散斑条纹的快速高精度处理技术

本文提出一种快速高精度散斑杨氏条纹(斑纹)场处理方法——同态阀值滤波法。用它实现了散斑场条纹的快速、逐点连续高精度处理。     

Electric Dipole Moment of W-boson Through Neutral Higga-Boson Exchange

We compute the electric dipole moment generated at two-loop for the W-boson in the Weinberg-Higgs model in which the CP violation is mediated by neutral Higgs-boson exchange. We also compare our results with the others relative to the problem in the literature     

Immobilization of catalase on membranes of poly(ethylene)-g-co-acrylic acid and poly(tetrafluoroethylene)-g-co-acrylic acid and their application in hydrogen peroxide electrochemical sensors

The immobilization of catalase on grafted membranes of poly(ethylene)-g-co-acrylic acid and poly(tetrafluoroethylene)-g-co-acrylic acid and their application in hydrogen peroxide electrochemical sensors is described. The introduction of carboxylic acid groups onto a hydrophobic support provides a good environment for subsequent enzyme immobilization. This single membrane, hydrogen peroxide sensor showed significant improvement with respect to the double membrane versions. The response is very rapid, the linear range being from 10 μM up to 6 mM, with a detection limit of 4.7 μM, and a lifetime of more than 4 months.     

线列阵甚宽频带恒定束宽的数字实现方法

线性嵌套阵可以很好地在很宽的频率（N个倍频程，N=7）上实现恒定束宽。这种方法设计简单，又节省线阵阵元。本文给出了线性嵌套阵具体的数字化实现方法，解决了FIR滤波器设计，滤波器时间延迟等问题。由于数字化实现过程中使用了很多组FIR滤波器，计算量很大，文章采用了DSP信号处理板实现数字化算法，利用DSP处理板可以多任务同时处理优势，解决了计算量大的问题。经过实验验证，在DSP上实现的数字化的线性嵌套阵宽带恒定束宽方法满足了工程上实时处理的需要。     

聚乙炔的CH面外振动红外光谱研究

采用从头计算方法，计算了反式和顺式聚乙炔的氢原子在垂直于聚乙炔分子面方向振动的红外光谱，计算表明，Gibson等用红外吸收实验所测得的谱线的确是聚乙炔的CH面外振动产生的谱线，经100℃长时间加热后，顺式聚乙炔变为反式聚炔，但波数为740cm^-1的谱级仍保留5％的强度。     

Ce偶-偶同位素低激发态性质的IBM2描述

通过考虑同类核子相干对间的四极相互作用，在IBM2中对Ce偶－偶同位素^128Ce-^138Ce的低激发态能谱和E2跃迁几率及分支比进行了理论分析，计算结果有效地改善了IBM中这些核的γ带能谱的Staggering现象描述，与实验观察到的低激发态结果基本一致。     

宁波港船舶交通管理系统(VTS)

通过对宁波港的交通环境，现有VTS系统及港口发展的趋势研究，提出了改善宁波港通航环境，建立和完善VTS系统的有效措施。     

多目标最优化的一种积分型实现算法

在文[1]中给出了求解多目标最优化的一种积分总极值的概念性算法．本文利用数论中的一致分布佳点集列，较为简便的得出了多目标最优化的积分总极值的实现算法和算法终止准则．并经过有关函数数值计算表明该算法是有效的，可用来求解多目标最优化问题的有效解．     

Photocatalytic Synthesis of Oxygenates from Gaseous CO2 and CH4 over Semiconductor

Photoinduced synthesis of CO2 and CH4 was investigated using a batch reaction system on several photoactive materials supported on silicon dioxide. Single semiconductor showed higher selectivity to C1 compounds. The production of C2-C3 oxygenates took place preferentially on composite semiconductor photocatalysts. In particular, it was found that acetone was the primary product over Cu/CdS-TiO2/SiO2.     

芳环羟基化HPLC分离荧光法检测Cu(Ⅱ)-H2O2体系中产生的·OH

采用L-苯丙氨酸为探针,使用液相色谱分离荧光检测(FLD)和荧光分光光度分析(FS)两种方法平行检测Cu(Ⅱ)-H2O2 体系中产生的·OH.试验采用的激发波长277 nm,发射波长306 nm.体系在反应前后的荧光变化,可反映·OH产生量.对FLD与FS所得数据进行了比较分析,结果显示两种方法具有较高一致性.FS使用混合体系检测,易对荧光的产生造成干扰,而FLD法没有干扰.