法分离钨杂多酸

以CH3-OH-磷酸缓冲溶液作流动相,研究反相高效液体色谱法直接分离几种钨的杂多酸离子:K8SiW11O39,K3PW12O40,K4SiW12O40,K3PW12O40和K5SiW11Fe(H2O)O39.结果表明电荷数少,保留值大;缓冲溶液的pH值和甲醇的浓度增大,四价钨硅酸离子的保留值降低,而八价钨硅酸离子在各种条件下保留值均不改变,缓冲溶液的pH值在3.76和4.66之间,所获色谱峰最佳.     

氨基酸基咪唑离子液体氧化萃取脱硫研究

通过离子交换法制备以天冬氨酸(Asp)、组氨酸(His)、甘氨酸(Gly)、色氨酸(Try)为阴离子的氨基酸咪唑离子液体,与H_2O_2协同深度去除模拟汽油中的二苯并噻吩(DBT)。对合成的氨基酸咪唑离子液体进行了FT-IR、1H NMR表征,并优化氧化脱硫工艺条件。结果表明,与以组氨酸、甘氨酸和色氨酸作为离子液体的阴离子相比,天冬氨酸作为阴离子时,离子液体与H_2O_2体系的催化萃取脱硫效果最好。通过对反应温度、H_2O_2/模拟油体积比和反应时间的工艺优化,探讨了[C_8mim]Asp和H_2O_2催化萃取脱硫的效果,最优工艺条件下,脱硫率可达96.5%。[C_8mim]Asp离子液体再生循环7次后脱硫率仍能保持在93.7%。对[C_8mim]Asp和H_2O_2协同催化脱硫机理的研究发现,[C_8mim]Asp的羧基与双氧水反应成过氧化羧基,将二苯并噻吩氧化成为二苯并噻吩砜,从而达到脱硫的目的。     

固载杂多酸催化性能的研究

在气相体系中考察了固载于活性炭 (C)上的磷钨 (PW12 )、硅钨 (SiW12 )及磷钼 (PMo12 )杂多酸对异丙醇脱水反应的催化性能 .不加水时主要生成丙烯 ;加入适量的水有助于降低丙烯而提高异丙醚的选择性 ;催化活性除与酸性有关外 ,与杂多酸的特殊结构“假液相”模型密切相关     

杂多酸盐修饰骨架镍催化剂上肉桂醛的选择加氢

研究了杂多酸盐改性：Raney Ni催化剂上肉桂醛选择加氢制备肉桂醇的反应，考察了杂多酸盐负载量、反荷阳离子、杂多阴离子对RaneyNi催化剂上肉桂醛加氢活性和选择性的影响，结果表明：随着Cu1.5PMo12O40负载量增加，肉桂醛加氢沽性降低而生成肉桂醇的选择性增加，当Cu1.5PMo12O40负载量达到6．3％时，肉桂醇的选择性达到了26．4％，而没有改性的RaneyNi催化剂上肉桂醛加氢生成肉桂醇的选择性为零；在各种不同反荷阳离子的PM012盐中，只有反荷阳离子为Cu2 的Cu1.5PMo12O40改性Raney Ni催化剂具有最高的选择性，在选定的四种杂多阴离子的铜盐中，Cu2SiMo12O40和Cu2SiW12O40改性Raney Ni催化剂的选择性为零，Cul．5PW12O40改性Raney Ni催化剂上肉桂醛加氢生成肉桂醇的选择性也比Cu1.5PMo12O40改性Raney Ni的低的多．     

甘氨酸的杂多酸超分子化合物的合成及性质研究

首次合成了甘氨酸的Keggin结构杂多酸超分子化合物(HGly)3[PW12O40]·5H2O(HGly)4[SiW12O40]·4H2O,用元素分析,IR,UV,TG-DTA,XRD和NMR等方法对标题化合物进行了表征,并讨论了它们的合成条件及结构特性.     

聚金属氧酸盐[(C_4H_9)_4N]_6[PMo_(12)O_(40)]_2·0.5H_2O的晶体结构

在乙腈-水混合溶剂中培养得到了聚金属氧酸盐[(C4H9)4N]6[PMo12O40]2.0.5H2O的单晶.X射线衍射结构分析表明,该晶体属于单斜晶系,C2/c空间群,晶胞参数:a=4.996(10)nm,b=1.411(3)nm,c=2.633(5)nm,β=114.804(4)°,V=16.844 nm3,Z=1,R1=0.0843,wR2=0.2546.化合物分子由两个多阴离子[PMo12O40]3-,6个四丁基胺阳离子[n-Bu4N]+和0.5个结晶水组成.     

