Extraction of methyl xanthines and their UHPLC–DAD determination in consumable beverages used in Eastern province of Saudi Arabia

Coffee and tea are the most widely consumed beverages worldwide. However, the consumer may be unaware of the exact amount of methyl xanthine (MX, i.e. caffeine [C], theobromine [TB] and theophylline [TH]) consumed, as most of the products do not list the proper amounts. This may lead to serious risks including cardiovascular, kidney and stimulant effects. The aim of the study was to determine the MX amount in ready-to-use beverages (coffee and tea) collected from various outlets in the city of Al-Khobar, Saudi Arabia. Forty different samples of espresso, black coffee and red tea were collected. A fast, reliable and efficient UHPLC–DAD method was developed and validated for MX determination. Total lipids were extracted and fractionated in order to determine glycolipids, phospholipids and neutral lipids. The r² value for the method was 0.980–0.988 in a linearity range of 0.5–200 ppm. The range for MX (C [0.02–2.39 mg/ml], TB [0.00–0.10 mg/ml] and TH [0.00–0.004 mg/ml]) and total lipids was 1–5 g. The amount of glycolipids (3.1 g) was higher among the lipid fractions followed by phospholipids (1.8 g) and neutral lipids (0.25 g). In general, espresso beverages (20–30 ml) contained high amounts of MX whereas black coffee beverages contained high amount of lipids. Most of the beverages expressed C, TB, TH, lipids or their fractions; however, the product with high amounts of MX and lipids at the same time was espresso (brands Chemistry and Wogard). Although the MX and lipid levels in these beverages well below the allowed limits, care must still be taken, especially when using the beverages with high serving volumes (200–250 ml) or coffee prepared via the filter method i.e. black coffee, using a high temperature for a longer time.     

Correlations between dynamical properties and features of potential energy surfaces for the light atom transfer reactions O+HCl→OH+Cl AND Cl+HCl→ClH+Cl

A three-dimensional quasiclassical trajectory study of the dynamics of the light atom transfer reaction O(³P) + HCl(ν=0)→ OH + Cl was carried out employing two LEPS potential energy surfaces (I and II). Attention was focused mainly on three-dynamical properties; the oscillatory behavior of partial cross sections as a function of collision energy; the rotational excitation of the products; and the influence of reagent rotation on reactivity. Distinct differences were found between surfaces I and II with respect to these properties. The examination of individual trajectories indicated that there is a significant difference in the nature of these surfaces. While surface I is governed by weak repulsive forces, surface II is governed by strong attractive forces which tend to direct the reactants toward a collinear geometry. The present results confirm conclusions reached from an earlier study of the reaction Cl+HCl→ClH+Cl concerning correlations between dynamical properties and features of potential energy surfaces. For surfaces of the type that we termed HREP, since they are of repulsive nature and they lead to highly rotationally excited products, no significant oscillations of partial cross sections are obtained and reagent rotation promotes the reaction. On the other hand, for surfaces of the type that we termed COLD (collinearly directing), since they tend to direct the reactants toward a collinear geometry and form rotationally “cold” products, significant oscillations of partial cross sections are obtained and reagent rotation causes a decline in reactivity.     

Time-resolved ESR study of the lowest excited triplet states of para-quinones in glassy matrices at 77 k

The lowest excited nπ* triplet of 9.10-anthraquinone, 1.4-naphthoquinone and 1,4-benzoquinone were studied in glassy matrices at 77 K using a time-resolved ESR method. The D value of the triplet state of 9,10-anthraquinone varied from ?0.351 cm^?1 in a polar solvent to ?0.318 cm^?1 in a non-polar solvent. Both 1,4-naphthoquinone and 1,4-benzoquinone in polar solvents showed triplet state spectra with a D value of ?0.330 cm^?1. A computer simulation revealed the existence of widely distributed zero-field splitting parameters in the glassy condition. These data are compared with an analysis of CIDEP results of para-quinones.     

Ultraviolet laser desorption/ionization mass spectrometry of single‐core and multi‐core polyaromatic hydrocarbons under variable conditions of collisional cooling: insights into the generation of molecular ions,fragments and oligomers

The ultraviolet laser desorption/ionization of polyaromatic hydrocarbons (PAHs) has been investigated under different background pressures of an inert gas (up to 1.2 mbar of N₂) in the ion source of a hybrid, orthogonal‐extracting time‐of‐flight mass spectrometer (oTOF‐MS). The study includes an ensemble of six model PAHs with isolated single polyaromatic cores and four ones with multiple cross‐linked aromatic and polyaromatic cores. In combination with a weak ion extraction field, the variation of the buffer gas pressure allowed to control the degree of collisional cooling of the desorbed PAHs and, thus, to modulate their decomposition into fragments. The dominant fragmentation channels observed are related to dehydrogenation of the PAHs, in most cases through the cleavage of even numbers of C―H bonds. Breakage of C―C bonds leading to the fragmentation of rings, side chains and core linkages is also observed, in particular, at low buffer gas pressures. The precise patterns of the combined fragmentation processes vary significantly between the PAHs. The highest abundances of molecular PAH ions and cleanest mass spectra were consistently obtained at the highest buffer gas pressure of 1.2 mbar. The effective quenching of the fragmentation pathways at this elevated pressure improves the sensitivity and data interpretation for analytical applications, although the fragmentation of side chains and of bonds between (poly)aromatic cores is not completely suppressed in all cases. Moreover, these results suggest that the detected fragments are generated through thermal equilibrium processes rather than as a result of rapid photolysis. This assumption is further corroborated by a laser desorption/ionization post‐source decay analysis using an axial time‐of‐flight MS. In line with these findings, covalent oligomers of the PAHs, which are presumably formed by association of two or more dehydrogenated fragments, are detected with higher abundances at the lower buffer gas pressures. Copyright © 2014 John Wiley & Sons, Ltd.     

