Morphological and Structural Studies of sPS/aPS Blends

Inrecentyears,thenewsedricrystallinepolymersyndiotacticp0lystyrene(sPS)hasat-ITactedmuchattentionduetoitsg0odchendcalresistanceandenhancedmechanicalperformanceatelevatedtemPeratUre.'H0wever,itexhibitshighbrittlenessandpoorimPact-resistanceandtCar-resistance.2Therefore,itisnecessarytomodifyitwithtougheningpolyIners.AsimPlemeth0dto0verc0methedriscibilityofatwo-phaseblendofsPSandatougheningpolymristotwrovetheinterfacialaffmity,wheretheadditionofablockcoP0lymerisconsideredtobemosteffective.3…     

氟硅烷自组装单分子膜的制备及其摩擦学性能

利用分子自组装技术制备了全氟辛酰胺丙基硅烷单分子膜,用X射线光电子能谱(XPS)对组装膜的表面元素进行了表征;接触角测试表明,该组装膜具有很好的疏水-疏油性,其对水的接触角高达105°,对正十六烷的接触角为50°.摩擦磨损实验结果表明,全氟辛酰胺丙基硅烷自组装单分子膜可以大大降低基片的摩擦系数,使载玻片的摩擦系数从0.85左右降低到0.14左右,而且低负荷下具有很好的耐磨性.     

火焰原子吸收光谱法研究五种螯合剂对染镉小鼠睾丸中镉钙铁锌浓度的影响

采用火焰原子吸收光谱法分别对染镉小鼠和N-对羟甲苯甲基-D-葡糖二硫代氨基甲酸钠(HBGD)、N-苯甲基-D-葡糖二硫代氨基甲酸钠(BGD)、二乙基二硫代氨基甲酸钠(DDTC)、二巯基丙醇(BAL)、乙二胺四乙酸(EDTA)等五种螯合剂治疗组小鼠睾丸中镉、钙、铁、锌等金属浓度进行了测定和研究.结果表明:镉染毒(Cd 2.5 mg·kg-1,腹腔注射)后,小鼠睾丸中镉、钙、铁、锌等金属浓度显著高于对照组(p＜0.05),染镉30 min后用各螯合剂治疗(0.400 mmol·kg-1,腹腔注射),24 h后除EDTA外,其余螯合剂能明显降低睾丸中镉的浓度并抑制钙、铁、锌浓度的增加(p＜0.05);染镉24 h后注射各螯合剂,治疗24 h后,HBGD、BGD和DDTC显著降低了小鼠睾丸中各金属浓度(p＜0.05);提示HBGD和BGD有望成为染镉中毒的理想解毒剂.     

QuEChERS/超高效液相色谱-串联质谱法同时测定水产品中四溴双酚A与六溴环十二烷

建立了同时测定水产品中四溴双酚A(TBBPA)和六溴环十二烷(HBCD)的超高效液相色谱-串联质谱方法。样品前处理采用QuEChERS方法,均质生物样品用水分散后加乙腈提取,经C_(18)分散固相萃取净化。采用CORTECS~?C_(18)色谱柱(4.6 mm×100 mm×2.7μm)分离,以甲醇-水为流动相进行梯度洗脱,流速为0.7 mL/min。采用电喷雾离子源,在负离子模式下以多反应监测(MRM)方式检测。结果表明,TBBPA和3种HBCD单体在0.5～500μg/L范围内线性良好,相关系数(r)大于0.998,检出限(LOD,S/N=3)和定量下限(LOQ,S/N=10)分别为0.04～0.16μg/kg和0.12～0.55μg/kg。在5、20、50μg/kg加标水平下的平均回收率为74.0%～121%,相对标准偏差(RSD)为0.20%～23%。该方法操作简单、快速、重现性好,适用于水产品中TBBPA和HBCD的快速检测。     

基于知识体系整合的元素无机化学教学改革

元素无机化学是大学化学及相关专业无机化学课程的核心内容。如何教好、学好元素无机化学的知识一直是教学工作者研究的课题。为改变教学现状，提高教学效果，培养学生的逻辑思维和科学创新能力，提出一种整合元素无机化学知识的思路，即：以化合物类型为主线对元素无机化学知识进行系统化整合，并以氧化物部分为例加以说明。     

Copper phosphonates with dinuclear and layer structures: a structural and magnetic study