杂多酸钾杯芳烃衍生物的合成、结构及电化学性质

以3种Keggin型杂多酸钾和杯芳烃四乙酸乙酯衍生物(C60H80O12, L)为原料, 合成了一个杯-簇型无机-有机杂化配合物和两个杯-簇-杯型主-客体配合物: [L-K1.5]4[HPW12O40]3·CH3COCH3(1), [L-K2]2·[SiW12O40]·2CH2Cl2·CHCl3(2)和[L-K1.5]2[PMo12O40]·2CHCl3(3). 通过元素分析、IR、TG-DTA和X射线衍射等手段对配合物进行了表征, 测得了其晶体结构. 研究结果表明, 配合物1中杯芳烃衍生物钾配阳离子与Keggin型磷钨酸多阴离子属典型的无机-有机杂化结构. 钾离子完全进入杯芳烃衍生物的空腔, 并与氧原子形成配位键, 多阴离子则表现为相对孤立的阴离子簇, 其金属氧簇结构基本保持不变. 配合物2和3的结构中杯芳烃衍生物钾配阳离子和多酸阴离子具有杯-簇-杯排列方式. 两个钾离子以配位串的方式进入杯芳烃衍生物的空腔, 并与氧原子形成配位键, 多阴离子簇则位于两个配阳离子中间, 对发生客居的钾离子串起着约束的作用. 电化学结果表明, 配合物1在1.0 mol/L H2SO4溶液中的氧化还原峰电流与扫速的平方根成线性关系, 电极反应为扩散控制过程; 配合物2和3在2.0 mol/L H2SO4溶液中的氧化还原峰电流与扫速成线性关系, 为表面控制过程. 说明电极反应与配合物的结构密切相关.     

基于Keggin阴离子链镍化合物的结构和质子导电性

由H+(H2O)2.5阳离子,[Ni(H2O)8]2+阳离子,[PW12O40]3-阴离子和异烟酸氮氧化物(HINO)自组装成一个具有质子导电性的化合物{[Ni(H2O)8][H(H2O)2.5](HINO)4(PW12O40)}n。293 K的单晶X-射线衍射分析表明标题化合物形成1个带有一维通道的三维氢键网络结构。[PW12O40]3-阴离子填充在一维通道内并且自组装成多阴离子链。热重分析表明在20~100℃范围内化合物没有失重,表明化合物结构单元内所有的水分子在100℃以下不易失去。标题化合物在85~100℃范围内表现出好的离子导电性(1×10-3~2×10-3S.cm-1)。     

新型苯并咪唑杂多酸盐离子液体的制备及其在催化合成己二酸中的应用

以1-丁基苯并咪唑为起始原料,合成了1-丁基-3-(4-磺酸基丁基)苯并咪唑內盐(1),1-丁基-3-羧甲基苯并咪唑氯盐(2)和1,3-二丁基苯并咪唑溴盐(3);1~3分别与硅钨酸、磷钨酸和磷钼酸在水或者乙醇中反应,合成了5种新型的杂多酸盐离子液体——1-丁基-3-(4-磺酸基丁基)苯并咪唑硅钨酸盐(4a),1-丁基-3-(4-磺酸基丁基)苯并咪唑磷钨酸盐(4b),1-丁基-3-(4-磺酸基丁基)苯并咪唑磷钼酸盐(4c),1-丁基-3-羧甲基苯并咪唑硅钨酸盐(5)和1,3-二丁基苯并咪唑硅钨酸盐(6),其结构经1H NMR,13C NMR和IR表征。并考察了4~6在30%H_2O_2催化氧化环己烯制备己二酸反应中的催化效果。实验结果表明:4b的催化效果最好。在最佳反应条件[环己烯20 mmol,4b 0.16 mmol,n(环己烯)∶n(H2O2)∶n(ILs)=1∶4.4∶0.008]下,己二酸产率71%。     

Selective precipitation of prions by polyoxometalate complexes

The efficacy of a variety of polyoxometalate anions in selectively precipitating the infectious isoform of the prion protein (PrPSc) over the normal, cellular protein (PrPC) was tested as a means of improving the sensitivity of a conformation-dependent immunoassay (CDI). Experiments utilizing neutralized aqueous solutions containing MgCl2.6H2O and Na2H[PW12O40] (1) indicated that use of the former is detrimental to selectivity, while use of the latter gives optimal selectivity at a concentration of 2.48% w/v, much higher than the 0.31% w/v employed in the current CDI protocol. Similar experiments using Na4[SiW12O40] (2), K5[BW12O40] (3), and Na6[H2W12O40] (4) were performed to probe the role of charge density in polyoxometalate anions possessing the Keggin structure. These, coupled with assignment of solution structures via NMR and infrared spectroscopy, revealed the following trend in optimal concentrations: [HBW11O39]8- < [SiW11O39]8- < [PW11O39]7- = [H2W12O40]6-. Interestingly, use of the salts K10[Zn4(H2O)2(PW9O34)2] (5), Na16[Zn4(H2O)2(P2W15O56)2] (6), and Na27[NaAs4W40O140] (7), containing larger polyoxometalate anions, was found to suppress PrPSc precipitation in a concentration-dependent manner. Taken together, the results suggest a precipitation mechanism wherein Keggin-type anions link multiple PrPSc moieties by binding a somewhat hindered cleft featuring one or more positively charged residues.     