Cations in a Molecular Funnel: Vibrational Spectroscopy of Isolated Cyclodextrin Complexes with Alkali Metals

The benchmark inclusion complexes formed by α‐cyclodextrin (αCD) with alkali‐metal cations are investigated under isolated conditions in the gas phase. The relative αCD‐M⁺ (M=Li⁺, Na⁺, K⁺, Cs⁺) binding affinities and the structure of the complexes are determined from a combination of mass spectrometry, infrared action spectroscopy and quantum chemical computations. Solvent‐free laser desorption measurements reveal a trend of decreasing stability of the isolated complexes with increasing size of the cation guest. The experimental infrared spectra are qualitatively similar for the complexes with the four cations investigated, and are consistent with the binding of the cation within the primary face of the cyclodextrin, as predicted by the quantum computations (B3LYP/6‐31+G*). The inclusion of the quantum‐chemical cation disrupts the C₆ symmetry of the free cyclodextrin to provide the optimum coordination of the cations with the ‐CH₂OH groups in C₁, C₂ or C₃ symmetry arrangements that are determined by the size of the cation.     

DFT Study of the BH4− Hydrolysis on Au(111) Surface

The mechanism of the catalytic hydrolysis of BH₄⁻ on Au(111) as studied by DFT is reported. The results are compared to the analogous process on Ag(111) that was recently reported. It is found that the borohydride species are adsorbed stronger on the Au⁰-NP surface than on the Ag⁰-NP surface. The electron affinity of the Au is larger than that of Ag. The results indicate that only two steps of hydrolysis are happening on the Au(111) surface and the reaction mechanism differs significantly from that on the Ag(111) surface. These remarkable results were experimentally verified. Upon hydrolysis, only three hydrogens of BH₄⁻ are transferred to the Au surface, not all four, and H₂ generation is enhanced in the presence of surface H atoms. Thus, it is proposed that the BH₄⁻ hydrolysis and reduction mechanisms catalyzed by M⁰-NPs depend considerably on the nature of the metal.     

Search for supernova relic neutrinos at Super-Kamiokande

A search for the relic neutrinos from all past core-collapse supernovae was conducted using 1496 days of data from the Super-Kamiokande detector. This analysis looked for electron-type antineutrinos that had produced a positron with an energy greater than 18 MeV. In the absence of a signal, 90% C.L. upper limits on the total flux were set for several theoretical models; these limits ranged from 20 to 130 macro nu(e) cm(-2) s(-1). Additionally, an upper bound of 1.2 macro nu(e) cm(-2) s(-1) was set for the supernova relic neutrino flux in the energy region E(nu)>19.3 MeV.     

Quantum-chemical predictions of redox potentials of carbamates in methanol

Redox potentials for two stepwise anodic oxidations of a series of carbamates in methanolic solution have been calculated using ab initio and DFT quantum mechanical methods. Hartree-Fock method and Density Functional Theory at the B3LYP level, together with 6-31G(d), 6-31G(d,p) and 6-311++G(2df,2p) basis sets have been used for the calculation. The Polarizable Continuum Model (PCM) is used to describe the solute-solvent interactions of carbamates, and those of their radical-cations and cations. Linear relationships were observed between the theoretically predicted redox potential values and the corresponding anodic peak potentials obtained by cyclic voltammetry or the corresponding calculated energies of the Highest Occupied Molecular Orbital (HOMO) of these carbamates.     

Why not use point charge models for the determination of bond angles?

Bond angles of several free radicals have been estimated using the point charge model together with ESR data and compared with those derived by Coulson's equation and the INDO method. The model is found to work well in predicting bond angles for most radicals just like the INDO method. Some relationships between the model and the INDO method are discussed.     

Binding Selectivity of Macrocycle Ionophores in Ionic Liquids versus Aqueous Solution and Solvent‐free Conditions

The understanding of supramolecular recognition in room‐temperature ionic liquids (RTILs) is key to develop the full potential of these materials. In this work, we provide insights into the selectivity of the binding of alkali metal cations by standard cyclodextrin and calixarene macrocycles in RTILs. A direct laser desorption/ionization mass spectrometry approach is employed to determine the relative abundances of the inclusion complexes formed through competitive binding in RTIL solutions. The results are compared with the binding selectivities measured under solvent‐free conditions and in water/methanol solutions. Cyclodextrins and calixarenes in which the peripheral OH groups are substituted by bulkier side groups preferentially bind to Cs⁺. Such specific ionophoric behavior is substantially enhanced by solvation effects in the RTIL. This finding is rationalized with the aid of quantum mechanical calculations, in terms of the conformational features and steric interactions that drive the solvation of the inclusion complexes by the bulky RTIL counterions.