Hydrothermal reactions of copper (II) nitrate with 1-hydroxycyclohexanephosphonic acid [C₆H₁₀(OH)PO₃H₂] or Δ¹-cyclohexenephosphonic acid [C₆H₉PO₃H₂] have resulted in three new copper phosphonates, namely, Cu(C₆H₁₀(OH)PO₃)(H₂O)₂ (1), Cu(C₆H₁₀(OH)PO₃) (2) and Cu(C₆H₉PO₃)(H₂O) (3). Compound 1 has a dinuclear structure in which two {CuO₅} square pyramids are bridged by two {CPO₃} tetrahedra through corner sharing. The dimers are connected through intermolecular hydrogen bonds, forming supramolecular layers. Both compounds 2 and 3 show layer structures typical for metal mono-phosphonates, in which the inorganic metal-containing layers are separated by cyclohexane or cyclohexene groups. The magnetic studies show that ferromagnetic interactions are mediated between copper centers in compound 1. In compounds 2 and 3, antiferromagnetic interactions are dominant.     

Solvent-mediated folding of a doubly charged anion

The microsolvation of the suberate dianion, -O2C(CH2)6CO2-, with two separate charge centers was studied by photoelectron spectroscopy and molecular dynamics simulation one solvent molecule at a time for up to 20 waters. It is shown that the two negative charges are solvated in the linear suberate alternately. As the solvent number increases, the negative charges are screened and a conformation change occurs at 16 waters, where the cooperative hydrogen bonding of water is large enough to overcome the Coulomb repulsion and pull the two negative charges closer through a water bridge. This conformation change, revealed both from the experiment and from the simulation, is a manifestation of the hydrophilic and hydrophobic forces at the molecular level.     

9-氧代桉烷-4-烯-3-酮类似物的DDQ脱氢重排反应机理研究

我们在研究 9-氧代桉烷 - 4-烯 - 3 -酮类化合物的 2 ,3 -二氯 - 5 ,6 -二腈基 - 1 ,4-苯醌 (DDQ)脱氢反应时[1] ,发现 1 4-降桉烷 - 4,1 1 -二烯 - 3 ,9-二酮及其 1 0 - Epimer在 DDQ脱氢条件下发生迁移重排反应 ,生成酚类化合物 .反应式如下 :DDQ脱氢反应已被详细研究 ,并被广泛地用于有机合成中 [2～ 5] ,但这种脱氢重排反应尚未见文献报道 .为了深入研究该反应 ,提出可能的重排机理 .我们参照文献 [6～ 1 0 ]方法 ,用 MVK和 EVK与相应的 2 -甲基 - 1 ,3 -二酮进行 Robinson成环反应 ,合成了一系列具有类似结构的化合物 ,并与 DD…     

磁性纳米固体酸SO42--TiO2-Fe3O4催化剂的合成、表征及催化性能的研究

首先研究制备了Fe3O4和SO42--TiO2固体酸催化剂,在此基础上采用共沉淀和浸渍的方法制备了磁性和超细SO42--TiO2-Fe3O4固体酸催化剂。利用XRD,TEM和FT-IR等分析测试手段对催化剂的结构和性能进行了表征。测定结果证实该催化剂具有较小的粒度,较高的磁性表现。在乙酸丁酯合成反应中SO42--TiO2-Fe3O4展示了很高的催化活性(酯化率可达82.7%),而且利用Fe3O4的磁性可对催化剂进行分离和回收.     

水合醋酸铈直接热分解制备超细氧化铈及其抛光性能

Ultra fine ceria was prepared by calcining hydrate cerium acetate. The effects of pyrolysis temperature on the particle size, morphology, specific surface area and loose packing density of ceria were investigated, and the removal rate of optical glasses polishing by ceria was determined. The results show that with the increase of pyrolysis temperature, the loose deposit density and crystallinity increases and the specific surface area decreases, however, the particle size decreases firstly and then increases, the minimum medium particle size D₅₀ is 0.47 μm at pyrolysis temperature of 1 000 ℃. The SEM images of ceria prepared by the decomposition at 800 ℃ or at 1 100 ℃ show porous powders or quasi-sphere small particles with loosely agglomeration, respectively. It was found that the removal rate varied with pyrolysis temperature in preparation of ceria and the property of glass polished. The removal rate for three kinds of glasses was in the order of ZF7> F1> K9, and the maximum value appeared at around 1 000 ℃ for ZF7 and F1, and at around 1 100 ℃ for K9.