Tetravalent metal complexation by Keggin and lacunary phosphomolybdate anions

We report the synthesis, spectroscopic and structural characterization, and computational analysis of a series of phosphomolybdate complexes with tetravalent metal cations. The reaction between Ce (IV) and Th (IV) with phosphomolybdate at the optimum pH for the stabilization of the lacunary heteropolyoxometalate anion, [PMo 11O 39] (7-), results in the formation of compounds containing the anions [Ce(PMo 11O 39) 2] (10-) and [Th(PMo 11O 39) 2] (10-), respectively. Single crystal X-ray diffraction analysis was performed on salts of both species, Cs 10[Ce(PMo 11O 39) 2].20H 2O and (NH 4) 10[Th(PMo 11O 39) 2].22H 2O. In both anionic complexes the f-block metal cation is coordinated to the four unsaturated terminal lacunary site oxygens of each [PMo 11O 39] (7-) anion, yielding 8 coordinate sandwich complexes, analogous to previously prepared related complexes. Spectroscopic characterization points to the stability of these complexes in solution over a reasonably wide pH range. Density functional analysis suggests that the Ce-O bond strength in [Ce(PMo 11O 39) 2] (10-) is greater than the Th-O bond strength in [Th(PMo 11O 39) 2] (10-), with the dominant bonding interaction being ionic in both cases. In contrast, under similar reaction conditions, the dominant solid state Zr (IV) and Hf (IV) complexes formed contain the anions [Zr(PMo 12O 40)(PMo 11O 39)] (6-) and [Hf(PMo 12O 40)(PMo 11O 39)] (6-), respectively. In these complexes the central Group 4 d-block metal cations are coordinated to the four unsaturated terminal lacunary site oxygens of the [PMo 11O 39] (7-) ligand and to four bridging oxygens of a plenary Keggin anion, [PMo 12O 40] (3-). In addition, (NH 4) 5{Hf[PMo 12O 40][(NH 4)PMo 11O 39]}.23.5H 2O can be crystallized as a minor product. The structure of the anion, {Hf[PMo 12O 40][(NH 4)PMo 11O 39]} (5-), reveals coordination of the central Hf (IV) cation via four bridging oxygens on both the coordinated [PMo 11O 39] (7-) and [PMo 12O 40] (3-) anions. Unusually, the highly charged lacunary site remains uncoordinated to the Hf metal center but instead interacts with an ammonium cation. (31)P NMR indicates that complexation of the Keggin anion, [PMo 12O 40] (3-), to Hf (IV) and Zr (IV) will stabilize the Keggin anion to a much higher pH than usually observed.     

Novel charge transfer supramolecular assemblies with Keggin anions and 2-amino-5-nitropyridine

Several novel compounds with the non-linear optical chromophore 2-amino-5-nitropyridine (2A5NP) and Keggin polyoxoanions (alpha-isomers), having the general formula (2A5NP)(m)H(n)[XM12O40].xH2O, M = Mo, W, were synthesised. Compounds were obtained with X = P, n = 3, m = 3 and 4 and X = Si, n = m = 4 (x = 2-6). Thus, for each of the anions [PMo12O40]3- and [PW12O40]3- two different compounds were obtained, with the same anion and organic counterpart but with a different stoichiometric ratio. These presented different charge transfer properties and thermal stability. All compounds were characterised by spectroscopic and analytical techniques. The single crystal X-ray diffraction structure of (2A5NP)4H3[PMo12O40].2.5H2O.0.5C2H5OH showed that the water solvent molecules and the organic chromophores are assembled via infinite one-dimensional chains of hydrogen bonds with formation of open channels, which accommodate [PMo12O40]3- and ethanol solvent molecules.     

VO(H2O)5]H[PMo12O40]-catalyzed nitration of alkanes with nitric acid

[VO(H2O)5]H[PMo12O40], which contains vanadyl counter cations and PMo12O40(3-), can act as a catalyst for the nitration of various alkanes including alkylbenzenes using nitric acid as a nitrating agent in acetic acid at 356 K.     

