A comprehensive study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre composites

The results of an extensive experimental study of the free running Nd:YAG laser drilling of a multi-layer carbon fibre composite, where adjacent layers have differently orientated fibres, are reported. For holes drilled with the laser operating in fixed-Q mode at 1064 nm, parallel sections of blind holes illustrating discontinuities in the hole size along a given section direction will be shown to occur at the interface between adjacent layers. An explanation for this effect is proposed. Detailed single pulse drilling characteristics will be presented illustrating the exit hole diameter as a function of pulse energy and material thickness. These characteristics illustrate a ‘stable' drilling regime in which the exit hole diameters are least sensitive to changes in pulse energy or material thickness and a less ‘stable' regime in which they are more strongly dependent on these parameters. Drilling characteristics will be given for two different beam qualities, illustrating the greater drilling depth and reduced hole size achievable with an improved beam quality. Finally holes drilled through a 2 mm thick sample of material with multiple pulses are considered. Size distribution curves for entrance and exit holes will be presented. The total energy required (number of pulses × pulse energy) to drill through 2 mm thick material will be reported as a function of pulse energy in stationary air and argon atmospheres and in a partial vacuum, illustrating a threshold energy which is dependent upon the drilling atmosphere. The threshold energies will be discussed with reference to plasma formation and the reactivity of the drilling atmosphere.     

GAUSSIAN WHITE NOISE CALCULUS OF GENERALIZED EXPANSION

A new framework of Gaussian white noise calculus is established, in line with generalized expansion in [3, 4, 7]. A suitable frame of Fock expansion is presented on Gaussian generalized expansion functionals being introduced here, which provides the integral kernel operator decomposition of the second quantization of Koopman operators for chaotic dynamical systems, in terms of annihilation operators dt and its dual, creation operators t*.     

测定麦芽糖转糖苷反应体系组成的高效液相色谱法

建立了分析低聚异麦芽糖组成的高效液相色谱法，采用Spherisorb-NH2色谱柱，示差折光检测器，乙腈－水（体积比70：30）为流动相，外标法定量测定；结果显示各糖质量浓度在0．1－10g/L范围内与峰面积呈良好线性关系，相关系数为0．999 0－0．999 7；应用法跟踪了pH5．0的柠檬酸－柠檬酸钠缓冲溶液中以α－葡萄糖转苷酶为催化剂在58℃温度下的麦芽糖转糖苷反应，分析了反应体系组成随时间的变化，得到了上述反应条件下麦芽糖最大限度地转化为低聚异麦芽糖的最佳反应时间为24h；该法快捷、简单、准确，可用于低聚异麦芽糖生产的质量控制。     

熔融LiCl及其急冷非晶键取向序的分子动力学模拟研究

本文进一步讨论了我们新近提出的等近邻数键球谐函数方法,并通过分子动力学模拟研究了熔融LiCl及其急冷过程。对计算机模拟各时间步产生的瞬态构型进行平均,计算了不同温度下键序Q_l谱.将模拟Q_l谱与线性组合模型Q_l谱比较,观察到模拟Q_l谱与含90％局部正四面体结构的组合模型十分相似,表明熔融Licl及其急冷非晶中局部键取向序明显倾向于正四面体序。急冷过程中不同温度下局部键取向序可用同一线性组合模型描述,但模型方差随模拟温度明显变化。方差随温度而降低,且在发生玻璃态转变时有一显著下降。不同温度下的键角分布也作了计算,观察到键角分布在109°(正四面体局部结构键角)附近且分布峰随温度升高而展宽,与键序Q_l得到的结论一致。     

光纤面板传输机理研究(Ⅱ)

本文在文献[1]研究的基础上,建立了光纤面板的结构模型。利用光学信息理论,研究了光纤面板的传输机理。通过分析、计算光纤面板传输的光学信息量,给出了光纤面板传递最大信息量时的最佳结构参数和扩散参量。     

Correlations between dynamical properties and features of potential energy surfaces for the light atom transfer reactions O+HCl→OH+Cl AND Cl+HCl→ClH+Cl

A three-dimensional quasiclassical trajectory study of the dynamics of the light atom transfer reaction O(³P) + HCl(ν=0)→ OH + Cl was carried out employing two LEPS potential energy surfaces (I and II). Attention was focused mainly on three-dynamical properties; the oscillatory behavior of partial cross sections as a function of collision energy; the rotational excitation of the products; and the influence of reagent rotation on reactivity. Distinct differences were found between surfaces I and II with respect to these properties. The examination of individual trajectories indicated that there is a significant difference in the nature of these surfaces. While surface I is governed by weak repulsive forces, surface II is governed by strong attractive forces which tend to direct the reactants toward a collinear geometry. The present results confirm conclusions reached from an earlier study of the reaction Cl+HCl→ClH+Cl concerning correlations between dynamical properties and features of potential energy surfaces. For surfaces of the type that we termed HREP, since they are of repulsive nature and they lead to highly rotationally excited products, no significant oscillations of partial cross sections are obtained and reagent rotation promotes the reaction. On the other hand, for surfaces of the type that we termed COLD (collinearly directing), since they tend to direct the reactants toward a collinear geometry and form rotationally “cold” products, significant oscillations of partial cross sections are obtained and reagent rotation causes a decline in reactivity.     

激光产生的铝、硅、氧、铜、硒等离子体X光谱

利用长晶格的OHM晶体谱仪,从激光等离子体中获得丰富的铜、硒类氖、类氟、类钠离子的二、三、四级软X射线衍射光谱和铝、氧、硅的类氢、类氦、类锂离子一到四级谱,波长在14～40(?)之间,在此基础上,本文较为细仔地分析了各光谱结构.     

高斯型空间光孤子相互作用的数值研究

 通过数值模拟的方法，对高斯孤子在对数型饱和非线性介质中的相互作用进行了研究，考查了两光束间的相对振幅和相对相位对其相互作用的影响。结果表明：高斯孤子之间的相互作用敏感地依赖于两光束间的相对振幅和相对相位。在不同的振幅差异范围内，光束间的主要作用交替地表现为相互排斥和相互吸引，并由于高斯孤子的不稳定性，导致了光束在碰撞后以一种尺寸周期性变化的呼吸模式传输。随着相对相位的增大，两光束间始终持续地表现出强烈的排斥作用，直到相对相位增加到一个2π周期之后。而且碰撞之后，光束也都以呼吸模式进行传输，其分离的角度越大，呼吸就越明显。