Cation-anion interactions in 1-ethyl-3-methylimidazolium trifluoromethanesulfonate-based ionic liquid electrolytes

An important step in developing ionic-liquid-based electrolytes for lithium rechargeable batteries is obtaining a molecular-level understanding of the ionic interactions that occur in these systems. In this study, 1-ethyl-3-methylimidazolium trifluoromethansulfonate ([C2mim]CF3SO3) is complexed with LiCF3SO3, and the local structures of the CF3SO3- and [C2mim]+ ions are investigated with infrared and Raman spectroscopy. The isolation and subsequent refinement of a Li[C2mim](CF3SO3)2 crystal provides further insight into the structure of the [C2mim]CF3SO3-LiCF3SO3 solutions. Minor changes are observed in the infrared and Raman spectra of dilute [C2mim]CF3SO3-LiCF3SO3 solutions compared to pure [C2mim]CF3SO3. However, a suspension of very small Li[C2mim](CF3SO3)2 crystallites forms at a solution composition of [C2mim]CF3SO3:LiCF3SO3 = 10:1 (mole ratio), placing an upper limit on the solubility of LiCF3SO3. Essentially no changes are observed in the vibrational modes of the [C2mim]+ cations over the entire range of LiCF3SO3 compositions studied, suggesting that the addition of these compounds does not significantly perturb the local structure of the [C2mim]+ cations. The salt used in this study has a common anion with the ionic liquid; thus, the ion cloud surrounding the [C2mim]+ ions, which must be primarily composed of CF3SO3- anions, is not significantly altered with the addition of LiCF3SO3.     

Redistribution and fluxionality in heteropolyoxoperoxo complexes: [PO4[M2O2(mu-O2)2(O2)2]2]3- with M = Mo and/or W

When peroxotetramolybdophosphate, [(n-C4H9)4N]3[PO4[Mo2O2(mu-O2)2(O2)2]2], denoted (NBu4)3PMo4, and its tungsten(VI) analogue, (NBu4)3PW4, are mixed in acetonitrile at room temperature, redistribution occurs with the formation of three mixed-addenda species [PO4[Mo4-xWxO20]]3- (x = 1-3). The temperature dependence of the phosphorus-31 NMR spectra of a 1 1 mixture and of the pure salts, (NBu4)3PMo4 or (NBu4)3PW4, shows that [MO(O2)2] species are in chemical exchange, as are the [MOp] units of certain heteropolyacids (e.g. H3[PMo12O40] x aq and H3[PW12O40] x aq). However, there is no chemical exchange between free phosphate and [MO(O2)2] species in these systems; but there is fluxional behaviour involving PMo2W2, PMo4 and PW4. This is attributed to the rapid equilibrium between isomers (PMo2W2) and to equilibrium between anionic structures with tridentate (mu-eta2:eta1-O22-) and bidentate (eta2-O22-) modes of coordination for the two peroxo groups of the [M2O2(mu-O2)2(O2)2] moieties.     

Electrochemical study of multilayer films built on glassy carbon electrode with polyoxometalate anions and two multi-charged molecular cationic species

Electrochemical results are reported on complex films built onto glassy carbon electrodes. Each film involves one polyoxometalate and one or two cations : methyl viologen and meso-tetra(4N-methylpyridyl porphyrin). In a given film, layers of polyoxometalate anions alternate with layers made of one of the two cations. Electrochemical studies indicate the effective building of films with polyoxometalate and both cations present. They also demonstrate that, in the film building process, the electrochemical response of every new layer is influenced by coulombic interactions and conducting properties with the immediately underlying layer.     

骨架金属原子对Keggin阴离子电子结构和物化性质的研究

使用第一原理密度泛函理论中的离散变分方法(DFT-DVM)对(PM~1~2O~4~0)^n^-(M=Mo,W,V),(PMo~9W~3O~4~0)^3^-,(PMo~9V~3O~4~0)^6^-五种Keggin结构杂多阴离子进行了电子结构计算,讨论了骨架金属原子对Keggin结构杂多阴离子的电荷分布、成键作用、热稳定性、氧化还原性等的影响。结果表明,骨架金属原子对Keggin阴离子的电荷分布和成键作用均有一定的影响,以Mo,W,V作骨架金属原子的Keggin阴离子(PM~1~2O~4~0)^n^-的热稳定性顺序为:(PW~1~2O~4~0)~3^->(PMo~1~2O~4~0)^3^->(PV~1~2O~4~0)^1^5^-。提出了判断杂多阴离子氧化性强弱的两因素法---脱出晶格氧的难易程度和LUMO轨道电负性,并根据两因素法得到氧化性强弱顺序为:(PV~1~2O~4~0)^1^5^->(PMo~1~2O~4~0)^3^->(PW~1~2O~4~0)~3^-。同时,讨论了当(PMo~1~2O~4~0)~3^-中的Mo部分被W和V取代后,即(PMo~9W~3O~4~0)^3^-,(PMo~9V~3O~4~0)^6^-,其中取代原子对电子结构的影响,结果表明,W取代使整个阴离子的稳定性增强,但氧化性减弱,V取代,使稳定性减弱,但氧化性增强。